SUPER FAST GLASS PASSIVATED RECTIFIER SF11G/RG THRU SF18G/RG VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere FEATURES • • • • • • • DO-41 R-1 Super fast switching speed Glass passivated chip junction Low power loss, high efficiency Low leakage High surge capacity High temperature soldering guaranteed 260℃/10 second, 0.375″(9.5mm) lead length SF11G Packing DO-41, SF11RG Packing R-1. MECHANICAL DATA • • • • • • Case: Transfer molded plastic Epoxy: UL94V-0 rate flame retardant Polarity: Color Band denotes cathode end Lead: Plated axial lead, solderable per MIL-STD-202E method 208C Mounting position: Any Weight: 0.012ounce, 0.33 gram Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • • Ratings at 25℃ ambient temperature unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% SF SF SF SF SF SF SF SF SYMBOLS UNIT 11G/RG 12G/RG 13G/RG 14G/RG 15G/RG 16G/RG 17G/RG 18G/RG Maximum Repetitive Peak Reverse Voltage VRRM 50 100 150 200 300 400 500 600 Volts Maximum RMS Voltage VRMS 35 70 105 140 210 280 350 420 Volts Maximum DC Blocking Voltage VDC 50 100 100 200 300 400 500 600 Volts Maximum Average Forward Rectified Current 0.375″(9.5mm) lead length at T A=55℃ Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage at 1.0A Maximum DC Reverse Current at rated DC Blocking Voltage at TA = 25℃ TA = 125℃ Maximum Reverse Recovery Time Test conditions lF=0.5A, lR=1.0A, lRR=0.25A Typical Junction Capacitance (Measured at 1.0MHz and applied reverse voltage of 4.0V) Typical Thermal Resistance (NOTE 1) Operating Junction Temperature Range Storage Temperature Range I(AV) 1.0 Amps IFSM 30 Amps VF 0.95 1.25 1.7 Volts IR 5.0 50 µA trr 35 nS CJ RθJC TJ TSTG 15 10 60 (-55 to +150) (-55 to +150) Notes: 1. Thermal resistance from junction to ambient with 0.375″(9.5mm) lead length, PCB mounted. E-mail: [email protected] Web Site: www.cnmic.com pF ℃/W ℃ ℃ SUPER FAST GLASS PASSIVATED RECTIFIER SF11G/RG THRU SF18G/RG VOLTAGE RANGE 50 to 1000 Volts CURRENT 1.0 Ampere RATING AND CHRACTERISTIC CURVES SF11G/RG THRU SF18G/RG FIG.2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE 1.2 0.8 0.6 0.4 Single Phase Half Wave 60Hz Resistive or Inductive Load 0.375″(9.5mm) Lead Length 0.2 30 CURRENT, (A) 1.0 (A) AVERAGE FORWARD CURRENT, FIG.1-TYPICAL FORWARD CURRENT DERATING CURVE 8.3ms Single Half Sine-Wave (JEDEC Method) T= T jmax 20 10 1 Cycle 0 25 0 100 75 50 55 175 150 125 0 1 2 AMBIENT TEMPERATURE, (° C) 4 6G -1 G /R G 15 SF F1 7G G /R G TJ =25° C 0.1 40 20 60 100 Pulse Width=300us 1% Duty Cycle 0.01 100 TJ =125° C 10 (μA) INSTANTANEOUS REVERSE CURRENT, /R G G /R 4G -1 RG G/ 11 SF (A) INSTANTANEOUS FORWARD CURRENT, S /R 8 -1 10 CHARACTERISTICS 10 G 8 FIG.4-TYPICAL REVERSE FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 1.0 6 NUMBER OF CYCLES AT 60 Hz 1.0 TJ =25° C 0.1 0 0.001 0.4 20 40 60 80 120 100 140 PERCENT OF RATED PEAK 0.6 0.8 1.0 1.2 1.4 1.6 1.8 REVERSE VOLTAGE,(%) INSTANTANEOUS FORWARD VOLTAGE,(V) FIG.5-TYPICAL JUNCTION CAPACITANCE 100 JUNCTION CAPACITANCE,(pF) SF11G-SF14/G F1G.6-TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC SF15G-SF18/G Trr 50Ω 10Ω NONINDUCTIVE NONINDUCTIVE +0.5A (-) 10 (+) 25 Vdc (approx.) (-) T J =25° C f=1MHz Vsig=50mVp-p 1.0 1Ω NON INDUCTIVE PULSE GENERATIOR (NOTE 2) 0 -0.25A (+) OSCILLOSCOPE (NOTE 1) -1.0A 1cm 1.0 0.1 D.U.T. 10 100 REVERSE VOLTAGE,(V) E-mail: [email protected] NOTES : 1.Rise Time=7ns mas. Input Impedance= 1 magohm. 22pF 2.Rise time=10ns max. Source Impedance= 50 ohms Web Site: www.cnmic.com SET TIME BASE FOR 50/100ns/cm