FAST RECOVERY RECTIFIER SM4933 THRU SM4937 VOLTAGE RANGE 50 to 600 Volts CURRENT 1.0 Ampere FEATURES • • • • DO-213AB(MELF) Fast switching for high efficiency Low reverse leakage High forward surge current capability High temperature soldering guaranteed 260℃/10 second at terminals MECHANICAL DATA • • • • • • Case: Transfer molded plastic Epoxy: UL94V-0 rate flame retardant Lead: plated, solderable per MIL-STD-202E method 208C Polarity: Color band denotes cathode end Mounting position: Any Weight: 0.0046 ounce, 0.116gram Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • • • Ratings at 25℃ ambient temperature unless otherwise specified Single Phase, half wave, 60Hz, resistive or inductive load For capacitive load derate current by 20% SYMBOLS SM4933 SM4934 Maximum Repetitive Peak Reverse Voltage VRRM 50 100 Maximum RMS Voltage VRMS 35 70 Maximum DC Blocking Voltage VDC 50 100 Maximum Average Forward Rectified Current, 0.375″(9.5mm) lead length at TT =100℃ Peak Forward Surge Current 8.3ms single half sine wave superimposed on rated load (JEDEC method) SM4935 200 140 200 SM4936 400 280 400 SM4937 600 420 600 UNIT Volts Volts Volts I(AV) 1.0 Amps IFSM 30 Amps Maximum Instantaneous Forward Voltage at 1.0A VF IR Typical reverse recovery time (NOTE 1) Trr 1.3 5.0 100 200 Volts Maximum DC Reverse Current at rated TA = 25℃ DC Blocking Voltage per element TA = 125℃ Typical Junction Capacitance (Measured at 1.0MHz and applied reverse voltage of 4.0V) CJ 8.0 PF RθJT TJ TSTG 40 (-55 to +150) (-55 to +150) ℃/W Typical Thermal Resistance (NOTE 2) Operating Junction Temperature Range Storage Temperature Range Notes: 1. Reverse Recovery Test Conditions: IR=1.0A, VR=30V, di/di=50A/µS, IRR=10%IRM 2. Thermal resistance from Junction to ambient at 0.375″(9.5mm) lead length mounted on PCB E-mail: [email protected] Web Site: www.cnmic.com µA nS ℃ ℃ FAST RECOVERY RECTIFIER VOLTAGE RANGE 50 to 600 Volts CURRENT 1.0 Ampere FIG.1-TYPICAL FORWARD CURRENT FIG.2-MAXIMUM NON-REPETITIVE PEAK DERATING CURVE FORWARD SURGE CURRENT 1.0 (A) 0.8 0.6 Single Phase Half Wave 60Hz Resistive or Inductive Load 0.375″(9.5mm) Lead Length 0.4 0.2 30 CURRENT, (A) PEAK FORWARD SURGE 1.2 8.3ms Single Half Sine-Wave (JEDEC Method) T= Tjmax 20 10 1 Cycle 0 0 25 50 100 75 125 150 175 0 2 1 AMBIENT TEMPERATURE, (° C) 4 6 8 10 40 20 60 80 100 NUMBER OF CYCLES AT 60 Hz FIG.4-TYPICAL REVERSE CHARACTERISTICS FIG.3-TYPICAL INSTANTANEOUS 100 FORWARD CHARACTERISTICS PER LEG 1.0 0.1 TJ =25° C Pulse Width=300us 1% Duty Cycle 0.01 0.7 0.9 1.3 1.1 10 (μA) INSTANTANEOUS REVERSE CURRENT, 10 (A) INSTANTANEOUS FORWARD CURRENT, 20 1.0 0.1 1.4 INSTANTANEOUS FORWARD VOLTAGE,(V) 0.01 0 20 40 60 80 100 120 PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) FIG.5-TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE,(pF) AVERAGE FORWARD CURRENT, SM4933 THRU SM4937 FIG.6-TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC 100 10 T J =25℃ f=1MHz Vsig=50mVp-p 1 0.1 1.0 10 100 REVERSE VOLTAGE,(V) E-mail: [email protected] Web Site: www.cnmic.com 140