INTERCONNECTS .100” Grid (.030” dia.) Pins, Straight and Right Angle Double Row Series 802, 803 • Pin interconnects available with straight MM #7007 or right angle MM #5005/5107 solder tails. See page 182 for details. • Sockets are available with straight MM #1304 or right angle MM #1305/1306 solder tails. See pages 148 & 149 for details. • MM #1304, #1305 & #1306 receptacles use use Hi-Rel, 6-finger BeCu #47 contacts rated at 4.5 amps. Receptacles accept .030” diameter and .025” square pins. See page 221 for details. Fig. 1 RoHS 2002/95/EC • Insulators are high temp. thermoplastic. Ordering Information Series 802...10-001 Fig. 1 Straight Pin Header 802-XX-0_ _-10-001000 Specify # of pins Series 802...20-001 Fig. 2 02-64 Right Angle Pin Header 802-XX-0 _ _-20-001000 Fig. 2 Specify # of pins For Electrical, Mechanical & Enviromental Data, See pg. 4 02-64 For RoHS compliance select plating code. XX=Plating Code See Below SPECIFY PLATING CODE XX= 10 10μ” Au Pin Plating 90 40 200μ” Sn/Pb 200μ” Sn Series 803...10-001 Straight Socket 803-XX-_ _ _-10-001000 Fig. 3 Fig. 3 Specify # of pins Series 803...20-001 002-100 Right Angle Socket 803-XX-_ _ _-20-001000 Fig. 4 Specify # of pins For Electrical, Mechanical & Enviromental Data, See pg. 4 SPECIFY PLATING CODE XX= Fig. 4 w w w. m i l l - m a x . c o m For RoHS compliance select plating code. XX=Plating Code See Below 13 Sleeve (Pin) 10µ” Au Contact (Clip) 30µ” Au 82 002-100 91 93 41 99 43 44 200µ” Sn/Pb 200µ” Sn/Pb 200µ”Sn/Pb 200µ”Sn 200µ”Sn 200µ”Sn 10µ” Au 30µ” Au 200µ”Sn/Pb 10µ” Au 30µ” Au 200µ”Sn 516-922-6000