Series 896, 897 TYP. 0.50 4.40 8.90 7.7 PIN 1 0.80 TYP. 2.5 R0.4 PCB EDGE 2.0 9.2 5 (X2 ) MISCELLANEOUS CONNECTORS Mini Universal Serial Bus Surface Mount Sockets PIN 5 2.3 TYP. 1.0 5.25 2.50 9.0 1.1 2.95 6.90 0.80 TYP. PIN 5 RoHS 3.95 3.10 3.90 PIN 1 4.4 5.9 2002/95/EC 1.0 1.5 (X4) 5.5 0.50 TYP. R0.4 2.5 PIN 1 0.80 TYP. 4.40 8.90 7.7 PCB EDGE 2.0 9.2 5 (X2 ) Fig. 1 PIN 5 Features • Mini USB receptacles for surface mount. • 5 Pin (one ID Pin), 0.8mm pitch, mini USB connector. • Reduced mounting space. • Fully Shielded. • Fully compliant with current USB 2.0 specifications. • Smaller and lighter than existing USB connectors for portable and handheld devices. • Packaged on Tape & Reel - 700 parts per reel. Ordering Information: Figure 1: Mini Type A Recep., Single,Surface Mount 2.3 TYP. 896-43-005-00-100001 1.0 5.25 Figure 2: Mini Type B Recep., Single,Surface Mount 2.50 9.0 6.90 0.80 TYP. 3.10 3.90 PIN 1 5.9 4.4 Fig. 2 Applications: • • • • • • Cell phones Digital still cameras Digital video cameras PDAs MP3 Players Other portable and hand-held devices w w w. m i l l - m a x . c o m 897-43-005-00-100001 PIN 5 Specifications 3.95 2.95 1.0 1.1 1.5 (X4) 5.5 Materials: Terminals: Copper Alloy, Tin Plated Contacts: Copper Alloy, 0,76μm Gold Plated Casing & Shield: Stainless Steel Insulator material: High temp. thermoplastic rated UL94V-0 Ratings: Voltage: 30VAC (rms) Current: 1A max. per contact for 30°C temperature rise All housing materials rated for “lead-free” soldering up to 260ºC Electrical: Contact resistance: 50mΩ max. Insulation resistance: 100MΩ min. Dielectric withstanding voltage: 100VAC at sea level Capacitance: 2pF max. Mechanical: Random vibration: No discontinuity >1μs per EIA 364-28, cond. V, letter A Physical shock: No discontinuity >1μs per EIA 364-27, condition H Durability: 5000 cycles min. per EIA 364-09 Mating force: 35 Newtons max. per EIA 364-13 Unmating force: Initial - 7 Newtons min. per EIA 364-13 After test - 3 Newtons min. per EIA 364-13 Cable Pull-out force per EIA 364-38 Environmental: Thermal shock per EIA 364-32, condition I Humidity per EIA 364-31, method III, condition A Temperature life per EIA 364-17, condition 3, method A Solderability per EIA 364-52, category 2 121 516-922-6000