BL GALAXY ELECTRICAL TRANSIENT VOLTAGE SUPPRESSOR SMBJ5.0 - - - SMBJ188CA BREAKDOWN VOLTAGE: 5.0 --- 188 V PEAK PULSE POWER: 600 W FEATURES Underwriters Laboratory Recognition under UL standard for safety 497B: Isolated Loop Circuit Protection Low profile package with built-in strain relief for surface mounted applications Glass passivated junction Low incremental surge resistance, excellent clamping capability 600W peak pulse power capability with a 10/1000µs waveform, repetition rate (duty cycle): 0.01% Very fast response time High temperature soldering guaranteed: 250°C/10 seconds at terminals DO-214AA(SMB) MECHANICAL DATA Case:JEDEC DO-214AA molded plastic over passivated junction Terminals: Solder plated, solderable per MIL-STD-750, method 2026 Polarity: Foruni-directional types the color band denotes the cathode, which is postitive with respect to the anode under normal TVS operation Weight: 0.003 ounces, 0.093 grams Flammability: Epoxy is rated UL 94V-0 inch(mm) Devices for Bidirectional Applications For bi-directional devices, use suffix C or CA (e.g. SMBJ10C, SMBJ10CA). Electrical characteristics apply in both directions. MAXIMUM RATINGS AND CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. SYMBOL VALUE UNIT Peak pow er dissipation w ith a 10/1000μs w aveform (NOTE 1,2, FIG.1) PPPM Minimum 600 W Peak pulse current w ith a 10/1000μs w aveform (NOTE 1) IPPM See Table Below A Peak forw ard surge current, 8.3ms single half sine-w ave ffff uni-directional only( (NOTE 2) IFSM 100.0 A Typical thermal resistance, junction to ambient( (NOTE 3) RθJA 100.0 /W Typical thermal resistance, junction to lead RθJL 20 /W TJ, TSTG -55---+150 Operating junction and storage temperature range NOTES: (1) Non-repetitive current pules, per Fig. 3 and derated above TA=25 per Fig. 2. (2) Mounted on 0.2 x 0.2" (5.0 x 5.0mm) copper pads to each terminal. (3) Mounted on minimum recommended pad layout. Document Number 0285006, BLGALAXY ELECTRICAL www.galaxycn.com 1. ELECTRICAL CHARACTERISTICS Device Type Modified "J" Bend Lead Device Marking Code Ratings at 25 Breakdow n Voltage V (BR) at IT(1) (V ) ambient tem perature unless otherwise specif ied.V F =3.5V at I F =50A (uni-directional only ) Test Current IT(m A) Stand-off V oltage V W M (V ) Maximum Maximum Maximum Clamping Reverse Leakage Peak Pulss Surge Current IPPM V oltage at IPPM at V W M ID( A ) (3) (A ) (2) V c (V ) Uni Bi Min Max +SMBJ5.0 KD KD 6.40 7.82 10 5.0 800 62.5 9.6 +SMBJ5.0A KE KE 6.40 7.07 10 5.0 800 65.2 9.2 +SMBJ6.0 KF KF 6.67 8.15 10 6.0 800 52.6 11.4 +SMBJ6.0A KG KG 6.67 7.37 10 6.0 800 58.3 10.3 +SMBJ6.5 KH AH 7.22 8.82 10 6.5 500 48.8 12.3 +SMBJ6.5A KK AK 7.22 7.98 10 6.5 500 53.6 11.2 +SMBJ7.0 KL KL 7.78 9.51 10 7.0 200 45.1 13.3 +SMBJ7.0A KM KM 7.78 8.60 10 7.0 200 50.0 12.0 +SMBJ7.5 KN AN 8.33 10.2 1.0 7.5 100 42.0 14.3 +SMBJ7.5A KP AP 8.33 9.21 1.0 7.5 100 46.5 12.9 +SMBJ8.0 KQ AQ 8.89 10.9 1.0 8.0 50 40.0 15.0 +SMBJ8.0A KR AR 8.89 9.83 1.0 8.0 50 44.1 13.6 +SMBJ8.5 KS AS 9.44 11.5 1.0 8.5 20 37.7 15.9 +SMBJ8.5A KT AT 9.44 10.4 1.0 8.5 20 41.7 14.4 +SMBJ9.0 KU AU 10.0 12.2 1.0 9.0 10 35.5 16.9 +SMBJ9.0A KV AV 10.0 11.1 1.0 9.0 10 39.0 15.4 +SMBJ10 KW AW 11.1 13.6 1.0 10 5.0 31.9 18.8 +SMBJ10A KX AX 11.1 12.3 1.0 10 5.0 35.3 17.0 +SMBJ11 KY KY 12.2 14.9 1.0 11 5.0 29.9 20.1 +SMBJ11A KZ KZ 12.2 13.5 1.0 11 5.0 33.0 18.2 +SMBJ12 LD BD 13.3 16.3 1.0 12 5.0 27.3 22.0 +SMBJ12A LE BE 13.3 14.7 1.0 12 5.0 30.2 19.9 +SMBJ13 LF LF 14.4 17.6 1.0 13 5.0 25.2 23.8 +SMBJ13A LG LG 14.4 15.9 1.0 13 5.0 27.9 21.5 +SMBJ14 LH BH 15.6 19.1 1.0 14 5.0 23.3 25.8 +SMBJ14A LK BK 15.6 17.2 1.0 14 5.0 25.9 23.2 +SMBJ15 LL BL 16.7 20.4 1.0 15 5.0 22.3 26.9 +SMBJ15A LM BM 16.7 18.5 1.0 15 5.0 24.6 24.4 +SMBJ16 LN LN 17.8 21.8 1.0 16 5.0 20.8 28.8 +SMBJ16A LP LM 17.8 19.7 1.0 16 5.0 23.1 26.0 +SMBJ17 LQ LQ 18.9 23.1 1.0 17 5.0 19.7 30.5 +SMBJ17A LR LR 18.9 20.9 1.0 17 5.0 21.7 27.6 +SMBJ18 LS BS 20.0 24.4 1.0 18 5.0 18.6 32.2 +SMBJ18A LT BT 20.0 22.1 1.0 18 5.0 20.5 29.2 +SMBJ20 LU LU 22.2 27.1 1.0 20 5.0 16.8 35.8 +SMBJ20A LV LV 22.2 24.5 1.0 20 5.0 18.5 32.4 +SMBJ22 LW BW 24.4 29.8 1.0 22 5.0 15.2 39.4 +SMBJ22A LX BX 24.4 26.9 1.0 22 5.0 16.9 35.5 +SMBJ24 LY BY 26.7 32.6 1.0 24 5.0 14.0 43.0 +SMBJ24A LZ BZ 26.7 29.5 1.0 24 5.0 15.4 38.9 +SMBJ26 MD CD 28.9 35.3 1.0 26 5.0 12.9 46.6 +SMBJ26A ME CE 28.9 31.9 1.0 26 5.0 14.3 42.1 +SMBJ28 MF MF 31.1 38.0 1.0 28 5.0 12.0 50.0 +SMBJ28A MG MG 31.1 34.4 1.0 28 5.0 13.2 45.4 +SMBJ30 MH CH 33.3 40.7 1.0 30 5.0 11.2 53.5 36.8 1.0 30 5.0 12.4 +SMBJ30A MK CK 33.3 48.4 Notes: (1) Pulse test :tP 50ms www.galaxycn.com (2) Surge current w aveform per Fig.3 and derate per Fig.2 (3) For bi-directional types having V W M of 10 Volts and less,the ID Iimit is doubled (4) All terms and symbols are consistent w ith ANSI/IEEE C62.35 +Underw riters Laboratory Recognition for the classification of protectors (QV G2) under the UL standard for saf ety 497B and f ile number E239431 for both uni-directional and bi-directional devices Document Number 0285006 BLGALAXY ELECTRICAL 2. ELECTRICAL CHARACTERISTICS Device Type Modified "J" Bend Lead Device Marking Code Uni Bi Ratings at 25 ambient temperature unless otherwise specif ied.VF =3.5V at I F=50A (uni-directional only ) Breakdow n Voltage V (BR) at IT(1) (V) Min Max Test Current IT(m A) Stand-off Voltage V WM (V) Maximum Maximum Reverse Leakage Peak Pulss Surge at V WM Current IPPM ID( A)(3) (A)(2) Maximum Clamping Voltage at IPPM Vc (V) 5.0 44.9 1.0 33 10.2 +SMBJ33 ML CL 36.7 59.0 40.6 33 5.0 1.0 11.3 +SMBJ33A MM CM 36.7 53.3 5.0 36 48.9 1.0 9.3 +SMBJ36 MN CN 40.0 64.3 5.0 36 44.2 1.0 10.3 +SMBJ36A MP CP 40.0 58.1 5.0 40 54.3 1.0 8.4 +SMBJ40 MQ CQ 44.4 71.4 5.0 49.1 1.0 40 9.3 +SMBJ40A MR CR 44.4 64.5 58.4 1.0 43 5.0 7.8 +SMBJ43 MS CS 47.8 76.7 5.0 52.8 1.0 43 8.6 +SMBJ43A MT CT 47.8 69.4 5.0 61.1 1.0 45 7.5 +SMBJ45 MU MU 50.0 80.3 1.0 45 55.3 8.3 5.0 +SMBJ45A MV MV 50.0 72.7 48 65.1 5.0 7.0 1.0 +SMBJ48 MW MW 53.3 85.5 58.9 1.0 48 5.0 7.8 +SMBJ48A MX MX 53.3 77.4 1.0 5.0 51 69.3 6.6 +SMBJ51 MY MY 56.7 91.1 62.7 51 5.0 7.3 1.0 +SMBJ51A MZ MZ 56.7 82.4 73.3 54 5.0 6.2 1.0 +SMBJ54 ND ND 60.0 96.3 66.3 1.0 6.9 5.0 54 +SMBJ54A NE NE 60.0 87.1 5.8 78.7 1.0 5.0 58 +SMBJ58 NF NF 64.4 103 58 5.0 6.4 71.2 1.0 +SMBJ58A NG NG 64.4 93.6 5.6 81.5 1.0 60 5.0 +SMBJ60 NH NH 66.7 107 73.7 1.0 60 5.0 6.2 +SMBJ60A NK NK 66.7 96.8 5.3 64 5.0 86.9 1.0 +SMBJ64 NL NL 71.1 114 5.8 5.0 78.6 1.0 64 +SMBJ64A NM NM 71.1 103 1.0 70 5.0 95.1 4.8 +SMBJ70 NN NN 77.8 125 86.0 1.0 5.0 5.3 70 +SMBJ70A NP NP 77.8 113 102 1.0 75 5.0 4.5 +SMBJ75 NQ NQ 83.3 134 92.1 5.0 1.0 75 5.0 +SMBJ75A NR NR 83.3 121 1.0 78 5.0 106 4.3 +SMBJ78 NS NS 86.7 139 95.8 1.0 78 5.0 4.8 +SMBJ78A NT NT 86.7 126 85 115 1.0 5.0 4.0 +SMBJ85 NU NU 94.4 151 104 1.0 85 5.0 4.4 +SMBJ85A NV NV 94.4 137 122 1.0 90 5.0 3.8 +SMBJ90 NW NW 100 160 111 1.0 4.1 90 5.0 +SMBJ90A NX NX 100 146 136 1.0 100 5.0 3.4 +SMBJ100 NY NY 111 179 123 1.0 100 5.0 3.7 +SMBJ100A NZ NZ 111 162 149 1.0 110 5.0 3.1 +SMBJ110 PD PD 122 196 135 1.0 110 5.0 3.4 +SMBJ110A PE PE 122 177 163 1.0 120 5.0 2.8 +SMBJ120 PF PF 133 214 147 1.0 120 5.0 3.1 +SMBJ120A PG PG 133 193 176 1.0 130 5.0 2.6 +SMBJ130 PH PH 144 231 159 1.0 130 5.0 2.9 +SMBJ130A PK PK 144 209 204 1.0 150 5.0 2.2 +SMBJ150 PL PL 167 268 185 1.0 150 5.0 2.5 +SMBJ150A PM PM 167 243 218 1.0 160 5.0 2.1 +SMBJ160 PN PN 178 287 197 1.0 160 5.0 2.3 +SMBJ160A PP PP 178 259 231 1.0 170 5.0 2.0 +SMBJ170 PQ PQ 189 304 209 1.0 170 5.0 2.2 +SMBJ170A PR PR 189 275 255 1.0 188 5.0 1.7 +SMBJ188 PT PT 209 344 231 1.0 188 5.0 2.0 +SMBJ188A PS PS 209 328 Notes: (1) Pulse test :tP 50ms www.galaxycn.com (2) Surge current w aveform per Fig.3 and derate per Fig.2 (3) For bi-directional types having V WM of 10 Volts and less,the ID Iimit is doubled (4) All terms and symbols are consistent w ith ANSI/IEEE C62.35 (5) For the bidirectional SMBG/SMBJ5.0CA, the maximum V (BR) is 7.25V +Underw riters Laboratory Recognition for the classification of protectors (QVG2) under the UL standard for safety 497B and file number E239431 for both uni-directional and bi-directional devices Document Number 0285006 BLGALAXY ELECTRICAL 3. RATINGS AND CHARACTERISTIC CURVES SMBJ5.0 - - -SMBJ188CA TA=25 10 0.2 x 0.2" (0.5 x 0.5mm) Copper Pad Areas 0.1 0.1μs 1.0μs 10μs 100μs 1ms 10ms DERATING IN PERCENTAGE, % NON-REPETITIVE PULSE WAVEFORM SHOWN IN FIG.3 100 75 50 25 0 (I PPM) PPPM, PEAK PULSE POWER, KW 100 1.0 FIG.2 -- PULSE DERATING CURVE PEAK PULSE POWER P(PP)OR CURRENT FIG.1 -- PEAK PULSE POWER RATING CURVE td, PULSE WIDTH, SEC. CJ, JUNCTION CAPACITANCE, pF IPPM , PEAK PULSE CURRENT, % PULES WIDTH (td) is DEFINDE as the POINT WHERE the PEAK CURRENT DECAYS to 50% of I PPM PEAK VALUE I PPM 100 HALF VALUE - I PPM 2 10/1000¦ Μsec. WAVEFORM as DEFINED by R.E.A. 50 td 0 0 1.0 2.0 3.0 150 175 200 100 VR, Measured at Stand-Off Voltage, VWM TJ=25 f=1.0MHZ Vsig=50mVp-p 10 100 200 V(BR), BREAKDOWN VOLTAGE, V FIG.6 -- MAXIMUM NON-REPETITIVE PEAK FORWARD HHHH HSURGE CURRENT /W ) 100 10 1 10 100 1000 IFSM, PEAK FORWARD SURGE CURRENT, A 1000 ( TRANSLENT THERMAL IMPEDANCE 125 Measured at Zero Bias 4.0 FIG.5 -- TYPICAL TRANSIENT THERMAL IMPEDANCE 0.1 100 1,000 t, TIME, ms 0.01 75 6,000 10 1.0 1 0.001 50 FIG.4 -- TYPICAL JUNCTION CAPACITANCE H HHHHHHH UNIDIRECTIONAL 150 sec 25 TA, AMBIENT TEMPERATURE. FIG.3 -- PULSE WAVEFORM tr=10 0 200 TJ=TJ max. 8.3ms SINGLE HALF SINE-MAVE (JEDEC METHOD) 100 50 10 1 tp — PULSE DURATION, SEC 10 100 NUMBER OF CYCLES AT 60 Hz www.galaxycn.com Document Number 0285006 BLGALAXY ELECTRICAL 4.