1801 Morgan Street Rockford, Illinois 61102 800-435-2931 www.molexkits.com Datasheet for 76650-0172 General Information Part Number: 76650-0172 Manufacturer: Molex / Waldom Title: EXTreme Z Power Connector Kit Description: Mezzanine PCB Connectors Product Family: EXTreme ZPower™ Certificates: (Molex Parts within this kit) - EU RoHS Compliant and UL Country of Origin: Kit assembled in U.S.A. Specifications Design Configuration: (Wire-to-Board) and/or (Board-to-Board) PCB Layout Pitch: 3.18 mm (0.125") Connector Type: Interconnect System PCB thickness Parallel Board Spacing: 1.57mm (.062") min. - (Wire-to-Board) Current Rating: 30 (6 Tail) and 50 (10 Tail) Amps - Current rating is application dependent. Voltage: 600 volts Wire size: 8 and (12-10) AWG 10.30mm (.405") - (Board-to-Board) Product Highlights The Z-Power connectors are power mezzanine connectors with 50 Amp (10 Tail) and 30 Amp (6 Tail) versions. These connectors are single-piece devices which connect two printed circuit boards. The connectors are press-fit to a lower board and subsequently bolted to a second, upper board. For additional Molex / Waldom Design and Solution Kits please go to www.molexkits.com Page 1 of 2 1801 Morgan Street Rockford, Illinois 61102 800-435-2931 www.molexkits.com Datasheet for 76650-0172 Features and Benefits • Patented internal terminal design allows a rigid, secure interface while helping to isolate pressfit pins from the load of shock and vibration • Captured internal nut for ease of assembly • High-normal force, high-reliability interface • One piece ridged Board-To-Board high current interconnect • Hertzian contact areas create a reliable (gas-tight) mating surface • Screw contact interface can accept standard wire-crimp, ring-lug terminals for wire-to-board applications Applications • Industrial Applications • 30 Amp applications • 50 Amp applications Bill of Materials for Part No. 76650-0172 Country Molex Part No. of Origin Description Quantity in Kit 19073-0216 USA # 5-6 Ring Tongue Terminal Nylon (12-10) AWG 10 19193-0128 USA 10 76001-0106 USA 76001-0110 USA # 5-6 Ring Tongue Terminal Non-insulated (12-10) AWG 6 Tail, 30Amp, Tin plated, EXTreme ZPower™ PCB Connector 10 Tail, 50Amp, Tin plated, EXTreme ZPower™ PCB Connector 19193-0198 USA # 6 Ring Tongue Terminal Non-insulated 8 AWG 10 2 2 Recommended Molex Tool(s) for Part No. 76650-0172* Country Molex Part No. of Origin Description 62100-5300 * USA ZPower™ Extraction Tool 64001-0100 * USA Hand Crimp Tool (RHT-1990) 64001-1500 * USA Hand Crimp Tool (RHT-2200) 64003-0100 * USA Hand Crimp Tool (RHT-1992) 64001-3900 * USA Hand Crimp Tool (MCT-8200) - 8 AWG *Tool(s) not included in kit. Tool(s) ordered separately. For additional Molex / Waldom Design and Solution Kits please go to www.molexkits.com Page 2 of 2