mV-LEVEL SIGNAL AMPLIFIER DESCRIPTION PRODUCT PROGRAM mV-level amplifier can receive the mV-voltage Part Number Power Supply Input Output signal input from the scene, and transmit a standard output signal to the control room or DCS TM663D/S 24V 100mV Isolation Power Output Channels None 1 0-5V through isolation. With characteristics of high TMS63D/S-24 24V 24mV 0-5V None 1 output TM6S3AD-3 24V ±100mV 0-3V None 1 accuracy, good linearity and low temperature drift, it needs an independent power supply, and three port Isolation among input, output and power supply. Note: We could also offer customer design for special input and output. ELECTRICAL CHARACTERISTICS FEATURES ● Three port Isolation(input, output, power supply) Power Supply Data ● High accuracy (0.1% F.S.) ● High linearity (0.1% F.S.) ● Isolation voltage(3000VDC/60S) ● High frequency response Power Supply (Nominal Power Supply)±5% Power Dissipation ≤2W Power Protection Reverse protection Input Impedance ≥10 MΩ Overload ≤15V Input Data ● Low temperature drift(35PPM/℃) ● Industry class(Operation temp.: -25℃ to 71℃) ＞1KΩ（Vout=max） Output Data ● High reliability(MTBF＞500,000 hours) Load ≤500Ω（Iout=max） TRANSMISSION CHARACTERISTICS Offset MODEL SELECTION TMXXXD Package style Power supply Signal output Signal input m V Signal input Isolation am plifier 0.1%F.S. Gain Error 0.1%F.S. Temperature Drift 0.0035%F.S./℃(-25℃ to +71℃) ISOLATION CHARACTERISTICS Galvanic Isolation Three port Isolation(input, output, power supply) Isolation Voltage 3KVDC(Tested for 1minute and 1mA max, humidity < 70%) Insulation Resistance 100MΩ ， 500VDC (Among signal input ,signal output and power supply) OTHER CHARACTERISTICS Ambient temperature Operation temperature:-25℃ to +71℃ Package DIP24/SOIC24 Weight About 10g Application environment No dusts, gases of fiercely vibration, impulsion or gases that may erode to the components surrounded Transport and Storage temperature:-50℃ to +105℃ MORNSUN Science & Technology co.,Ltd. Address: 2th floor 6th building, Huangzhou Industrial District, Guangzhou, China Tel: 86-20-38601850 Fax:86-20-38601272 Http://www.mornsun-power.com Note: 1 .All specifications measured at TA=25°C, humidity<75%, nominal input voltage and rated output load unless otherwise specified. 2 .See application circuits for more details. MORNSUN reserves the copyright Specifications subject to change without notice. TMXXXD/S A/0-2008 Page 1 of 2 SCHEMATIC DIAGRAM APPLICATION NOTE 1. Please read instruction book carefully before 24Power supply 23+ using the product. If you have any question, please contact with our technical support. 2. Please don’t install in the dangerous zone. 3. The power supply is direct voltage. 220V alternating current is forbidden. 12- Vout+ VinInput 11+ 4. Don’t divide the product privately in case the 3+ Output 1Vout- Vin+ equipments ineffective or go wrong. AFTER SERVICE 1. Products are carefully inspected and controlled APPLICATION CIRCUIT DIAGRAM before going out from our factory. If they operated abnormally or there were anything wrong in the inner parts, please contact with our P o w e r su p p ly agents near you or technical support in our NC NC NC NC Pin- 16 15 14 13 Pin+ NC NC NC company as soon as possible. 24 23 22 21 20 2. 3 years warranty since the delivery date. During the period of Sgnd Iout+ Vout+ NC NC NC NC Sin+ Sin- TMxxxD 1 2 3 4 5 9 10 11 12 quality guarantee，our company will repair or change free of charge if product has any quality problem in the process of normally using. APPLICATION CIRCUITS In p u t O u tp u t See A GUIDE TO INSTRUMENTATION ISOLATION AMPLIFIERS for more detail. PACKAGING SIZE AND TERMINAL DESCRIPTION F irst Angle Projection SOIC Package 0.70 (0.028) 4.00 (0.157) 32.30(1.272) 27.94(1.100) 0.65 (0.026) 10. 20 (0.397) 10.20 (0.397) DIP Package 14.40 (0.560) 14.40 (0.560) 17. 78(0. 700) 32.30(1.272) 0.70 RECOMMENDED FOOTPRINT (0. 028) Top v iew, gr id: 2. 54m m( 0. 1inc h) di ameter :1 .0 0mm (0. 039 inc h) 0.30 1.15± 0.15 (0.012) 0.045±0.006 24 23 2221 20 1615 14 13 9 1011 VinVin+ NC NC NC NC NC NC NC NC NC Sin+ Sin- NC NC NC NC NC NC Sin+ Sin- 1 2 3 4 5 1 2 3 4 5 12 161514 13 Sgnd Iout+ Vout+ NC NC VinVin+ NC NC NC Sgnd Iout+ Vout+ NC NC 19.24 (0.757) 24 23 22 21 20 2.00 0.079 9 1011 12 1.00 0.039 FOOTPRINT DETAILS Pin 1(Sgnd) Function Pin Function Output - 23(Vin+) Power supply+ Power supply- 2(Iout+) Output current- 24(Vin-) 3(Vout+) Output voltage+ Others 11(Sin+) Input+ NC Input12(Sin-) NC:No connection Note: Unit:mm(inch) Pin section:0.50*0.30mm(0.020*0.012inch) Pin tolerances: ±0.10mm(± 0.004inch) General tolerances: ±0.25mm( ±0.010inch) MORNSUN reserves the copyright Specifications subject to change without notice. TMXXXD/S A/0-2008 Page 2 of 2