MOSPEC FR101 THRU FR107 FAST RECOVERY RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 1 Ampere FEATURES ＊Low cost construction ＊Low reverse leakage ＊Fast switching for high efficiency ＊High forward surge current Capability ＊High Temperature soldering guaranteed: 260oC/10 seconds, 0.375”(9.5 mm) lead length at lbs (2.3kg) tension. DO-41 DIM MECHANICAL DATA ＊Case：Transfer Molded Plastic ＊Epoxy: UL94V-O rate flame retardant ＊Terminals：Plated axial lead, Solderable Per MIL-STD-202 Method 208 ＊Polarity：Color band denotes cathode end ＊Mounting position: Any ＊Weight：0.012 ounce, 0.33 grams (approx) MILLIMETERS MIN MAX A 2.00 2.70 B 25.40 --- C 4.20 5.20 D 0.70 0.90 AXIMUM RATINGS AND ELECTRICAL CHARATERISTICS * Rating at 25℃ ambient temperature unless otherwise specified * Single phase,half wave. 60Hz, resistive or inductive load. * For capacitive load derate current by 20 % Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectifier Forward Current Per Leg TC=75℃ Symbol FR101 FR102 FR103 FR104 FR105 FR106 FR107 Unit VRRM VRWM VR 50 100 200 400 600 800 1000 V VR(RMS) 35 70 140 280 420 560 700 V IF(AV) 1.0 A IFSM 30 A VF 1.3 V Maximum Instantaneous Reverse Current ( Rated DC Voltage, TC = 25℃) ( Rated DC Voltage, TC = 100℃) IR 5.0 100 uA Reverse Recovery Time (Note 3) Trr Typical Junction Capacitance (Note 1) Cj Non-Repetitive Peak Surge Current (Surge applied at rate load conditions halfware, single phase, 60Hz) Maximum Instantaneous Forward Voltage ( IF =1.0 Amp TC = 25℃) Typical Thermal Resistance(Note 2) 150 250 500 ns 15 pF o RθJA 50 Operating Temperature Range TJ -65 to +150 ℃ Storage Temperature Range Tstg -65 to +150 ℃ NOTES: 1. Measured at 1.0MHz and applied reverse voltage of 4.0 volts 2. Thermal Resistance from Junction to Ambient temperature at .375”(9.5mm) lead length, P.C. board mounted. 3.Test conditions: IF = 0.5 A, IR =1.0 , IRR=0.25 A C/W FR101 Thru FR107 FIG-3 FORWARD CURRENT DERATING CURVE O TJ=25 C Pulse Width=300 us 1% Duty Cycle AVERAGE FORWARD RECTIFIED CURRENT (Amp.) AVERAGE FORWARD RECTIFIED CURRENT (Amp.) FIG-1 TYPICAL FORWARD CHARACTERISITICS Single Phase Half Wave 60 Hz Resistive or Inductive Load 0.375 “(9.5mm) Lead Length LEAD TEMPERATURE (℃) FIG-4TYPICAL JUNCTION CAPACITANCE FORWARD VOLTAGE (Volts) O JUNCTION CAPACITANCE (PF) O TJ=50 C O TJ=25 C REVERSE VOLTAGE (Volts.) FIG-5PEAK FORWARD SURGE CURRENT PERCENT OF PEAK REVERSE VOLTAGE (﹪) PEAK FORWARD SURGE CURRENT (Amp.) INSTANTANEOUS REVERSE CURRENT (uA.) FIG-2 TYPICAL REVERSE CHARACTERISTICS TJ=25 C F=1 MHz 8.3ms Single Half Sine-Wave (JEDEC Method) NUMBER OF CYCLES AT 60 Hz Set time base for 50/100 ns/cm FIG-6 Reverse Recovery Time Characteristic and Test Circuit Diagram