MRV EM316-2SFP

Optical Transport
Solutions
Datasheet
FD
SFP-to-SFP Media Module
Features and Benefits
SFP-to-SFP interface connectivity
Data rate independence
Transparent protocol determined by SFPs
Flexibility and scalability
- Add/Change optics
- Adjust data rates as needed
- Maintain single item inventory
Complete range of optical and copper plug-in interfaces
available from MRV Communications
2R data signal conditioning
SFP Digital Diagnostics (SFF-8472)
Overview
SNMP management
Combining data rate independent connectivity with support for SFP
transceivers, the Fiber Driver® SFP-to-SFP media module (EM316-2SFP)
from MRV Communications defines a new generation of deployment
flexibility and inventory management. It is now simple to deploy an
extremely wide range of optical infrastructure solutions including
media conversion, signal boosting, lambda conversion, Wave Division
Multiplexing (WDM), and Optical Add/Drop Multiplexing (OADM).
Full graphical management support in MegaVision Pro®
Applications
Media conversion
Signal boosting
Lambda conversion
The SFP-to-SFP media module offers plug-n-play ease of installation.
Simply install the module into the Fiber Driver chassis, insert the SFP
transceivers required for the protocol and distance of the application,
and connect to the network. Changing the connection type later requires
changing only the transceivers. With SFP and module hot-swapping,
there is virtually no down time involved.
CWDM
DWDM
OADM
Typical Application: Multi-mode to Single-mode Conversion
3-
K
M
--
--
3WITCH2OUTER
%-3&0WITH-ANAGEMENT
-ODULEINA3LOT#HASSIS
3WITCH2OUTER
[email protected]
Optical Transport
Solutions
Because SFP transceivers are portable, they may be shared
easily between different locations and applications.
Modular design maximizes equipment investment
and reduces the need for on-hand inventory. MRV
Communications provides a complete range of optical
and copper plug-in interfaces for the EM316-2SFP to
satisfy your network growth and changing needs.
The SFP-to-SFP media module is data rate independent
and performs 2R (reshape and retransmit) conditioning
of the data signal. Any protocol is supported, including
Fast and Gigabit Ethernet, FDDI, ESCON, SONET (OC-3, OC12, OC-48 and above), Fibre Channel (1 Gbps & 2 Gbps),
DVB, Serial Digital Video Interface (SDI) SMPTPE-259M
(270Mbps), High Definition Serial Interface (HD-SDI/HDTV)
SMTPE-292M (1.5 Gbps), and many others. The SFP pair
selected determines the protocol.
The SFP-to-SFP media module fully supports the SFP
standard including Digital Diagnostics as defined by SFF8472. Together with a Fiber Deriver network management
module, it provides real-time access to information such as
transceiver type (protocol, range, vendor, etc.), transceiver
temperature, TX/RX optical power, and transceiver
supply voltage. It also provides a means for generating
management alerts and warnings when system parameters
fall outside of the normal operating range.
With an external Mux/DeMux unit such as the 4-channel
or 8-channel Fiber Driver CWDM Passive Mux/DeMux
(EM316PA4N / EM316PA8N), the SFP-to-SFP media module
becomes a WDM building block for any protocol and data
rate of the SFPs. MRV also offers Dense Wave Division
Multiplexing (DWDM) options.
Deployed along a WDM trunk at customer service points
with MRV Communications passive OADM technology, the
SFP-to-SFP media module becomes a sophisticated Add/
Drop topology component.
The SFP-to-SFP media module is a hot-swappable, single-slot
device that fits in any powered Fiber Driver chassis. Through
a Fiber Driver network management module, the EM3162SFP is SNMP manageable and fully supported through
the GUI of MegaVision Pro®, the comprehensive network
management system (NMS) from MRV Communications.
Contact your MRV Communications representative
for additional information on the full line of MRV
Communications products, pricing, and availability.
Physical Specifications
Operating Temperature Range*
00C to 500C (320F to 1580F)
Storage Temperature
-400C to 700C (-400F to 1580F)
Relative Humidity
85% maximum, non-condensing
Physical Dimensions
25 mm x 75 mm x 175 mm deep (1” x 3” x 7” deep)
Weight
Approximately 213 g (7.5 oz)
Regulatory Compliance
FCC Part 15 (Class A); IC (Class A); EMC Directive: Emission (Class A) and Immunity;
RoHS Directive; China RoHS; WEEE Directive
Ordering Info
* Operating Range listed is for the module only. Operating Range of pluggable interface(s) used may differ.
Model
Description
Protocol
Connectors Wavelength
EM316-2SFP
Protocol independent
media module with
SFP Interfaces
Data rate independent, SFP (x2)
protocol transparent
N/A
(SFP dependent)
Budget (dB)
Range
N/A
(SFP dependent)
N/A
(SFP dependent)
MRV has more than 50 offices throughout the world. Addresses, phone numbers, and fax numbers are listed at www.mrv.com.
Please e-mail us at [email protected] or call us for assistance.
MRV (East Coast USA)
295 Foster St.
Littleton, MA 01460
800-338-5316
978-952-4700
MRV (West Coast USA)
20415 Nordhoff St.
Chatsworth, CA 91311
800-338-5316
818-773-0900
MRV (International)
Business Park Moerfelden
Waldeckerstrasse 13
64546 Moerfelden-Walldorf
Germany
Tel. (49) 6105/2070
Fax. (49) 6105/207-100
All statements, technical information and recommendations related to the products herein are based upon information believed to be reliable or accurate. However, the accuracy or completeness
thereof is not guaranteed, and no responsibility is assumed for any inaccuracies. Please contact MRV Communications for more information. MRV Communications and the MRV Communications
logo are trademarks of MRV Communications, Inc. Other trademarks are the property of their respective holders.
MRV-FD-2SFP-041907
1398021-001 Rev. A1
Copyright ©2007 MRV Communications, Inc. All Rights Reserved.