Datasheet Datasheet 155 Mbps SFP Transceiver SFP-O3D-XLR Features Designed for SFF-8472 and SFF-8074i compliance (SFP) 100 - 155 Mbps data rates - SONET OC-3/STM-1 - Fast Ethernet Class 1 laser (Tx): 1550 nm 170 km distance Digital Diagnostics (SFF-8724) Commercial temperature rating General Operations Parameter Supply Voltage Total Current Symbol Min. Max. Unit Vcc 3.135 3.465 V Icc - 300 mA Power Supply Noise Rejectiona PSR 100 - mVp-p Operating Temperature of SFP Caseb Top -5 70 ºC Storage Temperature Tst -40 85 ºC Data Rate OC-3/STM-1 DR 100 155 Mbps a) 20 Hz to 155 MHz b) Maximum Relative Humidity is 85%, non-condensing Transmitter Specifications (Optical) Parameter Symbol Min Max Unit Optical Power Pop 1 5 dBm Average Launch Power (Tx: Off ) Poff - -45 dBm Extinction Ratio ER 10 - dB Eye Mask Optical Jitter Generation SONET/SDH Compliant Jgen - 0.002 UI Optical Rise Timec tr - 1000 ps Optical Fall Timec tf - 1000 ps Mean Tx Wavelength: 1550 λ 1500 1580 nm Spectral Width (20 dB) Δλ - 1 nm Side Mode Suppression Ratio SMSR 30 - dB Dispersion Penalty (150 km) DP - 2 dB Relative Intensity Noise RIN - -120 dB/Hz Reflection Tolerance rp -24 - dB c) 20% - 80% values 1 Datasheet Transmitter Specifications (Electical) Parameter Input Differential Impedence Symbol Min Max Unit Rin 80 120 Ω PECL Single-Ended Data Input Swing Vin,p-p 250 1200 mV TxFault_Fault Vfault 2 Vcc V Vnormal Vee Vee + 0.5 V TxDisable_Disable TxFault_Normal Vd 2 Vcc V TxDisable_Enable Ven Vee Vee + 0.8 V Symbol Min Max Unit Rsens,low/high -42 (sensitivity) -8 (saturation) dBm Pin,damage 4 - dBm λ 1480 1580 nm LOS Assert LOSA -52 - dBm LOS De-assert LOSD - -42 dBm LOS Hysteresis HYS 0.5 - dB Parameter Symbol Min Max Unit PECL Single Ended Data Output Swing Vout, p-p 185 800 mV Data Output Rise Time tr - 2 ns Data Output Fall Time tf - 2 ns Receiver Specifications (Optical) Parameter Receive Powerd Damage Threshold for Receiver Mean Rx Wavelength: 1550e d) at 10-10 BER, PRBS 223-1 e) Operational over 1200 nm to 1625 nm range Receiver Specifications (Electrical) Timing and Electrical Parameter Symbol Min Max Unit Tx Disable Negate Time t_on - 5 ms Tx Disable Assert Time t_off - 10 μs Time To Initialize, Including Reset of Tx Fault t_init - 300 ms Tx Fault Assert Time t_fault - 100 μs μs Tx Disable To Reset t_reset 10 - LOS Assert Time t_loss_on - 100 μs LOS De-assert Time t_loss_off - 100 μs Serial ID Clock Rate KHz f_serial_clock - 100 RX_LOS Voltage (High) - 2 - V RX_LOS Voltage (Low) - - 0.8 V LOS Output Voltage-Fault LOS Output Voltage-Normal VLOS fault 2 Vcc V VLOSnormal Vee Vee + 0.5 V MOD_DEF (0:2)-High Vh 2 Vcc V MOD_DEF (0:2)-Low Vl Vee Vee + 0.5 V 2 Datasheet Digital Diagnostics Parameter Range Accuracy Unit Calibration Temperature -5 to 70 ±3 ºC Internal Tc(C)=Tad(16 bit signed twos complement)/256 Voltage 0 to Vcc 0.1 V Internal V(Volts)=Vad(16 bit unsigned integer)*0.1 Bias Current 0 to 120 5 mA External I(mA)=Islope*Iad(16 bit unsigned integer)+Ioffset TX Power 1 to 5 ±3 dBm External TX_PWR(μW)=TX_PWRslope*TX_PWRad(16 bit unsigned integer +TX_PWRoffset RX Power -42 to -10 ±5 dBm External RX_PWR(μW)=A0+A1*x+A2*x^2+A3*x^3+A4*x^4 Pin Function Notes 1 VeeT TX GND Formula 2 TX_FAULT Open Collector 3 TX_DISABLE Internally Pulled High 4 MOD_DEF2 Serial Data Input 5 MOD_DEF1 Serial Clock Input 6 MOD_DEF0 Internally Grounded 7 NC Not Connected 8 LOS Open Collector 9 VeeR RX Ground 10 VeeR RX Ground 11 VeeR RX Ground 12 RXD- RX Data Negative 13 RXD+ RX Data Positive 14 VeeR RX GND 15 VccR RX Power 16 VccT TX Power 17 VeeT TX GND 18 TXD+ TX Data Positive 19 TXD- TX Data Negative 20 VeeT TX GND Model Description Data Rate (Mbps) Wavelength (nm) Connector Bail Latch Color Distance Range (km) Ordering Information SFP-O3D-XLR SFP FE/OC3 Transceiver 100 - 155 1550 Dual LC White 60 - 170 3 Datasheet Outline Drawing - Units in mm(inch) Regulatory Compliances RoHS directive; China RoHS; California RoHS Law, USA and Canada UL listing; 21CFR 1040.10 and 1040.11; SFP MSA SFF-8074i; SFF-8472; Telecordia GR-468; GR-253/STM G.957 compliance Warnings Handling Precautions: This device is susceptible to damage as a result of electrostatic descharge (ESD). A static free environment is highly recommended. Follow guidelines according to proper ESD procedures. Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to direct or indeirect radiation. MRV has more than 50 offices throughout the world. Addresses, phone numbers and fax numbers are listed at www.mrv.com. Please e-mail us at [email protected] or call us for assistance. MRV Los Angeles 20415 Nordhoff St. Chatsworth, CA 91311 800-338-5316 818-773-0900 MRV Boston 295 Foster St. Littleton, MA 01460 800-338-5316 978-952-4700 MRV International Business Park Moerfelden Waldeckerstrasse 13 64546 Moerfelden-Walldorf Germany Tel. (49) 6105/2070 Fax (49) 6105/207-100 All statements, technical information and recommendations related to the products herein are based upon information believed to be reliable or accurate. However, the accuracy or completeness thereof is not guaranteed, and no responsibility is assumed for any inaccuracies. Please contact MRV Communications for more information. MRV Communications and the MRV Communications logo are trademarks of MRV Communications, Inc. Other trademarks are the property of their respective holders. MRV-OP-SFPO3DXLR-011309 3020038-001 Rev. A2 Copyright ©2009 MRV Communications, Inc. All Rights Reserved.