IHB100SC 100 Watt Single Output Half Brick DC/DC Converter OBSOLETE PRODUCT Contact factory for replacement model RoHS Compliant 33-75V Input Range 1500VDC Isolation Between Input and Output High Efficiency: 86% Typical Operation to 100oC Baseplate Temperature 50MS Transient Recovery, 0-90% Load Step Primary & Secondary Remote On/Off External Synchronization IHB100SCC Series Are Approved to UL/CUL 1950, EN 60950 The IHB100SC series standard half brick modules are designed for today’s demanding industrial applications. Available in two wide range inputs, these isolated converters offer many features in the standard models. ISO9001 CERTIFIED With a complement of safety agency approvals and low noise operations, the converters respond extremely fast to change in load conditions. Inherent in the design are very well-controlled output voltage and no need for minimum loading. PRODUCT SELECTION CHART MODEL IHB100S4803C IHB100S4805C INPUT VOLTAGE (VDC) 48 (33-75) 48 (33-75) ABSOLUTE MAXIMUM RATINGS RATED VOUT (VDC) RATED MAXIMUM I OUT (A) 3.3 30 5.1 20 EFFICIENCY vs TEMPERATURE TCASE = +40°C, nominal input voltage, nominal load, recommended external components applied, unless otherwise specified.* Baseplate Temperature +100°C Storage Temperature +125°C Input to Output Isolation 1500 VDC Change in Efficiency (%) Output Short-Circuit Duration Continuous Case Temperature (°C) SPECIFICATIONS, ALL MODELS Specifications are at TCASE = +40°C nominal input voltage unless otherwise specified. INPUT PARAMETER Voltage Range Reflected Ripple Current Input Ripple Rejection Maximum Input Current No Load Power Dissipation Inrush Charge Quiescent Operating Current Primary On/Off Disabled Secondary On/Off Disabled GENERAL PARAMETER ISOLATION Input to Output Input to Baseplate Resistance, Input - Output Capacitance, Input - Output Leakage Current GENERAL Set Point Accuracy Turn-on Time Remote On/Off Control Inputs Primary Sink Current-Logic Low Vlow Vhigh Secondary Sink Current-Logic Low Vlow Vhigh External Synchronization Input Frequency Pulse Width Source Impedence Input High Voltage Input Low Voltage Input Impedance Switching Frequency Weight TEMPERATURE Operation/Specification Storage Shutdown Thermal Inpedance CONDITIONS Peak - Peak DC to 1KHz Output Power = 100W VIN = 30V POUT = 0, VIN, Min<VIN<VIN, Max MIN TYP MAX UNITS 33 48 75 370 50 60 VDC mA dB 5 6 0.247 A W mC 7.5 15 10 20 mA mA TYP MAX UNITS CONDITIONS MIN Peak Test 1500 1500 10 VISO = 240VAC, 60Hz 2000 180 VIN = Nominal, IO=INOM Within 1% of Nominal VOUT 3.5 Open Collector/Drain VIN = VMAX VDC VDC M7 pF MA, rms 1 5 % mSec 7 0.8 Open Collector mA V 100 0.4 Open Collector MA V 520 320 47 5 1 KHz nSec 7 V V 7 KHz oz (g) Open Collector/Drain 440 150 4 0 470 470 480 490 3 (85) Case Temperature -40 -55 +100 Case to Ambient +100 +125 +115 8.2 oC °C °C °C/W * See Application Notes available on the web at www.murata-ps.com IHB100SC REV A (RoHS) 05/2006 2 IHB100S4803C OUTPUT PARAMETER Output Power Set Point Voltage Output Current, IOUT Output Ripple, p-p Output Adjust Range Output Temperature Drift Line Regulation IO = IO, Nom Load Regulation Current Limit Inception Short-Circuit Current Transient Response Peak Deviation Settling Time Overvoltage Limit Efficiency IHB100S4805C OUTPUT PARAMETER Output Power Set Point Voltage Output Current, IOUT Output Ripple, p-p Output Adjust Range Output Temperature Drift Line Regulation IO = IO, Nom Load Regulation Current Limit Inception Short-Circuit Current Transient Response Peak Deviation Settling Time Overvoltage Limit Efficiency VOUT CONDITIONS Min 100 Watts Max IO Nom 0 DC to 20MHz* Nom 50 3.3 15 100 3.15 * .02 Max 100 30.0 200 3.80 .05 UNITS W V A mV V %/°C VIN, Min≤VIN≤VIN, Max 0.05 Min Load to Rated Load 0.10 0.50 38 30 1.00 38 % % A A 50 to 100% Load Step 150 35 VOUT, 1% of VOUT, Nom 4.2 83 VIN=NOM, IO=30A 250 50 5.0 mV MSec V % Max 100 UNITS W V A mV V %/°C 84 VOUT CONDITIONS Min 100 Watts Maximum IO Nom 0 DC to 20MHz* * Nom 50 5.1 10 100 4.60 .02 20 150 5.50 .05 VIN, Min≤VIN≤VIN, Max 0.05 Min Load to Rated Load 0.10 0.5 26.0 20.0 % 1.0 26.0 % A A 50 to 100% Load Step 200 35 VOUT, 1% of VOUT, Nom 6.0 86 VIN=NOM, IO=20A 87 300 50 7.0 mV MSec V % *See Application Notes available on the web at www.murata-ps.com THROUGH-HOLE SOLDERING INFORMATION These devices are intended for wave soldering or manual soldering. They are not intended to be subject to surface mount processes under any circumstances. The normal wave soldering process can be used with these devices where the device is subjected to a maximum wave temperature of 260°C for a period of no more than 10 seconds. Within this time and temperature range, the integrity of the device’s plastic body will not be compromised and internal temperatures within the converter will not exceed 175°C. Care should be taken to control manual soldering limits identical to that of wave soldering. IHB100SC REV A (RoHS) 05/2006 3 MECHANICAL SIDE VIEW PIN SIDE DOWN PIN CONNECTIONS PIN SIDE UP 1 2 PRIMARY ON/OFF -VIN 3 4 5 6 7 8 +VIN SYNC IN TRIM +VOUT -VOUT SECONDARY ON/OFF NOTES: All dimensions are in inches (millimeters). PIN PLACEMENT TOLERANCE: ± 0.005" MECHANICAL TOLERANCE: ± 0.015" Marked with: specific model ordered, date code, job code. MATERIAL: Units are encapsulated in a low thermal resistance molding compound which has excellent chemical resistance and electrical properties in high humidity environments and over a wide operating temperature range. The encapsulant and outer shell of the unit have UL94V-0 ratings. Lead material is solder plated to allow ease of solderability. Murata Power Solutions, Inc. 11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A. Tel: (508) 339-3000 (800) 233-2765 Fax: (508) 339-6356 USA: Mansfield (MA), Tel: (508) 339 3000, email: [email protected] Canada: Toronto, Tel: (866) 740 1232, email: [email protected] UK: Milton Keynes, Tel: +44 (0)1908 615232, email: [email protected] France: Montigny Le Bretonneux, Tel: +33 (0)1 34 60 01 01, email: [email protected] Germany: München, Tel: +49 (0)89-544334-0, email: [email protected] Japan: Tokyo, Tel: 3-3779-1031, email: [email protected] Osaka, Tel: 6-6354-2025, email: [email protected] China: Shanghai, Tel: +86 215 027 3678, email: [email protected] Guangzhou, Tel: +86 208 221 8066, email: [email protected] www.murata-ps.com email: [email protected] ISO 9001 & ISO 14001 REGISTERED Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without notice. © 2009 Murata Power Solutions, Inc. IHB100SC Singapore: Parkway Centre, Tel: +65 6348 9096, email: [email protected] REV A (RoHS) 05/2006 4