OBSOLETE PRODUCT Contact factory for replacement model WPC03R 3 WATT REGULATED WIDE INPUT RANGE DC/DC CONVERTER ISO9001 CERTIFIED DESCRIPTION The WPC03R is a family of high performance DC/DC converters that offers regulated outputs over input voltage ranges of 9-18V, 18-36V and 34-72V while offering a wide operating temperature range of -40°C to +85°C without derating. Each WPC03R contains input filtering to minimize conducted noise. The design utilizes surface mounted components, including magnetics, to provide enhanced reliability. FEATURES Low Cost, High Performance Small DIP Package Full Power to +85°C Extended Temperature Range: -40°C to +85°C Industry Standard Pinouts Full Short Circuit Protection High Capacitive Loading Capability Protected Against High Input Voltage APPLICATIONS The converter is designed to meet the requirements of EN60950 with the “L” pinout having 1,500 VDC isolation. All WPC03R converters are designed to withstand input voltage transients to 200% of nominal input voltage. An additional feature is the ability of the WPC03R to drive high capacitive loads. SIMPLIFIED CIRCUIT SCHEMATIC Telecommunications Battery Powered Systems Portable Instruments Transportation Equipment Distributed Power Systems Internet: http://www.murata-ps.com Page 1 WPC03R 01/2009 ABSOLUTE MAXIMUM RATINGS Output Short Circuit Protection --------------Continuous Internal Power Dissipation ----------------------------1.5W Max Case Temperature-----------------------------+100°C ELECTRICAL SPECIFICATIONS Specifications typical at TA=25°C, nominal input voltage, rated output current unless otherwise stated. Model Nominal Rated Input Output Voltage Voltage (Volts) (Volts) Output Current (mA) Min Load Rated Load Max Input Current (mA) Rated Load Max Capacitive Load (MF) Efficiency % (See Note 1) WPC03R12S05 12 5.0 60 600 448 600 77 WPC03R12S12 12 12.0 24 250 445 250 80 WPC03R12S15 12 15.0 20 200 445 200 81 WPC03R12D05 12 +5.0 +30 +300 470 +300 74 WPC03R12D12 12 +12.0 +12 +125 475 +125 76 WPC03R12D15 12 +15.0 +10 +100 475 +100 77 WPC03R24S05 24 5.0 60 600 230 600 74 WPC03R24S12 24 12.0 24 250 230 250 75 WPC03R24S15 24 15.0 20 200 225 200 76 WPC03R24D05 24 +5.0 +30 +300 240 +300 73 WPC03R24D12 24 +12.0 +12 +125 235 +125 74 WPC03R24D15 24 +15.0 +10 +100 230 +100 75 WPC03R48S05 48 5.0 60 600 120 600 74 WPC03R48S12 48 12.0 24 250 118 250 75 WPC03R48S15 48 15.0 20 200 116 200 76 WPC03R48D05 48 +5.0 +30 +300 120 +300 73 WPC03R48D12 48 +12.0 +12 +125 118 +125 76 WPC03R48D15 48 +15.0 +10 +100 116 +100 77 NOTE 1: Although minimum load specifications are indicated for load measurement purposes, all models will operate under no-load conditions. ORDERING INFORMATION WPC03R Device Family Indicates wide input power 3W regulated DC/DC Model Number Selected from Table of Electrical Characteristics xx=input voltage y=number of outputs: S=single, D=dual zz=output voltage Pinout option E or L Page 2 xxyzz - WPC03R 01/2009 COMMON SPECIFICATIONS Specifications typical at TA=25°C, nominal input voltage, rated output current unless otherwise stated. Parameter Input Voltage Range Reflected Ripple Current Isolation Safety Standards Conditions Min 9 18 34 Typ Max 12 24 48 50 Units 18 36 72 Vdc Vdc Vdc mA p-p Designed to meet requirements of EN60950, EN41003 & UL1950 Rated Voltage Test Voltage—60 Hz, 10 secs Resistance Capacitance Leakage Current “L” Pinout “E” Pinout “L” Pinout “E” Pinout 1500 1000 1500 1000 Viso=240Vac, 60 Hz Output Rated Power Voltage Setpoint Accuracy Temperature Coefficient Line Regulation-singles Low line to high line Line Regulation-duals Low line to high line Load Regulation-singles Min load to rated load Load Regulation-duals Min load to rated load Ripple & Noise BW=5 Hz to 20 MHz General Switching Frequency Variable Frequency Min - Max MTTF per MIL-HDBK-217, Rev F TA=25° Weight Temperature Operation Storage 10 220 Vdc Vdc Vpk Vpk G7 pF 30 MArms 3 +3.0 +1.5% +1.5% +2% +2% 100 W % %/°C % % % % mV p-p 225 kHz +0.02 50 70 1,000,000 12 -40 -55 Hours g +85 +125 °C °C THROUGH-HOLE SOLDERING INFORMATION These devices are intended for wave soldering or manual soldering. They are not intended to be subject to surface mount processes under any circumstances. The normal wave soldering process can be used with these devices where the device is subjected to a maximum wave temperature of 260°C for a period of no more than 10 seconds. Within this time and temperature range, the integrity of the device’s plastic body will not be compromised and internal temperatures within the converter will not exceed 175°C. Care should be taken to control manual soldering limits identical to that of wave soldering. Page 3 WPC03R 01/2009 MECHANICAL SPECIFICATIONS PINOUT “E” Pin Number 1 2 3 10 11 12 13 14 15 22 23 24 Pin Function Singles Duals +Vin +Vin No connection -Vout No connection Common -Vout Common +Vout +Vout -Vin -Vin -Vin -Vin +Vout +Vout -Vout Common No connection Common No connection -Vout +Vin +Vin PINOUT “L” Pin Number Pin Function Singles Duals 2 -Vin -Vin 3 -Vin -Vin 9 No connection Common 11 No connection -Vout 14 +Vout +Vout 16 -Vout Common 22 +Vin +Vin 23 +Vin +Vin TECHNICAL INFORMATION Notes: 1. All dimensions in inches and (millimeters). 2. Units are encapsulated in a low thermal resistance molding compound which has excellent chemical resistance, wide operating temperature range, and good electrical properties under high humidity environments. The encapsulant and outer shell of the unit have UL94V-0 ratings. Lead material is matte tin 100 microinches min., over nickel, 40-80 microinches. 3. GRID: 0.100 inches, (2.54 mm). 4. Pin Placement Tolerance: +0.015", (+.381 mm). Murata Power Solutions, Inc. 11 Cabot Boulevard, Mansfield, MA 02048-1151 U.S.A. Tel: (508) 339-3000 (800) 233-2765 Fax: (508) 339-6356 USA: Mansfield (MA), Tel: (508) 339 3000, email: [email protected] Canada: Toronto, Tel: (866) 740 1232, email: [email protected] UK: Milton Keynes, Tel: +44 (0)1908 615232, email: [email protected] France: Montigny Le Bretonneux, Tel: +33 (0)1 34 60 01 01, email: [email protected] Germany: München, Tel: +49 (0)89-544334-0, email: [email protected] Japan: Tokyo, Tel: 3-3779-1031, email: [email protected] Osaka, Tel: 6-6354-2025, email: [email protected] China: Shanghai, Tel: +86 215 027 3678, email: [email protected] Guangzhou, Tel: +86 208 221 8066, email: [email protected] www.murata-ps.com email: [email protected] ISO 9001 & ISO 14001 REGISTERED Murata Power Solutions, Inc. makes no representation that the use of its products in the circuits described herein, or the use of other technical information contained herein, will not infringe upon existing or future patent rights. The descriptions contained herein do not imply the granting of licenses to make, use, or sell equipment constructed in accordance therewith. Specifications are subject to change without notice. © 2009 Murata Power Solutions, Inc. Page 4 Singapore: Parkway Centre, Tel: +65 6348 9096, email: [email protected] WPC03R 01/2009