6, 8 PIN DIP 250 V BREAK DOWN VOLTAGE PS7122A-1B, -2B NORMALLY CLOSED TYPE PS7122AL-1B, -2B 1-CH, 2-CH OPTICAL COUPLED MOSFET FEATURES DESCRIPTION • 1 CHANNEL TYPE: 1b Output PS7122A-1B, -2B and PS7122AL-1B, -2B are solid state relays containing a GaAs LED on the light emitting side (input side) and normally close (N.C.) contact MOSFETs on the output side. • 2 CHANNEL TYPE: 1b + 1b Output • DESIGNED FOR AC/DC SWITCHING LINE CHANGER • SMALL AND THIN PACKAGE: 6, 8 PIN DIP They are suitable for analog signal control because of their low offset and high linearity. APPLICATIONS • LOW LED OPERATING CURRENT: IF = 2 mA • EXCHANGE EQUIPMENT • LOW OFFSET VOLTAGE • MEASUREMENT EQUIPMENT • SURFACE MOUNT AVAILABLE • FA/OA EQUIPMENT ELECTRICAL CHARACTERISTICS (TA = 25°C) PART NUMBER Coupled MOSFET Diode SYMBOLS PS7122A-1B, -2B, PS7122AL-1B, -2B PARAMETERS UNITS MIN TYP MAX 1.2 1.4 VF Forward Voltage, IF = 10 mA V IR Reverse Current, VR = 5 V µA ILoff Off-State Leakage Current, IF = 10 mA, VD = 250 V µA 0.03 COUT Output Capacitance, IF = 10 mA,, V = 0 V, f = 1 MHz pF/ch 340 Ron1 Ron2 On-State Resistance, Ω 4.5 8.0 IF = 0 mA, IL = 10 mA IF = 0 mA, IL = 200 mA, t≤10 ms 5.0 1.0 ton Turn-On Time1 IF = 10 mA, VL = 5 V, RL = 500 Ω, ms 0.04 0.2 toff Turn-Off Time1 PW ≥ 10 ms ms 0.5 1.5 Rl-O Isolation Resistance, Vin-out = 1.0 kVDC Cl-O Isolation Capacitance, V = 0 V, f = 1 MHz 109 Ω pF/ch 1.1 Note: 1. Turn-On, Turn-Off Time. PS7122A-1B PS7122AL-1B IF Pulse Input VL Input 50% PS7122A-2B PS7122AL-2B 6 5 4 8 7 6 5 1 2 3 1 2 3 4 0 Input Monitor VO Monitor Rin RL VO = 5 V 90% Output 10% toff ton California Eastern Laboratories PS7122A-1B, -2B, PS7122AL-1B, -2B ABSOLUTE MAXIMUM RATINGS1 (TA = 25°C) SYMBOLS Diode VR IF PD IF (Peak) MOSFET VL IL ILP PD Notes: RATINGS 1. Operation in excess of any one of these parameters may result PS7122A-1B PS7122A-2B in permanent damage. PS7122AL-1B PS7122AL-2B 2. PW = 100 µs, Duty Cycle = 1 % 3. Conditions: IF≥2 mA. The following types of load connections are available: V 5 mA 50 6 1 mW/ch 50 Connection A 2 VL (AC/DC) 5 IL A 1 3 L 4 PARAMETERS UNITS Reverse Voltage Forward Current (DC) Power Dissipation Peak Forward Current2 Break Down Voltage Continuous Load Current3 Connection A Connection B Connection C V 250 mA 200 Connection B 350 500 — — Pulse Load Current4 AC/DC Connection Connection C Power Dissipation mW/ch 560 375 BV Isolation Voltage5 Vr.m.s. 1500 1500 PT Total Power Dissipation 1 2 3 1 2 3 1 2 3 6 5 IL + _ VL (DC) L 4 6 5 4 IL 6 5 IL _ + VL (DC) L + _ VL (DC) L IL + IL 4 IL Coupled TSTG TA mW 610 850 Storage Temperature °C -40 to +100 -40 to +100 Operating Ambient Temp. °C -40 to +80 -40 to +80 4. PW = 100 ms, 1 shot. 5. AC voltage for 1 minute at TA = 25 °C, RH = 60 % between input and output. ORDERING INFORMATION PART NUMBER RECOMMENDED OPERATING CONDITIONS (TA = 25 °C) SYMBOL PARAMETER IF LED Operating Current VF LED Off Voltage PS7122A-1B 2 V 0 PACKING STYLE 6-pin DIP Magazine case 50 pcs PS7122AL-1B UNITS MIN TYP MAX mA PACKAGE 10 PS7122AL-1B-E3 20 PS7122AL-1B-E4 0.5 PS7122A-2B Embossed tape 1000 pcs/reel 8-pin DIP Magazine case 50 pcs PS7122AL-2B PS7122AL-2B-E3 OUTLINE DIMENSIONS (Units in mm) PS7122AL-2B-E4 Embossed tape 1000 pcs/reel PS7122A-1B, -2B, PS7122AL-1B, -2B OUTLINE DIMENSIONS (Units in mm) PS7122AL-1B PS7122A-1B (TOP VIEW) (TOP VIEW) 9.25±0.5 6 5 9.25±0.5 4 6 5 4 1. LED Anode 2. LED Cathode 3. NC 2 1 2 1 4. MOSFET Drain 3 5. MOSFET Source 1. LED Anode 3 2. LED Cathode 6. MOSFET Drain 6.5±0.5 3. NC 0.10 3.5±0.3 4. MOSFET Drain 5. MOSFET Source 3.5±0.3 4.15±0.3 7.62 6.5±0.5 1.34±0.1 6. MOSFET Drain 0.9±0.25 2.54 0.25 M +0.10 -0.05 9.60±0.4 3.3±0.3 2.54 1.34 ± 0.1 0.25 M 0 to 15 ˚ 0.50 ± 0.1 PS7522AL-2B PS7122A-2B (TOP VIEW) 9.25±0.5 (TOP VIEW) 9.25±0.5 8 7 6 5 1 2 3 4 8 7 6 5 1 2 3 4 6.5±0.5 +0.10 0.10 -0.05 3.5±0.3 3.5±0.3 4.15±0.3 7.62 6.5±0.5 1.34±0.1 0.9±0.25 9.60±0.4 2.54 3.3±0.3 1.34 ± 0.10 2.54 0.25 M 0.50 ± 0.10 0 to 15 ˚ 1. LED Anode 5. MOSFET 2. LED Cathode 6. MOSFET 3. LED Anode 7. MOSFET 4. LED Cathode 8. MOSFET 1. LED Anode 5. MOSFET 2. LED Cathode 6. MOSFET 3. LED Anode 7. MOSFET 4. LED Cathode 8. MOSFET TYPICAL PERFORMANCE CURVES (TA = 25 °C) MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE MAXIMUM LOAD CURRENT vs. AMBIENT TEMPERATURE 300 Maximum Load Current, IL (mA) Maximum Forward Current, IF (mA) 100 80 60 40 20 0 -25 0 25 50 75 80 Ambient Temperature, TA (°C) 100 250 200 150 100 50 0 -25 0 25 50 75 80 Ambient Temperature, TA (°C) 100 PS7122A-1B, -2B, PS7122AL-1B, -2B TYPICAL PERFORMANCE CURVES (TA = 25 °C) OUTPUT CAPACITANCE vs. SUPPLY VOLTAGE FORWARD VOLTAGE vs. AMBIENT TEMPERATURE 400 1.6 1.4 IF = 50 mA 30 mA 20 mA 10 mA 1.2 5 mA 1.0 1 mA 0.8 -25 0 25 50 75 Output Capacitance, COUT (pF) Forward Voltage, VF (V) f = 1 MHz 200 100 0 100 20 40 60 80 100 120 Ambient Temperature, TA (°C) Supply Voltage, VCC (V) NORMALIZED ON-STATE RESISTANCE vs. AMBIENT TEMPERATURE ON-STATE RESISTANCE DISTRIBUTION 3.0 30 Normalized to 1.0 at TA = 25 °C IF = 0 mA IL = 10 mA 2.5 n = 50 pcs IF = 0 mA IL = 10 mA 25 2.0 Number (pcs) Normalized On-State Resistance, Ron 300 1.5 1.0 0.5 20 15 10 5 0.0 -25 0 25 50 75 0 100 4.3 4.4 4.5 4.6 4.7 Ambient Temperature, TA (°C) On-State Resistance, Ron (Ω) OFF-STATE LEAKAGE CURRENT vs. SUPPLY VOLTAGE LOAD CURRENT vs. LOAD VOLTAGE IF = 10 mA 200 TA = 80°C 10-6 Load Current, IL (mA) Off-State Leakage Current, ILoff (A) 10-5 10-7 25°C 10 -8 100 -2.0 -1.0 0 1.0 -100 -200 10-9 0 50 100 150 200 Supply Voltage, VCC (V) 250 Load Voltage, VL (V) 2.0 PS7122A-1B, -2B, PS7122AL-1B, -2B TYPICAL PERFORMANCE CURVES (TA = 25 °C) TURN-ON TIME vs. FORWARD CURRENT TURN-ON TIME DISTRIBUTION 30 0.6 n = 50 pcs IF = 10 mA VL = 5 V RL = 500 Ω 0.5 25 0.4 20 Number (pcs) Turn-On Time, tON (ms) VL = 5V, RL = 500 kΩ 0.3 0.2 15 10 0.1 0 5 5 10 15 20 25 0 0.03 30 0.05 0.06 Forward Current, IF (mA) Turn-On Time, tON (ms) TURN-OFF TIME DISTRIBUTION OFF-STATE LEAKAGE CURRENT vs. SUPPLY VOLTAGE 10-7 n = 50 pcs IF = 10 mA VL = 5 V RL = 500 Ω 25 20 15 10 5 Off-State Leakage Current, ILOFF (A) 30 Number (pcs) 0.04 0 0.3 0.4 IF = 10 mA TA = 80°C 10 -8 10-9 25°C 10 -10 10 -11 0 0.5 50 100 150 200 Turn-Off Time, tOFF (ms) Supply Voltage, VCC (V) LOAD CURRENT vs. LOAD VOLTAGE TURN-OFF TIME vs. FORWARD CURRENT 250 12 VL = 5 V, RL = 500 Ω 10 100 -2.0 -1.0 0 1.0 -100 2.0 Turn-Off Time, tOFF (ms) Load Current, IC (mA) 200 8 6 4 2 -200 0 Load Voltage, VL (V) 5 10 15 20 25 Forward Current, IF (mA) 30 PS7122A-1B, -2B, PS7122AL-1B, -2B TYPICAL PERFORMANCE CURVES (TA = 25 °C) NORMALIZED TURN-OFF TIME vs. AMBIENT TEMPERATURE NORMALIZED TURN-ON TIME vs. AMBIENT TEMPERATURE Normalized to 1.0 at TA = 25 °C IF = 10 mA VL = 5 V RL = 500 Ω 2.5 3.0 Normalized Turn-Off Time, TOFF Normalized Turn-On Time, TON 3.0 2.0 1.5 1.0 0.5 0.0 -25 0 25 50 75 100 Normalized to 1.0 at TA = 25 °C IF = 10 mA VL = 5 V RL = 500 Ω 2.5 2.0 1.5 1.0 0.5 0.0 -25 0 25 50 Ambient Temperature, TA75 (°C) 100 Ambient Temperature, TA (°C) TAPING SPECIFICATIONS (Units in mm) 2.0 ± 0.1 1.55 ± 0.1 4.0 ± 0.1 OUTLINE AND DIMENSIONS (REEL) 1.75 ± 0.1 OUTLINE AND DIMENSIONS (TAPE) 4.3 ± 0.2 1.5 φ330 10.3 ± 0.1 R 1.0 0.3 1.55 ± 0.1 φ80.0 ± 5.0 φ13.0 ± 0.5 16.0 ± 0.3 7.5 ± 0.1 2.0 ± 0.5 φ21.0 ± 0.8 10.4 ± 0.1 12.0 ± 0.1 +2.0 16.4- 0.0 Notes: 1. Packing : 1000 pcs/reel TAPING DIRECTION PS7122AL-1B-E3 PS7122AL-2B-E3 PS7122AL-1B-E4 PS7122AL-2B-E4 PS7122A-1B, -2B, PS7122AL-1B, -2B RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering • Peak reflow temperature • Time of temperature higher than 210 °C • Number of reflows • Flux 235 °C or below (package surface temperature) 30 seconds or less Two Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) Package Surface Temperature T (˚C) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s 235 ˚C (peak temperature) 210 ˚C to 30 s 100 to 160 ˚C 60 to 120 s (preheating) Time (s) (2) Dip soldering • Temperature • Time • Number of times • Flux 260 °C or below (molten solder temperature) 10 seconds or less One Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.) (3) Cautions • Fluxes Avoid removing the residual flux with freon-based cleaning solvent. EXCLUSIVE NORTH AMERICAN AGENT FOR RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS CALIFORNIA EASTERN LABORATORIES • Headquarters • 4590 Patrick Henry Drive • Santa Clara, CA 95054-1817 • (408) 988-3500 • Telex 34-6393 • FAX (408) 988-0279 24-Hour Fax-On-Demand: 800-390-3232 (U.S. and Canada only) • Internet: http://WWW.CEL.COM 07/17/2001 DATA SUBJECT TO CHANGE WITHOUT NOTICE