NEC's 4-PIN ULTRA SMALL FLAT-LEAD, LOW OUTPUT CAPACITANCE PS7802-1A 1-CH OPTICAL COUPLED MOSFET FEATURES DESCRIPTION • LOW C x R : C x R = 12.6 pF • Ω NEC's PS7802-1A is a low output capacitance solid state relay containing GaAs LEDs on the light emitting side (input side) and MOSFETs on the output side. • 1 CHANNEL TYPE: 1a output An ultra small ßat-lead package has been provided which realizes a reduction in mounting area about 50% compared with the PS72xx series. • LOW ON-STATE RESISTANCE: Ron = 1.1 Ω TYP • HIGH PASS CHARACTERISTICS: ERT = 45 ps TYP • DESIGNED FOR AC/DC SWITCHING LINE CHANGER • ULTRA SMALL FLAT-LEAD PACKAGE: 4.2 (L) X 2.5 (W) X 1.85 (H) mm It is suitable for high frequency signal control, due to its low C x R, low on-state resistance, and low off-state leakage current. APPLICATIONS • LOW OFFSET VOLTAGE • ORDERING NUMBER OF TAPING PRODUCT: PS7801-1A-F3, F4 (3 500 pcs/reel) • MEASUREMENT EQUIPMENT ELECTRICAL CHARACTERISTICS (TA = 25 °C) PART NUMBER SYMBOLS Diode MOS FET PS7802-1A PARAMETERS VF Forward Voltage, IF = 5 mA IR Reverse Current, VR = 5 V MIN TYP MAX UNITS 1.1 1.4 V 5.0 μA 1 nA ILOFF Off-State Leakage Current, VD = 40 V 0.1 Cout Output Capacitance, VD = 0 V, f = 1 MHz 11.5 RON On-State Resistance, IF = 5 mA, IL = 250 mA 1.1 1.6 Ω tON Turn-on Time, IF = 5 mA, VO = 5 V, RL = 500 Ω, PW ≥ 10 ms 0.1 0.5 ms tOFF Turn-off Time, IF = 5 mA, VO = 5 V, RL = 500 Ω, PW ≥ 10 ms 0.08 0.50 ms pF 109 RI-O Isolation Resistance, VI-O = 0.5 k VDC CI-O Isolation Capacitance, V = 0 V, f = 1 MHz 0.3 pF ERT Equivalent Rise Time, IF = 10 mA, tr (in) = 25.0 ps, V = 250 mV, 50 Ω termination 45 ps Ω 1. Test Circuit for Switching Time IF VL Pulse Input Input 50% 0 Vo monitor Input monitor VO = 5 V 90% Output Rin RL 10% ton toff 2. The turn-on time and turn-off time are speciÞed as input-pulse width ≥ 10 ms. Please note that when the device operates with an input-pulse of under 10 ms, the turn-on time and turn-off time will increase California Eastern Laboratories PS7802-1A ABSOLUTE MAXIMUM RATINGS1 (TA = 25°C) UNITS (Units in mm) 0.8 0.6 Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. PW = 100 μs, Duty Cycle = 1 % 3. PW = 100 ms, 1 shot 4. AC voltage for 1 minute at TA = 25ºC, RH = 60% between input and output 24-R0.1 ORDERING INFORMATION PART NUMBER PS7802-1A-F3 PACKAGE PACKING STYLE 4-PIN SSOP Embossed Tape 3 500 pcs PS7802-1A-F4 RECOMMENDED OPERATING CONDITIONS (TA = 25°C) SYMBOL PARAMETER UNITS MIN TYP IF VF LED Operating Current IF 2 5 LED Off Voltage VF 0 MAX 20 0.5 OUTLINE DIMENSIONS (Units in mm) 2.5±0.3 TOP VIEW 0.2 MAX. 4 3 0.2 ±0.1 1. LED Anode 2. LED Cathode 3. MOS FET 4. MOS FET 3.6 N 1 1 2 0.15 0.36 +0.1 -0.05 1.85±0.05 4.8 MAX 0.4±0.1 0.2±0.1 1.27 3 +0.3 -0.4 4.2 ±0.2 4 2 5.3 mA V mW A V mA mA mW Vrms mW °C °C 4.4 RATINGS (0.35) VR PD IFP VL IL ILP PD Viso PT TA TSTG PARAMETERS Forward Current (DC) 50 Reverse Voltage 5.0 Power Dissipation 50 Peak Forward Current2 1 Break Down Voltage 40 Continuous Load Current 250 Pulse Load Current3 500 Power Dissipation 100 Isolation Voltage4 500 Total Power Dissipation 150 Operating Ambient Temp. -40 to +85 Storage Temperature -40 to +100 3.6 MOS FET Diode SYMBOLS IF RECOMMENDED MOUNT PAD DIMENSIONS PS7802-1A TYPICAL CHARACTERISTICS (TA = 25ºC) MAXIMUM LOAD CURRENT vs. AMBIENT TEMPERATURE MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE 300 Maximum Load Current, IL (mA) Maximum Forward Current, IF (mA) 100 80 60 40 20 0 -25 0 25 50 75 85 250 200 150 100 50 0 -25 100 0 25 75 85 50 100 Ambient Temperature, TA (ºC) Ambient Temperature, TA (ºC) OUTPUT CAPACITANCE vs. APPLIED VOLTAGE FORWARD VOLTAGE vs. AMBIENT TEMPERATURE 25 1.6 Output Capacitance, Cout (pF) Forward Voltage, VF (mA) f = 1 MHz 1.4 IF = 50 mA 1.2 30 mA 20 mA 10 mA 1.0 5 mA 1 mA 0.8 -25 0 25 50 75 20 15 10 5 0 100 10 -8 10 -9 10 -10 10 -11 10 -12 10 -13 30 40 50 100 -1.0 -0.5 0 0.5 -100 -200 0 20 40 60 80 60 IF = 5 mA 200 VD = 40 V Load Current, IL (mA) Off-state Leakage, Current IF (mA) -7 20 LOAD CURRENT vs. LOAD VOLTAGE OFF-STATE LEAKAGE CURRENT vs. AMBIENT TEMPERATURE 10 10 Applied Voltage, VD (V) Ambient Temperature, TA (ºC) 100 Load Voltage, VL (V) Ambient Temperature, TA (ºC) 2-92 1.0 PS7802-1A TYPICAL CHARACTERISTICS (TA = 25ºC) ON-STATE RESISTANCE DISTRIBUTION 60 3.0 Normalized to 1.0 at TA = 25ºC, IF = 5 mA IL = 250 mA 2.5 Maximum Load Current, IL (mA) Normalized On-state Resistance, Ron (mA) NORMALIZED ON-STATE RESISTANCE vs. AMBIENT TEMPERATURE 2.0 1.5 1.0 0.5 0.0 -25 0 25 50 75 n = 50 pcs, IF = 5 mA IL = 250 mA 50 40 30 20 10 0 100 0.5 1.0 1.5 1.10 TURN-ON TIME vs. FORWARD CURRENT TURN-ON TIME vs. FORWARD CURRENT 0.5 0.10 VO = 5 V, RL = 500 Ω 0.4 0.08 Turn-off Time, toff (ms) Turn-on Time, ton (ms) VO = 5 V, RL = 500 Ω 0.06 0.04 0.3 0.2 0.1 0.02 0 5 10 15 20 25 0 30 5 10 15 20 25 30 Forward Current, IF (mA) Forward Current, IF (mA) TURN-OFF TIME DISTRIBUTION TURN-ON TIME DISTRIBUTION 30 30 n = 50 pcs, IF = 5 mA VO = 5 V, RL = 500 Ω 25 n = 50 pcs, IF = 5 mA VO = 5 V, RL = 500 Ω 25 20 Number (pcs) Number (pcs) 1.15 On-state Resistance, Ron (Ω) Ambient Temperature, TA (ºC) 15 10 5 20 15 10 5 0 0.05 0.075 0 0.100 0.125 0.06 0.150 0.07 0.08 0.09 Turn-off Time, toff (ms) Turn-on Time, Ton (ms) 2-93 0.10 PS7802-1A TYPICAL CHARACTERISTICS (TA = 25ºC) NORMALIZED TURN-OFF TIME vs. AMBIENT TEMPERATURE NORMALIZED TURN-ON TIME vs. AMBIENT TEMPERATURE 3.0 Normalized to 1.0 at TA = 25ºC, IF = 5 mA, VO = 5V, RL = 500 Ω 2.5 Normalized Turn-off Time, toff Normalized Turn-on Time, ton 3.0 2.0 1.5 1.0 0.5 0.0 -25 0 25 50 75 ERT (Equivalent Rate Time) measurement 250 mV 90% 10% tr (in) ERT = tr (out)2 – tr (in)2 Output 2.0 1.5 1.0 0.5 0 25 50 75 Ambient Temperature, TA (ºC) Ambient Temperature, TA (ºC) Input 2.5 0.0 -25 100 Normalized to 1.0 at TA = 25ºC, IF = 5 mA, VO = 5V, RL = 500 Ω 250 mV 90% 10% tr (out) 2-94 100 PS7802-1A TAPING SPECIFICATIONS (Units in mm) 1.75±0.1 Outline and Dimensions (Tape) 2.0±0.05 1.5 +0.1 -0 12.0±0.2 5.5±0.05 2.9 MAX 5.3±0.1 4.0±0.1 0.3 1.55±0.05 2.4±0.1 2.9±0.1 4.0±0.1 Tape Direction PS7802-1-F3 N N N N N N N N N PS7802-1-F4 Outline and Dimensions (Reel) R 1.0 ∅21.0±0.8 ∅13.0±0.2 2.0±0.5 ∅13.0±0.2 ∅330±2.0 ∅100±1.0 2.0±0.5 13.5±1.0 17.5±1.0 11.9 to 15.4 Outer edge of flange Packing: 3 500 pcs/reel 2-95 PS7802-1A RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering • Peak reflow temperature 260 ûC (package surface temperature) • Time of Peak reflow temperature 10 seconds or less • Time of temperature higher than 220 ˚C 60 seconds or less • Time to preheat temperature from 120 to 180 ˚C 120±30 s • Number of reflows Three • Flux Rosin ßux containing small amount of chlorine (The ßux with a max. chlorine content of 0.2 Wt % is recommended) Package Surface Temperatire T (ºC) Recommended Temperature Profile of Infrared Reflow (heating) t0 10 s 260 ºC MAX. 220 ºC to 60 s 180 ºC 120 ºC 120±30 s (preheating) (2) Wave soldering Time (s) • Temperature 260 ûC or below (molten solder temperature) • Time 10 seconds or less • Preheating conditions 120ûC or below (package surface temperature) • Number of times One • Flux Rosin ßux containing small amount of chlorine (The ßux with a max. chlorine content of 0.2 Wt % is recommended.) (3) Cautions • Fluxes Avoid removing the residual ßux with freon-based and chlorine-based cleaning solvent. Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale. 03/16/2004 A Business Partner of NEC Compound Semiconductor Devices, Ltd.