DATA SHEET PHOTOCOUPLER PS9587,PS9587L1,PS9587L2,PS9587L3 HIGH CMR, 10 Mbps OPEN COLLECTOR OUTPUT TYPE 8-PIN DIP HIGH-SPEED PHOTOCOUPLER −NEPOC FOR CREEPAGE DISTANCE OF 8 mm Series− DESCRIPTION The PS9587, PS9587L1, PS9587L2 and PS9587L3 are optically coupled isolators containing a GaAlAs LED on the input side and a photo diode and a signal processing circuit on the output side on one chip. The PS9587L1 and PS9587L2 are designed specifically for long creepage-distance as well as high common mode transient immunity (CMR) and high speed digital output type. Consequently, they are suitable for high speed logic interface that needs long creepage-distance (8 mm) on mounting. The PS9587L1 is lead bending type for long creepage distance. The PS9587L2 is lead bending type for long creepage distance (Gull-wing) for surface mount. The PS9587L3 is lead bending type (Gull-wing) for surface mounting. FEATURES PIN CONNECTIONS (Top View) • Long creepage distance (8 mm MIN.: PS9587L1, PS9587L2) • High common mode transient immunity (CMH, CML = ±15 kV/μs MIN.) • High isolation voltage (BV = 5 000 Vr.m.s.) 8 7 6 5 1 2 3 4 • High-speed response (10 Mbps) • Pulse width distortion (⏐tPHL − tPLH⏐ = 10 ns TYP.) • Open collector output • Ordering number of tape product: PS9587L2-E3: 1 000 pcs/reel : PS9587L3-E3: 1 000 pcs/reel 1. NC 2. Anode 3. Cathode 4. NC 5. GND 6. VO 7. NC 8. VCC • Pb-Free product • Safety standards • UL approved: File No. E72422 • CSA approved: No. CA 101391 • BSI approved: No. 8937, 8938 • SEMKO approved: No. 615433 • NEMKO approved: No. P06207243 • DEMKO approved: No. 314091 • FIMKO approved: No. FI 22827 • DIN EN60747-5-2 (VDE0884 Part2) approved (Option) APPLICATIONS • FA Network • Measurement equipment • PDP The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. Document No. PN10678EJ03V0DS (3rd edition) Date Published August 2008 NS Printed in Japan The mark <R> shows major revised points. The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field. 2007, 2008 PS9587,PS9587L1,PS9587L2,PS9587L3 PACKAGE DIMENSIONS (UNIT: mm) DIP Type PS9587 9.25 +0.5 –0.25 7.62 +0.4 1.01–0.2 +0.5 3.5±0.2 6.5–0.1 0 to 15˚ 2.54 0.5±0.15 Lead Bending Type (Gull-wing) For Surface Mount PS9587L3 +0.5 9.25–0.25 3.5±0.2 1.01 0.5±0.15 2 0.635±0.15 9.65±0.4 +0.4 –0.2 2.54 0.74±0.25 Data Sheet PN10678EJ03V0DS +0.5 6.5–0.1 PS9587,PS9587L1,PS9587L2,PS9587L3 Lead Bending Type For Long Creepage Distance PS9587L1 9.25 +0.5 –0.25 10.16 +0.5 6.5–0.1 3.5±0.2 1.01 +0.4 –0.2 0 to 15˚ 2.54 0.5±0.15 Lead Bending Type For Long Creepage Distance (Gull-wing) For Surface Mount PS9587L2 +0.5 9.25–0.25 11.8±0.4 3.5±0.2 0.5±0.15 +0.5 6.5–0.1 0.25±0.2 1.01 +0.4 –0.2 2.54 0.9±0.25 Data Sheet PN10678EJ03V0DS 3 PS9587,PS9587L1,PS9587L2,PS9587L3 FUNCTIONAL DIAGRAM 8 2 6 3 5 Shield <R> LED Output ON L OFF H MARKING EXAMPLE No. 1 pin Mark 9587 N 831 N Type Number Assembly Lot 8 31 Week Assembled Year Assembled (Last 1 Digit) In-house Code (L or T) Rank Code PHOTOCOUPLER CONSTRUCTION Parameter PS9587, PS9587L3 PS9587L1, PS9587L2 Air Distance (MIN.) 7 mm 8 mm Outer Creepage Distance (MIN.) 7 mm 8 mm 0.4 mm 0.4 mm Isolation Distance (MIN.) 4 Data Sheet PN10678EJ03V0DS PS9587,PS9587L1,PS9587L2,PS9587L3 ORDERING INFORMATION Part Number Order Number Solder Plating Packing Style Safety Standard Application Part Approval Number* Specification PS9587 PS9587-AX Pb-Free PS9587L1 PS9587L1-AX (Ni/Pd/Au) PS9587L2 Magazine case 50 pcs Standard products PS9587 (UL, CSA, BSI, PS9587L1 PS9587L2-AX SEMKO, NEMKO, PS9587L2 PS9587L3 PS9587L3-AX DEMKO, FIMKO PS9587L3 PS9587L2-E3 PS9587L2-E3-AX approved) PS9587L2 PS9587L3-E3 PS9587L3-E3-AX PS9587-V PS9587-V-AX PS9587L1-V Embossed Tape 1 000 pcs/reel 1 PS9587L3 Magazine case 50 pcs DIN EN60747-5-2 PS9587 PS9587L1-V-AX (VDE0884 Part2) PS9587L1 PS9587L2-V PS9587L2-V-AX Approved (Option) PS9587L2 PS9587L3-V PS9587L3-V-AX PS9587L2-V-E3 PS9587L2-V-E3-AX PS9587L3-V-E3 PS9587L3-V-E3-AX PS9587L3 Embossed Tape 1 000 pcs/reel PS9587L2 PS9587L3 *1 For the application of the Safety Standard, following part number should be used. Data Sheet PN10678EJ03V0DS 5 PS9587,PS9587L1,PS9587L2,PS9587L3 ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified) Parameter Symbol Ratings Unit Forward Current IF 30 mA Reverse Voltage VR 5 V Supply Voltage VCC 7 V Output Voltage VO 7 V IO 25 mA PC 40 mW BV 5 000 Vr.m.s. Operating Ambient Temperature TA −40 to +85 °C Storage Temperature Tstg −55 to +125 °C Diode Detector *1 Output Current Power Dissipation Isolation Voltage *2 *3 *1 Reduced to 0.3 mA/°C at TA = 25°C or more. *2 Applies to output pin VO (Collector pin). Reduced to 1.5 mW/°C at TA = 65°C or more. *3 AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output. Pins 1-4 shorted together, 5-8 shorted together. RECOMMENDED OPERATING CONDITIONS (TA = 25°C) Parameter Symbol MIN. TYP. MAX. Unit High Level Input Current IFH 6.3 10 12.0 mA Low Level Input Voltage VFL 0 0.8 V Supply Voltage VCC 4.5 5.5 V TTL (RL = 1 kΩ, loads) N Pull-up Resistance RL 6 5.0 5 330 4k Data Sheet PN10678EJ03V0DS Ω PS9587,PS9587L1,PS9587L2,PS9587L3 ELECTRICAL CHARACTERISTICS (TA = −40 to +85°C, unless otherwise specified) Parameter Diode Detector Conditions *1 MIN. TYP. 1.4 1.65 MAX. Unit 1.8 V 10 μA Forward Voltage VF IF = 10 mA, TA = 25°C Reverse Current IR VR = 3 V, TA = 25°C Terminal Capacitance Ct VF = 0 V, f = 1 MHz, TA = 25°C 30 150 pF High Level Output Current IOH VCC = VO = 5.5 V, VF = 0.8 V 1 100 μA VOL VCC = 5.5 V, IF = 5 mA, IOL = 13 mA 0.2 0.6 V High Level Supply Current ICCH VCC = 5.5 V, IF = 0 mA, VO = Open 5 8 mA Low Level Supply Current ICCL VCC = 5.5 V, IF = 10 mA, VO = Open 9 11 mA Threshold Input Current (H → L) IFHL 3.3 mA Low Level Output Voltage Coupled Symbol *2 TA = 25°C VCC = 5 V, VO = 0.8 V, RL = 350 Ω 1.5 Ω 11 Isolation Resistance RI-O VI-O = 1 kVDC, RH = 40 to 60%, TA = 25°C Isolation Capacitance CI-O V = 0 V, f = 1 MHz, TA = 25°C 0.9 5 pF Propagation Delay Time tPHL VCC = 5 V, 35 75 ns (H → L) *3 Propagation Delay Time 10 5 TA = 25°C VTHHL = VTHLH = 1.5 V, tPLH (L → H) *3 RL = 350 Ω, 100 TA = 25 °C 45 IF = 7.5 mA, CL = 15 pF 75 ns 100 Rise Time tr 20 ns Fall Time tf 10 ns ⏐tPHL-tPLH⏐ 10 Pulse Width Distortion (PWD) 50 ns 60 ns *3 Propagation Delay Skew tPSK Common Mode CMH VCC = 5 V, TA = 25°C, IF = 0 mA, 15 kV/μs 15 kV/μs VO (MIN.) = 2 V, VCM = 1.5 kV, RL = 350 Ω Transient Immunity at High Level *4 Output Common Mode Transient Immunity at Low Level CML VCC = 5 V, TA = 25°C, IF = 7.5 mA, VO (MAX.) = 0.8 V, VCM = 1.5 kV, RL = 350 Ω *4 Output Data Sheet PN10678EJ03V0DS 7 PS9587,PS9587L1,PS9587L2,PS9587L3 *1 Typical values at TA = 25°C *2 Because VOL of 2 V or more may be output when LED current is input and when output power supply is on and off, confirm the characteristics (operation with the power supply on and off) during design, before using this device. *3 Test circuit for propagation delay time VCC = 5 V Pulse input (IF) (IF = 7.5 mA) Input 50% (PW = 1 μ s, Duty cycle = 1/10) 0.1 μ F Input (monitor) RL = 350 Ω 0V 5V VO (monitor) CL = 15 pF VOH Output 1.5 V VOL 47 Ω tPHL tPLH Remark CL includes probe and stray wiring capacitance. *4 Test circuit for common mode transient immunity VCC = 5 V SW IF 0.1 μ F 1.5 kV VCM 90% 10% RL = 350 Ω 0V tr tf VO (monitor) CL = 15 pF VCM VO (IF = 0 mA) VO (IF = 7.5 mA) VOH 2V 0.8 V VOL Remark CL includes probe and stray wiring capacitance. USAGE CAUTIONS 1. This product is weak for static electricity by designed with high-speed integrated circuit so protect against static electricity when handling. 2. By-pass capacitor of more than 0.1 μF is used between VCC and GND near device. Also, ensure that the distance between the leads of the photocoupler and capacitor is no more than 10 mm. 3. Avoid storage at a high temperature and high humidity. 8 Data Sheet PN10678EJ03V0DS PS9587,PS9587L1,PS9587L2,PS9587L3 TYPICAL CHARACTERISTICS (TA = 25°C, unless otherwise specified) MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE DETECTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE 50 Detector Power Dissipation PC (mW) Maximum Forward Current IF (mA) 40 30 20 10 0 25 50 75 85 100 125 20 10 25 100 FORWARD CURRENT vs. FORWARD VOLTAGE SUPPLY CURRENT vs. AMBIENT TEMPERATURE 125 14 TA = +85˚C +50˚C +25˚C 0˚C –20˚C –40˚C 1 0.1 1.2 1.4 1.6 1.8 2.0 2.2 2.4 Vcc = 5.5 V 12 10 ICCL (IF = 10 mA) 8 6 4 ICCH (IF = 0 mA) 2 0 –50 –25 Forward Voltage VF (V) 0 25 50 75 100 Ambient Temperature TA (˚C) LOW LEVEL OUTPUT VOLTAGE vs. AMBIENT TEMPERATURE OUTPUT VOLTAGE vs. FORWARD CURRENT 6 0.6 Low Level Output Voltage VOL (V) VCC = 5.0 V 5 Output Voltage VO (V) 85 75 Ambient Temperature TA (˚C) 10 4 3 2 RL = 350 Ω 1 0 50 Ambient Temperature TA (˚C) High Level Supply Current ICCH (mA) Low Level Supply Current ICCL (mA) Forward Current IF (mA) 30 0 100 0.01 1.0 40 1.0 kΩ 4.0 kΩ 1 2 3 4 5 IF = 5.0 mA, VCC = 5.5 V 0.5 0.4 IOL = 16.0 mA 13.0 mA 10.0 mA 6.0 mA 0.3 0.2 0.1 0 –50 –25 0 25 50 75 100 Ambient Temperature TA (˚C) Forward Current IF (mA) Remark The graphs indicate nominal characteristics. Data Sheet PN10678EJ03V0DS 9 PS9587,PS9587L1,PS9587L2,PS9587L3 PROPAGATION DELAY TIME vs. AMBIENT TEMPERATURE THRESHOLD INPUT CURRENT vs. AMBIENT TEMPERATURE VCC = 5.0 V, VO = 0.8 V Propagation Delay Time tPHL, tPLH (ns) Threshold Input Current IFHL (mA) 5 RL = 350 Ω 4 1.0 kΩ 4.0 kΩ 3 2 1 0 –50 –25 0 25 50 75 100 100 80 tPLH: RL = 4.0 kΩ tPLH: RL = 350 Ω 60 tPLH: RL = 1.0 kΩ 40 tPHL: RL = 4.0 kΩ 20 tPHL: RL = 1.0 kΩ tPHL: RL = 350 Ω 0 –50 Ambient Temperature TA (˚C) 80 Switching Time tr, tf (ns) Pulse Width Distortion tPHL–tPLH (ns) 100 IF = 7.5 mA, VCC = 5.0 V 60 RL = 4.0 kΩ RL = 1.0 kΩ 20 –25 0 RL = 350 Ω 50 75 25 tr 20 –25 0 25 50 75 PULSE WIDTH DISTORTION vs. FORWARD CURRENT 100 100 tPLH: RL = 4.0 kΩ tPLH: RL = 1.0 kΩ 40 tPLH: RL = 350 Ω 20 tPHL: RL = 350 Ω, 1.0 kΩ, 4.0 kΩ 7.5 10 12.5 15 17.5 20 VCC = 5.0 V 80 60 40 RL = 4.0 kΩ 0 5 RL = 350 Ω RL = 1.0 kΩ 20 Forward Current IF (mA) 7.5 10 12.5 15 Forward Current IF (mA) Remark The graphs indicate nominal characteristics. 10 tf PROPAGATION DELAY TIME vs. FORWARD CURRENT Pulse Width Distortion tPHL–tPLH (ns) Propagation Delay Time tPHL, tPLH (ns) 40 Ambient Temperature TA (˚C) 100 0 5 60 Ambient Temperature TA (˚C) VCC = 5.0 V 60 80 IF = 7.5 mA, VCC = 5.0 V, RL = 350 Ω 0 –50 100 120 80 25 SWITCHING TIME vs. AMBIENT TEMPERATURE 100 0 –50 0 Ambient Temperature TA (˚C) PULSE WIDTH DISTORTION vs. AMBIENT TEMPERATURE 40 –25 IF = 7.5 mA, VCC = 5.0 V 50 75 100 Data Sheet PN10678EJ03V0DS 17.5 20 PS9587,PS9587L1,PS9587L2,PS9587L3 TAPING SPECIFICATIONS (UNIT: mm) 4.5 MAX. 12.8±0.1 11.5±0.1 1.5 +0.1 –0 24.0±0.3 2.0±0.1 4.0±0.1 1.75±0.1 Outline and Dimensions (Tape) 4.1±0.1 10.7±0.1 2.05±0.05 12.0±0.1 0.3±0.05 Tape Direction PS9587L2-E3 Pull-out direction Outline and Dimensions (Reel) R 1.0 100±1.0 2.0±0.5 13.0±0.2 330±2.0 2.0±0.5 21.0±0.8 25.5±1.0 29.5±1.0 Packing: 1 000 pcs/reel Data Sheet PN10678EJ03V0DS 23.9 to 27.4 Outer edge of flange 11 PS9587,PS9587L1,PS9587L2,PS9587L3 5.3 MAX. 10.4±0.1 7.5±0.1 1.5 +0.1 –0 16.0±0.3 2.0±0.1 4.0±0.1 1.75±0.1 Outline and Dimensions (Tape) 4.75±0.1 10.3±0.1 1.55±0.1 12.0±0.1 0.35±0.05 Tape Direction PS9587L3-E3 Outline and Dimensions (Reel) 2.0±0.5 R 1.0 21.0±0.8 100±1.0 330±2.0 2.0±0.5 13.0±0.2 17.5±1.0 21.5±1.0 Packing: 1 000 pcs/reel 12 Data Sheet PN10678EJ03V0DS 15.9 to 19.4 Outer edge of flange PS9587,PS9587L1,PS9587L2,PS9587L3 RECOMMENDED MOUNT PAD DIMENSIONS (UNIT: mm) B C D A Part Number Lead Bending PS9587L2 lead bending type (Gull-wing) for long creepage distance (surface mount) PS9587L3 lead bending type (Gull-wing) for surface mount A B C D 10.2 2.54 1.7 2.2 8.2 2.54 1.7 2.2 Data Sheet PN10678EJ03V0DS 13 PS9587,PS9587L1,PS9587L2,PS9587L3 NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering • Peak reflow temperature 260°C or below (package surface temperature) • Time of peak reflow temperature 10 seconds or less • Time of temperature higher than 220°C 60 seconds or less • Time to preheat temperature from 120 to 180°C 120±30 s • Number of reflows Three • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Package Surface Temperature T (˚C) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s 260˚C MAX. 220˚C to 60 s 180˚C 120˚C 120±30 s (preheating) Time (s) (2) Wave soldering • Temperature 260°C or below (molten solder temperature) • Time 10 seconds or less • Preheating conditions 120°C or below (package surface temperature) • Number of times One (Allowed to be dipped in solder including plastic mold portion.) • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Soldering by Soldering Iron • Peak Temperature (lead part temperature) 350°C or below • Time (each pins) 3 seconds or less • Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead (b) Please be sure that the temperature of the package would not be heated over 100°C 14 Data Sheet PN10678EJ03V0DS PS9587,PS9587L1,PS9587L2,PS9587L3 (4) Cautions • Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between collector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings. <R> USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity. Data Sheet PN10678EJ03V0DS 15 PS9587,PS9587L1,PS9587L2,PS9587L3 SPECIFICATION OF VDE MARKS LICENSE DOCUMENT Parameter Symbol Speck Unit Application classification (DIN EN 60664-1 VDE0110 Part 1) for rated line voltages ≤ 300 Vr.m.s. IV for rated line voltages ≤ 600 Vr.m.s. III Climatic test class (DIN EN 60664-1 VDE0110) 55/100/21 Dielectric strength maximum operating isolation voltage Test voltage (partial discharge test, procedure a for type test and random test) UIORM 1 130 Vpeak Upr 1 695 Vpeak Upr 2 119 Vpeak UTR 8 000 Vpeak Upr = 1.5 × UIORM, Pd < 5 pC Test voltage (partial discharge test, procedure b for all devices) Upr = 1.875 × UIORM, Pd < 5 pC Highest permissible overvoltage Degree of pollution (DIN EN 60664-1 VDE0110 Part 1) 2 Clearance distance >8.0 mm Creepage distance >8.0 mm Comparative tracking index (DIN IEC 112/VDE 0303 Part 1) CTI Material group (DIN EN 60664-1 VDE0110 Part 1) 175 III a Storage temperature range Tstg –55 to +125 °C Operating temperature range TA –40 to +85 °C VIO = 500 V dc at TA = 25°C Ris MIN. 10 12 Ω VIO = 500 V dc at TA MAX. at least 100°C Ris MIN. 10 11 Ω Package temperature Tsi 175 °C Current (input current IF, Psi = 0) Isi 400 mA Power (output or total power dissipation) Psi 700 mW Ris MIN. 10 Isolation resistance, minimum value Safety maximum ratings (maximum permissible in case of fault, see thermal derating curve) Isolation resistance VIO = 500 V dc at TA = Tsi 16 Data Sheet PN10678EJ03V0DS 9 Ω PS9587,PS9587L1,PS9587L2,PS9587L3 • The information in this document is current as of August, 2008. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. • No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. • NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. • Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. • While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC Electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. • NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customerdesignated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application. (Note) (1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. (2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above). M8E 02. 11-1 Data Sheet PN10678EJ03V0DS 17 PS9587,PS9587L1,PS9587L2,PS9587L3 Caution GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. • Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. • Do not burn, destroy, cut, crush, or chemically dissolve the product. • Do not lick the product or in any way allow it to enter the mouth.