DATA SHEET GaAs INTEGRATED CIRCUIT µPG2031TQ L-BAND SP3T SWITCH DESCRIPTION The µPG2031TQ is an L-band SP3T GaAs FET switch which was developed for CDMA/PCS/GPS triple mode digital cellular telephone application. The device can operate from 500 MHz to 2.0 GHz, having the low insertion loss and high linality. FEATURES • Low insertion loss : LINS = 0.45 dB TYP. @ Vcont = 2.8 V/0 V, f = 1.0 GHz : LINS = 0.55 dB TYP. @ Vcont = 2.8 V/0 V, f = 2.0 GHz • High isolation : ISL = 21 dB TYP. @ Vcont = 2.8 V/0 V, f = 2.0 GHz • High power : Pin (0.1 dB) = 33.0 dBm TYP. @ Vcont = 2.8 V/0 V, f = 1.0 GHz • High-density surface mounting : 10-pin plastic TSON package (2.30 × 2.55 × 0.60 mm) APPLICATION • CDMA/PCS/GPS triple mode digital cellular telephone etc. ORDERING INFORMATION Part Number µPG2031TQ-E1 Package 10-pin plastic TSON Marking 2031 Supplying Form • Embossed tape 8 mm wide • Pin 5, 6 face the perforation side of the tape • Qty 3 kpcs/reel Remark To order evaluation samples, contact your nearby sales office. Part number for sample order: µPG2031TQ Caution Observe precautions when handling because these devices are sensitive to electrostatic discharge. The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all devices/types available in every country. Please check with local NEC Compound Semiconductor Devices representative for availability and additional information. Document No. PG10436EJ01V0DS (1st edition) Date Published September 2003 CP(K) Printed in Japan NEC Compound Semiconductor Devices 2003 µPG2031TQ PIN CONNECTIONS AND INTERNAL BLOCK DIAGRAM (Top View) 10 9 8 7 6 Pin No. Pin Name (Bottom View) 1 RF1 6 2 GND 3 RF2 4 Vcont2 5 RF3 6 Vcont3 7 GND 2 3 4 8 ANT 9 GND 10 Vcont1 8 9 10 GND 2031 1 7 5 5 4 3 2 1 ABSOLUTE MAXIMUM RATINGS (TA = +25°C, unless otherwise specified) Parameter Symbol Ratings Unit Vcont −6.0 to +6.0 V Input Power Pin +36 dBm Operating Ambient Temperature TA −45 to +85 °C Storage Temperature Tstg −55 to +150 °C Switch Control Voltage RECOMMENDED OPERATING RANGE (TA = +25°C) Parameter Symbol MIN. TYP. MAX. Unit Switch Control Voltage (High) Vcont (H) 2.7 2.8 3.0 V Switch Control Voltage (Low) Vcont (L) −0.2 0 0.2 V 2 Data Sheet PG10436EJ01V0DS µPG2031TQ ELECTRICAL CHARACTERISTICS (TA = +25°C, Vcont = 2.8 V/0 V, ZO = 50 Ω, off chip DC blocking capacitors value: 56 pF, unless otherwise specified) Parameter Insertion Loss Isolation Symbol LINS ISL ON-Pass MIN. TYP. MAX. Unit f = 0.5 to 1.0 GHz − 0.45 0.65 dB f = 1.0 to 2.0 GHz − 0.55 0.80 dB ANT-RF1/2/3 f = 0.5 to 1.0 GHz 22 26 − dB (OFF) f = 1.0 to 2.0 GHz 17 21 − dB ANT-RF1/2/3 Test Conditions Input Return Loss RLin ANT-RF1/2/3 f = 0.5 to 2.0 GHz 15 20 − dB Output Return Loss RLout ANT-RF1/2/3 f = 0.5 to 2.0 GHz 15 20 − dB Pin (0.1 dB) ANT-RF1/2/3 f = 1.0 GHz 31.0 33.0 − dBm 2f0 ANT-RF1/2/3 f = 1.0 GHz, 65 75 − dBc 65 75 − dBc − 150 − ns − 1 50 µA 0.1 dB Gain Compression Input Power 2nd Harmonics Pin = 27 dBm 3rd Harmonics 3f0 ANT-RF1/2/3 f = 1.0 GHz, Pin = 27 dBm Switch Control Speed tsw Switch Control Current Icont RF Non Data Sheet PG10436EJ01V0DS 3 µPG2031TQ EVALUATION CIRCUIT C1 RF1 Vcont1 2031 C1 RF2 Vcont2 C1 C2 C2 ANT C1 LESD RF3 Note Vcont3 C2 Note Recommend attached LESD to antenna port for ESD protection. The application circuits and their parameters are for reference only and are not intended for use in actual design-ins. USING THE NEC EVALUATION BOARD Symbol Values C1 56 pF C2 1 000 pF TRUTH TABLE 4 RF1 Vcont1 GND GND RF2 ANT Vcont2 GND RF3 Vcont3 Vcont1 Vcont2 Vcont3 ANT-RF1 ANT-RF2 ANT-RF3 High Low Low ON OFF OFF Low High Low OFF ON OFF Low Low High OFF OFF ON Data Sheet PG10436EJ01V0DS µPG2031TQ PACKAGE DIMENSIONS (Bottom View) 0.18±0.05 (0.15) (1.95) (0.95) 2.25±0.1 2.55±0.15 (0.05) 0.40±0.05 (0.30) 10-PIN PLASTIC TSON (UNIT: mm) (1.70) 2.20±0.1 (0.30) (0.60 MAX.) (0.125) 2.30±0.15 Remark ( ) : Reference value Data Sheet PG10436EJ01V0DS 5 µPG2031TQ RECOMMENDED SOLDERING CONDITIONS This product should be soldered and mounted under the following recommended conditions. For soldering methods and conditions other than those recommended below, contact your nearby sales office. Soldering Method Infrared Reflow VPS Wave Soldering Soldering Conditions Condition Symbol Peak temperature (package surface temperature) : 260°C or below Time at peak temperature : 10 seconds or less Time at temperature of 220°C or higher : 60 seconds or less Preheating time at 120 to 180°C : 120±30 seconds Maximum number of reflow processes : 3 times Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below Peak temperature (package surface temperature) : 215°C or below Time at temperature of 200°C or higher : 25 to 40 seconds Preheating time at 120 to 150°C : 30 to 60 seconds Maximum number of reflow processes : 3 times Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below Peak temperature (molten solder temperature) : 260°C or below Time at peak temperature : 10 seconds or less IR260 VP215 WS260 Preheating temperature (package surface temperature) : 120°C or below Partial Heating Maximum number of flow processes : 1 time Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below Peak temperature (pin temperature) : 350°C or below Soldering time (per side of device) : 3 seconds or less Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below Caution Do not use different soldering methods together (except for partial heating). 6 Data Sheet PG10436EJ01V0DS HS350 µPG2031TQ • The information in this document is current as of September, 2003. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products and/or types are available in every country. Please check with an NEC sales representative for availability and additional information. • No part of this document may be copied or reproduced in any form or by any means without prior written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document. • NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC semiconductor products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC or others. • Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. • While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features. • NEC semiconductor products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. The recommended applications of a semiconductor product depend on its quality grade, as indicated below. Customers must check the quality grade of each semiconductor product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness to support a given application. (Note) (1) "NEC" as used in this statement means NEC Corporation, NEC Compound Semiconductor Devices, Ltd. and also includes its majority-owned subsidiaries. (2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for NEC (as defined above). M8E 00. 4 - 0110 Data Sheet PG10436EJ01V0DS 7 µPG2031TQ Caution GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. • Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. • Do not burn, destroy, cut, crush, or chemically dissolve the product. • Do not lick the product or in any way allow it to enter the mouth. For further information, please contact NEC Compound Semiconductor Devices, Ltd. http://www.ncsd.necel.com/ E-mail: [email protected] (sales and general) [email protected] (technical) 5th Sales Group, Sales Division TEL: +81-44-435-1588 FAX: +81-44-435-1579 NEC Compound Semiconductor Devices Hong Kong Limited E-mail: [email protected] (sales, technical and general) FAX: +852-3107-7309 TEL: +852-3107-7303 Hong Kong Head Office TEL: +886-2-8712-0478 FAX: +886-2-2545-3859 Taipei Branch Office FAX: +82-2-558-5209 TEL: +82-2-558-2120 Korea Branch Office NEC Electronics (Europe) GmbH http://www.ee.nec.de/ TEL: +49-211-6503-01 FAX: +49-211-6503-487 California Eastern Laboratories, Inc. http://www.cel.com/ TEL: +1-408-988-3500 FAX: +1-408-988-0279 0307