DATA SHEET GaAs INTEGRATED CIRCUIT µPG2054K GaAs MMIC DBS 4 x 2 IF SWITCH MATRIX FEATURES • High isolation : ISL = 40 dB TYP. @ f = 0.95 to 2.15 GHz, VCONT = +5.0 V/0 V • Control voltage : VCONT (H) = +3.0 to +5.5 V (+5.0 V TYP.) : VCONT (L) = −0.5 to +0.5 V (0 V TYP.) • Low insertion loss : LINS = 6.0 dB TYP. @ f = 0.95 to 2.15 GHz, VCONT = +5.0 V/0 V, ZO = 50 Ω • 20-pin 4 × 4 mm square micro lead package (20-pin plastic QFN (0.5 mm pitch)) APPLICATIONS • Direct Broadcast Satellite (DBS) • Switch Box • 4 × 2 switch matrix to L, S band applications ORDERING INFORMATION Part Number Order Number µPG2054K-E3 µPG2054K-E3-A Package 20-pin plastic QFN (0.5 mm pitch) (Pb-Free) Note Marking G2054 Supplying Form • Embossed tape 12 mm wide • Pin 1 to 5 face the perforation side of the tape • Qty 3 kpcs/reel Note With regards to terminal solder (the solder contains lead) plated products (conventionally plated), contact your nearby sales office. Remark To order evaluation samples, contact your nearby sales office. Part number for sample order: µPG2054K Caution Observe precautions when handling because these devices are sensitive to electrostatic discharge. The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all devices/types available in every country. Please check with local NEC Compound Semiconductor Devices representative for availability and additional information. Document No. PG10550EJ01V0DS (1st edition) Date Published December 2004 CP(K) Printed in Japan NEC Compound Semiconductor Devices, Ltd. 2004 µPG2054K ABSOLUTE MAXIMUM RATINGS (TA = +25°C, unless otherwise specified) Parameter Symbol Ratings Unit Supply Voltage VDD −1.0 to +6.0 V Control Voltage VCONT1 to 4 −1.0 to +6.0 V Note Total Power Dissipation Ptot 2 W Input Power Pin +10 dBm Operating Ambient Temperature TA −40 to +85 °C Storage Temperature Tstg −65 to +150 °C Note Mounted on double-sided copper-clad 50 × 50 × 1.6 mm epoxy glass PWB, TA = +85°C RECOMMENDED OPERATING CONDITIONS (TA = +25°C) Parameter Supply Voltage Note Control Voltage (H) Note Control Voltage (L) Symbol MIN. TYP. MAX. Unit VDD +3.0 +5.0 +5.5 V VCONT (H) +3.0 +5.0 +5.5 V VCONT (L) −0.5 0 +0.5 V Note VCONT (H) − VCONT (L) ≥ 3.0 V, VDD − VCONT (H) ≤ 0.3 V ELECTRICAL CHARACTERISTICS (TA = +25°C, VDD = +5.0 V, VCONT = +5.0 V/0 V, Pin = 0 dBm, ZO = 50 Ω, each port, unless otherwise specified) Parameter MIN. TYP. MAX. Unit f = 0.95 to 2.15 GHz − 6.0 8.0 dB LINS (0.95 GHz) − LINS (2.15 GHz) − 0.5 1.5 dB ISL f = 0.95 to 2.15 GHz 35 40 − dB Output Return Loss RLout f = 0.95 to 2.15 GHz 10 15 − dB Note 2 ICONT VCONT = +5.0 V/0 V, non-RF − − 0.5 mA IDD VCONT = +5.0 V/0 V, non-RF − − 2.0 mA Insertion Loss LINS Insertion Loss Flatness Isolation D/U-ratio Control Current Symbol Note 1 Supply Current ∆LINS Test Conditions Notes 1. Isolation D/U-ratio = (Signal leakage (off-state)) − (Insertion loss (on-state)) 2. Per 1 control pin 2 Data Sheet PG10550EJ01V0DS µPG2054K PIN CONNECTIONS (Top View) Pin No. Pin Name Pin No. Pin Name 1 VCONT1 11 GND 2 VCONT2 12 IN-C 3 GND 13 GND 6 7 8 9 10 4 IN-A 14 VCONT4 5 GND 15 VCONT3 6 IN-B 16 OUT2 7 GND 17 GND (GND) 8 GND 18 VDD 9 GND 19 GND 10 IN-D 20 OUT1 (Bottom View) Pin 1 Identifier (GND) 5 4 3 2 1 1 2 3 4 5 (GND) 6 7 8 9 10 (GND) 11 12 13 14 15 (GND) (GND) 20 19 18 17 16 20 19 18 17 16 (GND) (GND) GND 15 14 13 12 11 Data Sheet PG10550EJ01V0DS 3 µPG2054K TRUTH TABLE State ON CHANNEL CONTROL PINS OUT1 OUT2 VCONT1 VCONT2 VCONT3 VCONT4 IN-A IN-A Low Low Low Low 2 IN-B Low Low Low High 3 IN-C Low Low High Low 4 IN-D Low Low High High IN-A Low High Low Low 6 IN-B Low High Low High 7 IN-C Low High High Low 8 IN-D Low High High High IN-A High Low Low Low 10 IN-B High Low Low High 11 IN-C High Low High Low 12 IN-D High Low High High IN-A High High Low Low 14 IN-B High High Low High 15 IN-C High High High Low 16 IN-D High High High High 1 5 9 13 IN-B IN-C IN-D Remark High : +5 Vdc, Low : 0 Vdc. VCONT1 VCONT2 GND IN-A GND FUNCTIONAL DIAGRAM (GND) (GND) IN-B 4 : 16 DECODER OUT1 GND GND GND IN-D VDD GND OUT2 (GND) VCONT3 VCONT4 GND IN-C GND (GND) 4 GND Data Sheet PG10550EJ01V0DS µPG2054K 1 000 pF 1 000 pF GND GND DC Blocking Capacitor C = 1 000 pF VCONT1 IN-A VCONT2 EVALUATION CIRCUIT (VDD = +5.0 V, VCONT = +5.0 V/0 V, ZO = 50 Ω) Pin 1 Identifier (GND) (GND) OUT1 IN-B 1 000 pF GND 1 000 pF GND GND VDD GND GND RF Bypass Capacitor C = 1 000 pF IN-D 1 000 pF OUT2 (GND) DC Blocking Capacitor C = 1 000 pF GND GND (GND) 1 000 pF VCONT3 1 000 pF VCONT4 IN-C 1 000 pF Back Side : GND The application circuits and their parameters are for reference only and are not intended for use in actual design-ins. Data Sheet PG10550EJ01V0DS 5 µPG2054K ILLUSTRATION OF THE TEST CIRCUIT ASSEMBLED ON EVALUATION BOARD IN-A VCONT2 VCONT1 OUT1 IN-B VDD IN-D OUT2 IN-C DC Block Capacitor × 6 pcs Notes 1. Size : 45 × 45 mm 2. Material : RO4003 (Rogers), t = 0.51 mm, εr = 3.38 3. 6 : Through holes Data Sheet PG10550EJ01V0DS VCONT4 VCONT3 µPG2054K TYPICAL CHARACTERISTICS (TA = +25°C, VDD = +5.0 V, VCONT = +5.0 V/0 V, Pin = 0 dBm, ZO = 50 Ω, unless otherwise specified) SIGNAL LEAKAGE vs. FREQUENCY 0 –1 –10 –2 –20 –3 SIGNAL LEAKAGE (dB) Insertion Loss LINS (dB) INSERTION LOSS vs. FREQUENCY 0 Other mode –4 –5 –6 –7 On channel mode : AA, BB, CC,DD –8 –40 –50 –60 –70 –80 –9 –90 –10 0 –100 0 0.5 1.0 1.5 2.0 2.5 3.0 0.5 1.0 1.5 2.0 2.5 3.0 Frequency f (GHz) Frequency f (GHz) INPUT RETURN LOSS vs. FREQUENCY OUTPUT RETURN LOSS vs. FREQUENCY 0 0 Input deselected –10 –15 Input selected (MODE : AA, BB, CC, DD) –20 –25 –30 –35 –40 Input selected –45 –50 0 0.5 1.0 1.5 2.0 2.5 3.0 Output Return Loss RLout (dB) –5 Input Return Loss RLin (dB) –30 –5 –10 –15 –20 –25 –30 –35 –40 –45 –50 0 Frequency f (GHz) 0.5 1.0 1.5 2.0 2.5 3.0 Frequency f (GHz) Remark The graphs indicate nominal characteristics. Data Sheet PG10550EJ01V0DS 7 µPG2054K INSERTION LOSS vs. ON CHANNEL MODE INSERTION LOSS vs. ON CHANNEL MODE –3.0 –3.0 f = 1.5 GHz –4.0 Insertion Loss LINS (dB) Insertion Loss LINS (dB) f = 0.95 GHz –5.0 –6.0 –7.0 –4.0 –5.0 –6.0 –7.0 –8.0 –8.0 AA AB AC AD BA BB BC BD CA CB CC CD DA DB DC DD AA AB AC AD BA BB BC BD CA CB CC CD DA DB DC DD ON CHANNEL MODE ON CHANNEL MODE INSERTION LOSS vs. ON CHANNEL MODE ISOLATION D/U-RATIO vs. ON CHANNEL MODE –30 –3.0 f = 0.95 GHz Isolation D/U-Ratio ISL (dB) Insertion Loss LINS (dB) f = 2.15 GHz –4.0 –5.0 –6.0 –7.0 –35 –40 –45 –50 –55 –60 –8.0 AA AB AC AD BA BB BC BD CA CB CC CD DA DB DC DD AA AB AC AD BA BB BC BD CA CB CC CD DA DB DC DD ON CHANNEL MODE ON CHANNEL MODE ISOLATION D/U-RATIO vs. ON CHANNEL MODE ISOLATION D/U-RATIO vs. ON CHANNEL MODE –30 –30 f = 2.15 GHz Isolation D/U-Ratio ISL (dB) Isolation D/U-Ratio ISL (dB) f = 1.5 GHz –35 –40 –45 –50 –55 –60 –35 –40 –45 –50 –55 –60 AA AB AC AD BA BB BC BD CA CB CC CD DA DB DC DD AA AB AC AD BA BB BC BD CA CB CC CD DA DB DC DD ON CHANNEL MODE ON CHANNEL MODE Remark The graphs indicate nominal characteristics. 8 Data Sheet PG10550EJ01V0DS µPG2054K f = 0.95 GHz –5 –10 –15 –20 –25 –30 –35 –40 AA AB AC AD BA BB BC BD CA CB CC CD DA DB DC DD Output Return Loss (Worth case) RLout (dB) 0 OUTPUT RETURN LOSS (WORSE CASE) vs. ON CHANNEL MODE 0 f = 1.5 GHz –5 –10 –15 –20 –25 –30 –35 –40 AA AB AC AD BA BB BC BD CA CB CC CD DA DB DC DD ON CHANNEL MODE ON CHANNEL MODE OUTPUT RETURN LOSS (WORSE CASE) vs. ON CHANNEL MODE INSERTION LOSS vs. OPERATING AMBIENT TEMPERATURE –3.0 0 f = 0.95 GHz f = 2.15 GHz –5 –4.0 Insertion Loss LINS (dB) Output Return Loss (Worth case) RLout (dB) Output Return Loss (Worth case) RLout (dB) OUTPUT RETURN LOSS (WORSE CASE) vs. ON CHANNEL MODE –10 –15 –20 –25 –30 –5.0 –6.0 –7.0 –8.0 –35 –9.0 –40 –40°C AA AB AC AD BA BB BC BD CA CB CC CD DA DB DC DD +25°C ON CHANNEL MODE Operating Ambient Temperature TA (°C) INSERTION LOSS vs. OPERATING AMBIENT TEMPERATURE INSERTION LOSS vs. OPERATING AMBIENT TEMPERATURE –3.0 –3.0 f = 2.15 GHz f = 1.5 GHz –4.0 Insertion Loss LINS (dB) –4.0 Insertion Loss LINS (dB) +85°C –5.0 –6.0 –7.0 –5.0 –6.0 –7.0 –8.0 –8.0 –9.0 –9.0 –40°C +25°C –40°C +85°C Operating Ambient Temperature TA (°C) +25°C +85°C Operating Ambient Temperature TA (°C) Remark The graphs indicate nominal characteristics. Data Sheet PG10550EJ01V0DS 9 µPG2054K ISOLATION D/U-RATIO vs. OPERATING AMBIENT TEMPERATURE ISOLATION D/U-RATIO vs. OPERATING AMBIENT TEMPERATURE –30 –30 Isolation D/U-Ratio ISL (dB) f = 0.95 GHz f = 1.5 GHz Isolation D/U-Ratio ISL (dB) –35 –40 –45 –50 –55 –60 –40°C +25°C –35 –40 –45 –50 –55 –60 +85°C –40°C Operating Ambient Temperature TA (°C) ISOLATION D/U-RATIO vs. OPERATING AMBIENT TEMPERATURE –30 Isolation D/U-Ratio ISL (dB) f = 2.15 GHz –35 –40 –45 –50 –55 –60 –40°C +25°C +85°C Operating Ambient Temperature TA (°C) Remark The graphs indicate nominal characteristics. 10 Data Sheet PG10550EJ01V0DS +25°C +85°C Operating Ambient Temperature TA (°C) µPG2054K PACKAGE DIMENSIONS 20-PIN 4 × 4 mm SQUARE MICRO LEAD PACKAGE (20-PIN QFN (0.5 mm pitch)) (UNIT: mm) (Top View) (Side View) 4.15±0.15 0.9±0.1 3.80±0.1 0.01+0.04 –0.01 Pin 1 Identifier 3.80±0.1 (Bottom View) 0.23+0.07 –0.05 0.6 MAX. Pin 1 1.9 1.9 0.6 MAX. Pin 1 Identifier 45 0. 0. 20 0.45+0.2 –0.1 4.15±0.15 Pin 1 0.50 Data Sheet PG10550EJ01V0DS 11 µPG2054K RECOMMENDED SOLDERING CONDITIONS This product should be soldered and mounted under the following recommended conditions. For soldering methods and conditions other than those recommended below, contact your nearby sales office. Soldering Method Infrared Reflow Partial Heating Soldering Conditions Condition Symbol Peak temperature (package surface temperature) : 260°C or below Time at peak temperature : 10 seconds or less Time at temperature of 220°C or higher : 60 seconds or less Preheating time at 120 to 180°C : 120±30 seconds Maximum number of reflow processes : 3 times Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below Peak temperature (terminal temperature) : 350°C or below Soldering time (per side of device) : 3 seconds or less Maximum chlorine content of rosin flux (% mass) : 0.2%(Wt.) or below Caution Do not use different soldering methods together (except for partial heating). 12 Data Sheet PG10550EJ01V0DS IR260 HS350 µPG2054K When the product(s) listed in this document is subject to any applicable import or export control laws and regulation of the authority having competent jurisdiction, such product(s) shall not be imported or exported without obtaining the import or export license. • The information in this document is current as of December, 2004. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products and/or types are available in every country. Please check with an NEC sales representative for availability and additional information. • No part of this document may be copied or reproduced in any form or by any means without prior written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document. • NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC semiconductor products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC or others. • Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. • While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features. • NEC semiconductor products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. The recommended applications of a semiconductor product depend on its quality grade, as indicated below. Customers must check the quality grade of each semiconductor product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness to support a given application. (Note) (1) "NEC" as used in this statement means NEC Corporation, NEC Compound Semiconductor Devices, Ltd. and also includes its majority-owned subsidiaries. (2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for NEC (as defined above). M8E 00. 4 - 0110 Data Sheet PG10550EJ01V0DS 13 µPG2054K Caution GaAs Products This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. • Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. • Do not burn, destroy, cut, crush, or chemically dissolve the product. • Do not lick the product or in any way allow it to enter the mouth. For further information, please contact NEC Compound Semiconductor Devices, Ltd. http://www.ncsd.necel.com/ E-mail: [email protected] (sales and general) [email protected] (technical) Sales Division TEL: +81-44-435-1588 FAX: +81-44-435-1579 NEC Compound Semiconductor Devices Hong Kong Limited E-mail: [email protected] (sales, technical and general) FAX: +852-3107-7309 TEL: +852-3107-7303 Hong Kong Head Office TEL: +886-2-8712-0478 FAX: +886-2-2545-3859 Taipei Branch Office FAX: +82-2-558-5209 TEL: +82-2-558-2120 Korea Branch Office NEC Electronics (Europe) GmbH http://www.ee.nec.de/ TEL: +49-211-6503-0 FAX: +49-211-6503-1327 California Eastern Laboratories, Inc. http://www.cel.com/ TEL: +1-408-988-3500 FAX: +1-408-988-0279 0406