Industrial Power Supplies NI PS-15, NI PS-16, NI PS-17 NEW! ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ ■■ 24 VDC power supplies for CompactRIO, NI CompactDAQ, Compact FieldPoint, NI Single-Board RIO, NI Smart Cameras, and NI touch panel computers Full output power between -25 and +60 °C 115/230 V autoselect input Efficiencies up to more than 90 percent Low input rush current 20 or 50 percent power reserves for dynamic loads Toolless spring-clamp terminals for easy field connectivity DIN-rail mounting included and panel/side mount accessories available -25 to 70 °C operating temperature range Product Temperature Range (°C) Size WxHxD (mm) Weight (g) Part Number 90 to 132/ 180 to 264 VAC -25 to +70 32 by 124 by 117 500 781093-01 240 90 to 132/ 180 to 264 VAC -25 to +70 60 by 124 by 117 700 781094-01 480 85 to 276 VAC/ 88 to 375 VDC -25 to +70 82 by 124 by 127 1200 781095-01 Output Voltage (V) Output Current (A) Output Power (W) Input Voltage PS-15 24 to 28 5 120 PS-16 24 to 28 10 PS-17 24 to 28 20 Table 1. NI Power Supply Selection Guide Overview and Applications Mounting Options The NI PS-15, PS-16, and PS-17 industrial power supplies feature long expected The PS-15/16/17 power supplies include clips for DIN-rail mounting. life, generous power reserves, and compact size. The 24 V supplies are ideal National Instruments provides optional accessories for wall, panel, and side for powering any NI CompactRIO, NI Compact FieldPoint, NI Single-Board RIO, mounting to minimize install depth. You can couple the included DIN-rail NI Smart Camera, NI touch panel, or NI CompactDAQ system, as well as heavy mounting bracket with the side mount kit for a low-profile DIN-rail installation. accessory loads such as DC motor drives. The DIN-rail system and spring clamp terminals do not require tools and make installation fast and easy. Wide range Product Installed Width (mm) Installed Height (mm) Installed Depth (mm) Bracket Weight (g) and autoselect input voltages help you avoid user errors. The wide operating Part Number temperature range and extraordinary EMI immunity enables trouble-free 199432-01 Panel mount kit for PS-15/16/17 Equal to PS width 143 PS depth + 7 50 199429-01 Side mount kit for PS-15 118 145 38 (panel)/ 44 (DIN) 140 199430-01 Side mount kit for PS-16 118 145 66 (panel)/ 72 (DIN) 180 199431-01 Side mount kit for PS-17 138 145 88 (panel)/ 94 (DIN) 205 operation even under harsh conditions. Depending on the device, NI industrial power supplies guarantee power reserves of 20 to 50 percent. For the PS-15 and PS-16, you can use this extra current continuously for ambient temperatures under 45 °C. With these power reserves, you may not need to oversize for dynamic loads, but you can simply choose a unit that meets the operating requirements. In some cases, you can select a smaller unit to save money and space. Table 2. NI Power Supply Mounting Accessories (See the NI PS-15/16/17 User Guide manual at ni.com/manuals for more information.) Industrial Power Supplies Specifications Environmental Specifications subject to change without notice. For complete specifications, Operational Temperature see the NI PS-15/16/17 User Guide manual at ni.com/manuals. PS-15/16/17...................................... -25 to +70 °C Dimensions and Weight Output Derating WxHxD (mm) PS-15................................................. 3 W/°C (60 to 70 °C) PS-15................................................. 32 by 124 by 117 PS-16................................................. 6 W/°C (60 to 70 °C) PS-16................................................. 60 by 124 by 117 PS-17................................................. 12 W/°C (60 to 70 °C) PS-17................................................. 82 by 124 by 127 Note: To meet this operating temperature range, follow the guidelines in the Weight user guide for your industrial power supply. PS-15................................................. 500 g (1.1 lb) PS-16................................................. 700 g (1.54 lb) PS-17................................................. 1200 g (2.65 lb) (reduce output power above 60 °C) Storage Temperature PS-15/16/17...................................... -40 to +85 °C Ingress Protection (EN/IEC 60529) Input Characteristics PS-15/16/17...................................... IP 20 Input Voltage Range Operating Humidity (IEC 60068-2-30) PS-15/16 voltage............................... 90 to 132 VAC/180 to 264 VAC PS-15/16/17...................................... 5 to 95% RH, noncondensing PS-17 voltage.................................... 85 to 276 VAC/88 to 375 VDC Maximum Altitude................................. 6000 m (reduce output power PS-15/16/17 input frequency................. 50 to 60 Hz ±6% Power Factor Altitude Output Derating (above 2000 m) PS-15................................................. 0.56 @120 VAC, 24 V, 5 A PS-15................................................. 7.5 W or 5 °C per 1000 m PS-16................................................. 0.59 @120 VAC, 24 V, 10 A PS-16................................................. 15 W or 5 °C per 1000 m PS-17................................................. 0.95 @120 VAC, 24 V, 20 A PS-17................................................. 30 W or 5 °C per 1000 m Output Characteristics or ambient temp above 2000 m) Pollution Degree (EN 50178).................. 2, not conductive Output Voltage Range Shock and Vibration PS-15/16/17...................................... 24 to 28 VDC Operating Vibration, Sinusoidal (IEC 60068-2-6) Output Power (-25 to +60 °C) PS-15/16/17...................................... 2 to 17.8 Hz: ±1.6 mm; 17.8 to 500 Hz: PS-15 ................................................ 120 W PS-16................................................. 240 W Operating Shock (IEC 60068-2-27) PS-17................................................. 480 W PS-15/16/17...................................... 30 g, 6 ms, 20 g, 11 ms, Output Current (-25 to +60 °C) PS-15................................................. 5 A @24 V/ 4.3 A @28 V Operating Vibration, Random (60060-2-64) PS-16................................................. 10 A @24 V/ 8.6 A @28 V PS-17................................................. 0.5 m2(s3); 2 hours/axis 2 g, 2 hours/axis 3 bumps/direction, 18 bumps total PS-17................................................. 20 A @24 V/ 17 A @28 V Ripple and Noise Voltage PS-15/16............................................ 50 mVpp PS-17................................................. 100 mVpp Output Capacitance PS-15................................................. 1800 µF PS-16................................................. 7000 µF PS-17................................................. 8500 µF Ordering Information NI PS-15..........................................................................................781093-01 NI PS-16..........................................................................................781094-01 NI PS-17..........................................................................................781095-01 Accessories Panel mount kit for NI PS-15/16/17...............................................199432-01 Efficiency BUY NOW PS-15................................................. 89.4% @120 VAC, 24 V, 5 A For complete product specifications, pricing, and accessory information, call 800 813 3693 (U.S.) or go to ni.com/compactrio. PS-16................................................. 91.0% @120 VAC, 24 V, 10 A PS-17................................................. 92.4% @120 VAC, 24 V, 20 A BUY ONLINE at ni.com or C ALL 800 813 36 93 (U.S.) 2 Industrial Power Supplies Safety Approvals These products are designed to meet the requirements of the following 18WM LISTED IND. CONT. EQ. standards of safety for electrical equipment for measurement, control, and RECOGNIZED as Information Technology Equipment (UL 60950-1) laboratory use: SELV......................................................IEC/EN 60950-1 PELV......................................................EN 60204-1, EN 50178, IEC 60364-4-41 Note: For UL and other safety certifications, refer to the product label or visit ni.com/certification, search by model number or product line, and click the appropriate link in the Certification column. LISTED as Industrial Control Equipment (UL 508) GL GL (Germanischer Lloyd) classified for marine and offshore applications. Environmental category: C, EMC2 Online Product Certification Refer to the product Declaration of Conformity (DoC) for additional regulatory compliance information. To obtain product certifications and the DoC for this Electromagnetic Compatibility product, visit ni.com/certification, search by model number or product line, This product meets the requirements of the following EMC standards for and click the appropriate link in the Certification column. electrical equipment for measurement, control, and laboratory use: EN 61000-6-2, EN 61000-6-1 EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-11 VDE 0160 EN 55011 Emissions; Group 1, Class A CE, C-Tick, ICES, and FCC Part 15 Emissions; Class A Environmental Management Note: For EMC compliance, operate this product according to the documentation. Web page at ni.com/environment. This page contains the environmental CE Compliance regulations and directives with which NI complies, as well as other ■■ ■■ ■■ ■■ ■■ National Instruments is committed to designing and manufacturing products in an environmentally responsible manner. NI recognizes that eliminating certain hazardous substances from our products is beneficial not only to the environment but also to NI customers. For additional environmental information, refer to the NI and the Environment This product meets the essential requirements of applicable European Directives environmental information not included in this document. as follows: 2006/95/EC, Low-Voltage Directive (safety) 2004/108/EC, Electromagnetic Compatibility Directive (EMC) Waste Electrical and Electronic Equipment (WEEE) ■■ ■■ EU Customers: At the end of their life cycle, all products must be sent to a WEEE recycling center. For more information about WEEE recycling centers and National Instruments WEEE initiatives, visit ni.com/environment/weee.htm. BUY ONLINE at ni.com or C ALL 800 813 36 93 (U.S.) 3 NI Services and Support your needs around the globe and through PL AN MA IN NI has the services and support to meet IN TA the application life cycle – from planning and development through deployment and SERVICE NEEDS ongoing maintenance. We offer services P DE EL OP and service levels to meet customer LO Y requirements in research, design, validation, V DE and manufacturing. Visit ni.com/services. Local Sales and Technical Support In offices worldwide, our staff is local to the country, giving you access to engineers who speak your language. NI delivers industry-leading technical support through online knowledge bases, our applications engineers, and access to 14,000 measurement and automation professionals within NI Developer Exchange forums. Find immediate answers to your questions at ni.com/support. We also offer service programs that provide automatic upgrades to your application development environment and higher levels of technical support. Training and Certification Visit ni.com/ssp. NI training is the fastest, most certain route to productivity with our products. Hardware Services NI training can shorten your learning curve, save development time, and reduce maintenance costs over the application life cycle. We schedule instructor-led System Assurance Programs courses in cities worldwide, or we can hold a course at your facility. We also NI system assurance programs are designed to make it even easier for you offer a professional certification program that identifies individuals who have to own an NI system. These programs include configuration and deployment high levels of skill and knowledge on using NI products. services for your NI PXI, CompactRIO, or Compact FieldPoint system. The NI Basic Visit ni.com/training. System Assurance Program provides a simple integration test and ensures that Professional Services your system is delivered completely assembled in one box. When you configure your system with the NI Standard System Assurance Program, you can select Our NI Professional Services team is composed of NI applications and systems from available NI system driver sets and application development environments engineers and a worldwide National Instruments Alliance Partner program of to create customized, reorderable software configurations. Your system arrives more than 600 independent consultants and integrators. Services range from fully assembled and tested in one box with your software preinstalled. When start-up assistance to turnkey system you order your system with the standard program, you also receive system- integration. Visit ni.com/alliance. specific documentation including a bill of materials, an integration test report, a recommended maintenance plan, and frequently asked question documents. OEM Support Finally, the standard program reduces the total cost of owning an NI system We offer design-in consulting and product integration assistance if you want to online product advisors at ni.com/advisor to find a system assurance program use our products for OEM applications. For information about special pricing and services for OEM customers, visit ni.com/oem. by providing three years of warranty coverage and calibration service. Use the to meet your needs. Calibration Services NI recognizes the need to maintain properly calibrated devices for highaccuracy measurements. We provide manual calibration procedures, services to recalibrate your products, and automated calibration software specifically designed for use by metrology laboratories. Visit ni.com/calibration. Repair and Extended Warranty NI provides complete repair services for our products. Express repair and advance replacement services are also available. We offer extended warranties to help you meet project life-cycle requirements. Visit ni.com/services. ni.com n 800 813 3693 National Instruments n [email protected] ©2009 National Instruments. All rights reserved. CompactRIO, FieldPoint, National Instruments, National Instruments Alliance Partner, NI, ni.com, and NI CompactDAQ are trademarks of National Instruments. Other product and company names listed are trademarks or trade names of their respective companies. A National Instruments Alliance Partner is a business entity independent from National Instruments and has no agency, partnership, or joint-venture relationship with National Instruments. 2009-11329-161-101-D