PCI Express Control of PXI Express (MXI-Express for PXI Express) NI PXIe-PCIe8361, NI PXIe-PCIe8362, NI PCIe-8361, NI PCIe-8362, NI PXIe-8360 ◾◾ Higher throughput ◾◾ PCI Express control of PXI Express/ CompactPCI Express ◾◾ Control of two PXI Express/ CompactPCI Express chassis from a single PCI Express board (NI PCIe-8362) ◾◾ Sustained throughput ◾◾ 208 MB/s (2 chassis, NI PXIe-PCIe8362) ◾◾ 92 MB/s (1 chassis, NI PXIe-PCIe8361) ◾◾ Ability to use the same PCI Express boards (NI PCIe-8361, NI PCIe-8362) and cable as MXI-Express ◾◾ Software-transparent link that requires no programming ◾◾ Cabling up to 7 m ◾◾ Rugged connectivity Overview Cabled PCI Express Technology With NI MXI-Express for PXI Express interface kits, PC users with PCI Express The NI PCIe-8361 and PCIe-8362 boards provide one or two cabled PCI Express slots can exercise direct control of PXI Express systems using cabled PCI Express links, respectively. The links have x1 (“by one”) lane widths. The NI PXIe-8360 technology. NI MXI-Express for PXI Express, a high-bandwidth serial link module connects these PCI Express links to the PCI Express bus used in the transparent to software applications and drivers, provides the ability to use PXI Express chassis backplane. Thus, all PXI and PXI Express modules appear high-performance desktop computers, servers, and workstations to control as PCI boards within the computer itself. PXI Express systems. PCI Express Control of PXI Express PCI Software Compatibility PCI Express features software compatibility with PCI. Without making any With a MXI-Express for PXI Express link, you can transparently control a modifications to your software, you can use the MXI-Express for PXI Express link PXI Express system from any PCI Express slot, so you can use desktop computers, with an application written for a PXI system controlled via a PCI or PCI Express servers, and workstations to control PXI Express systems. MXI-Express for remote controller, such as MXI-3, MXI-4, or MXI-Express. PXI Express features a transparent link where all PXI and PXI Express modules appear as PCI boards within the computer itself. However, you benefit from the Multichassis PXI Systems increased number of slots, power and cooling per slot, module selection, and You can use a single NI PCIe-8362 board to simultaneously control two PXI Express synchronization features provided by PXI. The MXI-Express for PXI Express link systems. You also can incorporate multiple NI PCIe-8361 or PCIe-8362 boards consists of an NI PCIe-8361 or PCIe-8362 board in the PC that is connected via in a PC with multiple PCI Express slots to add PXI Express chassis to a system. a MXI-Express cable to an NI PXIe-8360 module in slot 1 of a PXI Express You cannot use an NI PXIe-8360 module to daisy chain multiple PXI Express chassis. The NI PCIe-8361 board provides one PCI Express link, which you can chassis. However, using MXI-4, you can connect a PXI Express chassis to a PXI cable to an NI PXIe-8360 module in a PXI Express chassis. The NI PCIe-8362 chassis in a star or daisy-chain configuration within a single system. To connect board provides two PCI Express links, each of which you can cable to individual a PXI Express chassis to a PXI chassis with MXI-4, install an NI PXI-8331 (copper) NI PXIe-8360 modules in separate PXI Express chassis. Thus, you can use a or PXI-8336 (fiber-optic) module in any PXI peripheral slot of the master PXI Express single NI PCIe-8362 board and two NI PXIe-8360 modules to simultaneously chassis, and connect it with the appropriate cable to a second PXI-8331 or control two PXI Express systems. For your convenience, you can purchase either PXI-8336 in slot 1 of the slave PXI chassis. a complete MXI-Express for PXI Express kit with all necessary components or the PCI Express board, PXI Express module, and cable separately. PCI Express Control of PXI Express (MXI-Express for PXI Express) Ordering Information For online configuration of a complete PXI system, including chassis, modules, and all accessories, visit ni.com/pxiadvisor. MXI-Express for PXI Express/CompactPCI Express Kit NI PXIe-PCIe8362............................................................................779702-03 Kit includes one PCI Express board (NI PCIe-8362), one PXI Express module (NI PXIe-8360), and one 3 m cable. NI PXIe-PCIe8361............................................................................779701-03 Kit includes one PCI Express board (NI PCIe-8361), one PXI Express module (NI PXIe-8360), and one 3 m cable. MXI-Express for PXI Express Interface Module NI PXIe-8360...................................................................................779700-01 PCI Express MXI-Express Interface Board NI PCIe-8362...................................................................................779502-01 NI PCIe-8361...................................................................................779504-01 MXI-Express/ExpressCard MXI Cables 1 m ...............................................................................................779500-01 3 m ...............................................................................................779500-03 7 m ...............................................................................................779500-07 BUY NOW For complete product specifications, pricing, and accessory information, call 800 813 3693 (U.S.) or go to ni.com/pxiadvisor. BUY ONLINE at ni.com or C ALL 800 813 36 93 (U.S.) 2 PCI Express Control of PXI Express (MXI-Express for PXI Express) Specifications Maximum altitude.................................. 2,000 m Pollution Degree.................................... 2 Specifications are subject to change without notice. Indoor use only. Bus Interface Storage Environment Form factor............................................. x1 PCI Express Slot compatibility................................... x1, x4, x8, and NI PXIe-8360 x161 Ambient temperature range.............. -40 to 71 °C PCI Express slots 1Some motherboard manufacturers intend the x16 slot for graphics use and preinstall a graphics board. Check with the motherboard manufacturer for alternative graphics solutions if using the x16 slot for a nongraphics board. Power Requirements NI PXIe-8360 NI PCIe-8361 NI PCIe-8362 (tested in accordance with IEC-60068-2-1 and IEC-60068-2-2; meets MIL-PRF-28800F Class 3 limits) Relative humidity range.................... 5 to 95%, noncondensing Power Rail Typical Current Maximum Current +3.3 V 2.5 A 3A (tested in accordance with IEC-60068-2-56) NI PCIe-8361 +5 V 0A 0A +12 V 0A 0A +5 VAUX 0.3 A 0.4 A (tested in accordance with IEC-60068-2-1 and IEC-60068-2-2) Ambient temperature range.............. -20 to 70 °C +3.3 V 1.800 A 2.000 A +3.3 VAUX 0A 0A Relative humidity range.................... 5 to 95%, noncondensing +12 V 0A 0A (tested in accordance +3.3 V 580 mA 1.040 A with IEC-60068-2-56) +3.3 VAUX 10 mA 50 mA NI PCIe-8362 +12 V 0A 0A Physical Dimensions NI PXIe-8360...................................... 10.0 by 16.0 cm (3.9 by 6.3 in.) NI PCIe-8361...................................... 10.7 by 17.5 cm (4.4 by 6.9 in.) NI PCIe-8362...................................... 9.93 by 7.11 cm (3.91 by 2.8 in.) Slot requirements NI PXIe-8360...................................... One 3U PXI Express system controller slot Ambient temperature range.............. -40 to 70 °C (tested in accordance with IEC-60068-2-1 and IEC-60068-2-2) Relative humidity range.................... 5 to 95%, noncondensing (tested in accordance with IEC-60068-2-56) Shock and Vibration NI PXIe-8360 Operating............................................... 30 g peak, half-sine, 11 ms pulse NI PCIe-8361 and PCIe-8362............. One PCI Express slot (tested in accordance with Maximum cable length.......................... 7 m IEC-60068-2-27; meets MIL-PRF-28800F Compatibility.......................................... Fully compatible with the PXI Express Class 2 limits) Hardware Specification, Revision 1.0 Random Vibration and the PICMG CompactPCI Express EXP.0 R1.0 Specification Operating........................................... 5 to 500 Hz, 0.3 grms Operating Environment Nonoperating..................................... 5 to 500 Hz, 2.4 grms (tested in accordance with IEC-60068-2-64; nonoperating test Ambient temperature range.............. 0 to 55 °C profile exceeds the requirements of (tested in accordance with MIL-PRF-28800F, Class 3) IEC-60068-2-1 and IEC-60068-2-2; meets MIL-PRF-28800F Class 3 low temperature limit and MIL-PRF-28800F Class 2 high temperature limit) NI PXIe-8360, PCIe-8361, PCIe-8362 Note: For full EMC compliance, operate this device with shielded cabling. In addition, all covers and filler panels must be installed. Refer to the Declaration of Conformity (DoC) for this product for any additional regulatory compliance information. To obtain the DoC for this product, visit ni.com/certification, search by model number or product line, and click the appropriate link in the Certification column. Relative humidity range.................... 10 to 90%, noncondensing (tested in accordance with IEC-60068-2-56) BUY ONLINE at ni.com or C ALL 800 813 36 93 (U.S.) 3 NI Services and Support your needs around the globe and through PL AN MA IN NI has the services and support to meet IN TA the application life cycle – from planning and development through deployment and SERVICE NEEDS ongoing maintenance. We offer services P DE EL OP and service levels to meet customer LO Y requirements in research, design, validation, V DE and manufacturing. Visit ni.com/services. Local Sales and Technical Support In offices worldwide, our staff is local to the country, giving you access to engineers who speak your language. NI delivers industry-leading technical support through online knowledge bases, our applications engineers, and access to 14,000 measurement and automation professionals within NI Developer Exchange forums. Find immediate answers to your questions at ni.com/support. We also offer service programs that provide automatic upgrades to your application development environment and higher levels of technical support. Training and Certification Visit ni.com/ssp. NI training is the fastest, most certain route to productivity with our products. Hardware Services NI training can shorten your learning curve, save development time, and reduce maintenance costs over the application life cycle. We schedule instructor-led courses in cities worldwide, or we can hold a course at your facility. We also offer a professional certification program that identifies individuals who have high levels of skill and knowledge on using NI products. Visit ni.com/training. System Assurance Programs NI system assurance programs are designed to make it even easier for you to own an NI system. These programs include configuration and deployment services for your NI PXI, CompactRIO, or Compact FieldPoint system. The NI Basic System Assurance Program provides a simple integration test and ensures that your system is delivered completely assembled in one box. When you configure Professional Services your system with the NI Standard System Assurance Program, you can select Our NI Professional Services team is composed of NI applications and systems from available NI system driver sets and application development environments engineers and a worldwide National Instruments Alliance Partner program of to create customized, reorderable software configurations. Your system arrives more than 600 independent consultants and integrators. Services range from fully assembled and tested in one box with your software preinstalled. When start-up assistance to turnkey system you order your system with the standard program, you also receive system- integration. Visit ni.com/alliance. specific documentation including a bill of materials, an integration test report, a recommended maintenance plan, and frequently asked question documents. Finally, the standard program reduces the total cost of owning an NI system OEM Support by providing three years of warranty coverage and calibration service. Use the We offer design-in consulting and product integration assistance if you want to online product advisors at ni.com/advisor to find a system assurance program use our products for OEM applications. For information about special pricing and to meet your needs. services for OEM customers, visit ni.com/oem. Calibration Services NI recognizes the need to maintain properly calibrated devices for highaccuracy measurements. We provide manual calibration procedures, services to recalibrate your products, and automated calibration software specifically designed for use by metrology laboratories. Visit ni.com/calibration. Repair and Extended Warranty NI provides complete repair services for our products. Express repair and advance replacement services are also available. We offer extended warranties to help you meet project life-cycle requirements. Visit ni.com/services. ni.com n 800 813 3693 National Instruments n [email protected] ©2010 National Instruments. All rights reserved. CompactRIO, FieldPoint, MXI, National Instruments, National Instruments Alliance Partner, NI, and ni.com are trademarks of National Instruments. Other product and company names listed are trademarks or trade names of their respective companies. A National Instruments Alliance Partner is a business entity independent from National Instruments and has no agency, partnership, or joint-venture relationship with National Instruments. 1057