KB Indicators Complement to KB Pushbuttons TYPICAL INDICATOR ORDERING EXAMPLE KB 02 K Bushing Mounting Square 02 Round 03 Rectangular CAP TYPES & COLORS Incandescent Lamp used w/Solid Cap Solid Cap: Lens/Filter Colors 05 5-volt BB White/White FB Green/White 12 12-volt CB Red/White FF Green/Green CC Red/Red GB Blue/White EB Yellow/White GG Blue/Blue Snap-in Mounting 04 Square 05 Round 06 Rectangular Incandescent or Neon Lamp used with Insert Cap 05 5-volt 12 12-volt 01 110-volt Neon HOUSING K Insert Cap: Lens/Filter Colors JB Clear/White JC Clear/Red JE Clear/Yellow * JF Clear/Green * JG Clear/Blue * JF & JG not suitable with neon. Black only Bright LED used with Cap for LED Colors Resistor No Code 5C Red TERMINALS W01 Silver Solder Lug 5D Amber 5F Green No Resistor 05 5-volt 12 12-volt 24 24-volt LED Cap: Lens/Diffuser Colors AB Square Spot Illuminated Black Cap/White Window JB Clear/White JC Clear/Red JD Clear/Amber JF Clear/Green Super Bright LED used w/Cap for LED 6B White 6F Green 6G Blue DESCRIPTION FOR TYPICAL ORDERING EXAMPLE KB02KW01-12-FF FF LAMPS SHAPES 01 12 W01 LED Cap: Lens/Diffuser Colors JB Clear/White 12-volt Incandescent Lamp Solid Cap with Green Lens and Green Filter Black Housing Round with Bushing Mounting Silver Solder Lug Terminals NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Complement to KB Pushbuttons KB Indicators SHAPES & MOUNTING TYPES Bushing Mounting 01 .551” (14mm) Square 02 .551” (14mm) Round 03 .551” x .728” (14mm x 18.5mm) Rectangular 06 .551” x .728” (14mm x 18.5mm) Rectangular Snap-in Mounting 04 .551” (14mm) Square 05 .551” (14mm) Round The bezel is an integral part of the indicator body. Panel Cutouts Bushing Mounting Without Keyway (12.3) Dia .484 Snap-in Mounting (1.2) R .047 (1.8) .071 Panel Thickness: .020” ~ .315” (0.5 ~ 8mm) Panel Thickness: .039” ~ .138” (1.0 ~ 3.5mm) With Keyway (4.9) .193 (12.3) Dia .484 (12.3) Dia .484 (6.8) .268 TERMINALS W01 Silver Solder Lug (2.0) .079 (1.0) .039 (5.0) .197 (1.8) .071 Thk = (0.2) .008 LAMP COLORS & SPECIFICATIONS The electrical specifications shown are determined at a basic temperature of 25°C. If the source voltage exceeds the rated voltage,a ballast resistor is required. The ballast resistor calculation and more lamp detail are shown in the Supplement section. Incandescent & Neon Lamps AT611 AT615 Incandescent Neon T-1 Bi-pin 05 12 01 Voltage V 5V AC 12V AC 110V AC Current I 115mA 60mA 1.5mA Endurance Hours 7,000 average Recommended Resistors for Neon: 33K ohms for 110V AC; 100K ohms for 220V AC 10,000 Bright LED without Resistor Red Amber Green 5C 5D 5F Red Amber Green Forward Peak Current IFM 30mA 30mA 30mA Continuous Forward Current IF 20mA 20mA 20mA Forward Voltage VF 1.9V 2.0V 2.1V Reverse Peak Voltage VRM 5V 5V 5V Current Reduction Rate Above 25°C ∆IF 0.42mA/°C 0.29mA/°C 0.42mA/°C AT635 Color Codes LEDs are colored in OFF state. (+) (-) T-11⁄2 Bi-pin Ambient Temperature Range No Code No Resistor –25° ~ +50°C NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 KB Indicators Complement to KB Pushbuttons LAMP COLORS & SPECIFICATIONS The electrical specifications shown are determined at a basic temperature of 25°C. If the source voltage exceeds the rated voltage,a ballast resistor is required. The ballast resistor calculation and more lamp detail are shown in the Supplement section. Bright LED with Resistor AT634 Color Codes: LEDs are colored in OFF state. Amber Green 5C 5D 5F Resistor Codes 05 12 24 Forward Peak Current IFM — — — Continuous Forward Current IF 25mA 20mA 10mA Forward Voltage VF 5V 12V 24V Reverse Peak Voltage VRM 4V 8V 16V Current Reduction Rate Above 25°C ∆IF — — — Ambient Temperature Range T-1 ⁄ Bi-pin 14 AT634 5-volt 2-element with 1 Resistor Red AT634 12-volt (+) 4-element with 2 Resistors (-) (+) –25° ~ +50°C (-) AT634 (+) 24-volt 4-element with 2 Resistors (-) Super Bright Single Element LED Attention AT625G Blue Electrostatic Sensitive Devices AT631B White AT632F Green (+) (-) 6B 6F Color White Green Blue Forward Peak Current IFM 30mA 30mA 30mA Continuous Forward Current IF 20mA 20mA 20mA Forward Voltage VF 3.6V 3.5V 3.6V Reverse Peak Voltage VRM 5V 5V 5V Current Reduction Rate Above 25°C ∆IF 0.50mA/°C 0.50mA/°C 0.50mA/°C Ambient Temperature Range T-1 Bi-pin 6G –25° ~ +50°C CAP TYPES & COLOR COMBINATIONS Color Codes: B White C Red E Yellow F Green G Blue J Clear Solid Cap for Incandescent Lamp Lens/Filter Colors Available: BB FB CB FF CC EB GB GG AT485 Square (11.6) Sq .457 (4.5) .177 (6.2) .244 AT486 Round AT4021 Rectangular (11.6) Dia .457 (4.5) .177 (11.6) .457 (16.1) .634 (4.5) .177 (6.3) .248 (6.2) .244 Material: Polycarbonate Translucent Colored Lens Finish: Glossy Translucent Colored Filter Lamp AT611 NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Complement to KB Pushbuttons KB Indicators CAP TYPES & COLOR COMBINATIONS Color Codes: A Black B White C Red D Amber E Yellow F Green G Blue J Clear Insert Cap for Incandescent or Neon Lamp Lens/Filter Colors Available: JB AT487 Square AT488 Round AT4022 Rectangular Transparent Clear Lens JC JE (4.5) .177 (11.6) Dia .457 (4.5) .177 (6.2) .244 (6.2) .244 (11.6) Sq .457 JF (11.6) .457 (16.1) .634 (4.5) .177 (6.3) .248 Translucent Colored Filter JG JF and JG not suitable with neon lamp. Material: Polycarbonate Finish: Glossy Lamp AT611 Lamp AT615 Bright LED AT635 Bright LED AT634 Spot Illuminated Cap for Bright LED without Resistor or with Resistor Cap/Window Colors Available: AB Opaque Black Cap with Translucent White Window for Spot Illumination (3.0) .118 AT4051 Square (11.6) Sq .457 (4.6) .181 (1.8) .071 (5.0) .197 Material: Polycarbonate (6.2) .244 Finish: Matte Cap for Bright LED without Resistor or LED with Resistor Lens/Diffuser Colors Available: (AT4133, 4132, 4134 white diffusers; AT4158, 4160, 4159 colored diffusers) JB JC JD JF AT4133 AT4132 AT4134 Square Round Rectangular AT4158 AT4160 AT4159 (4.5) .177 (11.6) Dia .457 (4.5) .177 (6.2) .244 (6.2) .244 (11.6) Sq .457 Material: Polycarbonate (11.6) .457 Transparent Clear Lens (16.1) .634 Translucent Diffuser (4.5) .177 (6.3) .248 Finish: Glossy Bright LED AT635 Bright LED AT634 NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Complement to KB Pushbuttons KB Indicators CAP TYPES & COLOR COMBINATIONS Cap for Super Bright LED Lens/Diffuser Colors Available: JB AT4133 Square Clear Lens White Diffuser AT4132 Round AT4134 Rectangular (4.5) .177 (11.6) Dia .457 (4.5) .177 (6.2) .244 (6.2) .244 (11.6) Sq .457 (11.6) .457 Translucent Clear Lens (16.1) .634 (4.5) .177 (6.3) .248 Material: Polycarbonate Translucent White Diffuser Super Bright LEDs AT625, AT631, AT632 Finish: Glossy TYPICAL SWITCH DIMENSIONS Bushing Mount (11.6) .457 (14.0) .551 (16.1) .634 (11.6) Dia .457 (14.0) Dia .551 (18.5) .728 (5.0) .197 (1.0) x (2.0) Typ .039 x .079 M12 P1 (1.8) .071 Keyway (1.8) Typ .071 (11.6) Sq .457 (14.0) Sq .551 KB01KW01-05-GG (14.2) .559 (3.5) .138 (5.3) .209 (1.0) .039 (24.7) .972 (0.2) Typ .008 (5.0) .197 (9.0) .354 Snap-in Mount (11.6) .457 (14.0) .551 (2.3) .090 (16.1) .634 (11.6) Sq .457 (14.0) Sq .551 (18.5) .728 (1.0) x (2.0) Typ .039 x .079 (1.8) .071 Keyway (1.8) Typ .071 (2.3) .090 (11.6) Dia .457 (14.0) Dia .551 (0.2) Typ .008 (1.0) .039 (3.5) .138 (5.3) .209 (24.7) .972 (5.0) .197 (9.0) .354 KB05KW01-05-FF NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07