TGH Series Due to their non-inductive design, these resistors are ideally suited for highfrequency and pulse-load applications. Available in 120or 200-watt sizes, this resistor is designed for direct mounting onto a heatsink. Popular applications include variable speed drives, power supplies, control devices, telecom, robotics, motor controls, and other switching designs. 120 and 200 Watt SOT227Package Thick Film Power 1.501" ±0.004 (38.1mm ±0.1) 0.473" ±0.008 (12.0mm ±0.2) 1.235" ±0.014 (31.35mm ±0.35) 0.315" ±0.008 (8.0mm ±0.2) 0.355" ±0.004 (9.0mm ±0.1) SPECIFICATIONS Material Heat Sink: Nickel-plated copper Contacts: Nickel-plated copper Substrate: Al203 (96%) Molding Compound: High-performance epoxy, compliant to UL94-V0 Terminal Nuts: American standard 303 stainless steel 0.158" (4.0mm) 0.1 0.5 1 5 10 TGHHVR100JE TGHHV1R00JE TGHHV5R00JE TGHHV10R0JE 25 33 50 100 150 TGHHV33R0JE TGHHV50R0JE TGHHV100RJE TGHHV150RJE 500 680 1K 5K 10K TGHHV500RJE TGHHV680RJE TGHHV1K00JE TGHHV5K00JE TGHHV10K0JE 0.032" ±0.002 (0.80mm ±0.05) 0.165" ±0.004 (4.2mm ±0.1) 0.500" ±0.004 (12.7mm ±0.1) 0.980" ±0.021 (24.9mm ±0.5) 0.165" ±0.004 (4.2mm ±0.1) 1 2 M4 0.209" (5.3mm) 0.591" ±0.004 (15.0mm ±0.1) 1.190" ±0.004 (30.2mm ±0.1) 200 Watt TGHL TGHLVR100JE TGHLVR500JE TGHLV1R00JE TGHLV10R0JE TGHLV25R0JE TGHLV33R0JE TGHLV100RJE TGHLV150RJE TGHLV500RJE TGHLV680RJE TGHLV1K00JE TGHLV5K00JE TGHLV10K0JE DERATING CONFIGURATIONS (per package) Type: H L 120 200 100 80 96 160 60 72 120 40 48 80 20 24 40 0 0 0 0 25 50 85 100 125 150 175 Bottom-case Temperature, °C Config. 1 Rated Power, W Heat Resistance to Cooling Plate: Rth <0.35 K/W Capacitance/Mass: 45pF Working Temp. Range: -55°C to +155°C Max. Torque for Base Plate (static): 1.5 Nm Max. Torque for Contacts (static): 1.3 Nm. M4 screws (not included) Derating (thermal resistance): 2.86W/°K (0.35°K/W) S TA N D A R D PA RT N U M B E R S Ohms 120 Watt TGHH 4 Percent Rated Power Electrical Resistance Range: 0.1Ω to 1MΩ Tolerance: ±5% Temperature coefficient: ±250ppm (at +105°C ref. to +25°C) Max. Work.Voltage: 500V (up to 1,000V on special request) Power Rating at 85°C: 120W (see derating) Partial Discharge: up to 2,000Vrms/80 pC Voltage Proof: Dielectric Strength up to 4,000V DC against ground 3 0.079" ±0.002 (2.00mm ±0.05) 1 Config. 2 2 4 1 Best results can be reached by using a thermal transfer compound with a heat conductivity of better than 1W/mK O R D E R I N G I N F O R M AT I O N Configuration V = config. 1 X = config. 2 E = RoHS compliant TGHHV1R00JE SOT 227 Series Wattage Resistance Value Tolerance J = 5% H = 120W Example: L = 200W R500 = 0.500Ω 1R00 = 1Ω 250R = 250Ω 1K00 = 1,000Ω 10K0 = 10,000Ω Check product availability at www.ohmite.com Subscribe to our New Product Bulletin at ohmite.com Ohmite Mfg. Co. 1600 Golf Rd., Rolling Meadows, IL 60008 • 1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • [email protected] 61