OTS-2V4DTR Optiva Standard, 2 Composite Video, and 4 Duplex RS-232/422/485 Data ® Composite Video and Data Transmission The OTS-2V4DTR provides for the digital transmission of 2 Channels of Composite Video and 4 Channels of Duplex Serial Data. Video Audio Data System Design All units come in an insert card version. The cards can be inserted into our 16-slot, 19” rack-mountable card cage (OT-CC-16-100) or one of our smaller Optiva Desktop Card Racks (OT-DTCR Series). The Optiva® Desktop Card Racks can handle one, two or four insert cards, creating compact, mountable, stand alone systems. The use of separate OT-DTCR enclosures allows for future flexibility and expansion as all cards are hot-swappable and can be used in any enclosure. Each one of our card housing units operate with an appropriate power supply. See “Accessories” for power supply specifications. A L E R T S T A T U S ST, LC, SC or FC ST, LC, SC or FC Composite Video In Composite Video Out Composite Video In Composite Video Out A L E R T S T A T U S 4 Serial Data Out/In 4 Serial Data In/Out Optiva™ Optiva™ VAD Transmission VAD Transmission OTS-2VT4DTR OTS-2VR4DRT Each insert card comes with a label identifying the specific protocols handled, connector pin-out and other vital information. For optimal bandwidth allocation, each insert card can daisy-chain with an additional card in the same chassis. See “Optiva™ Upgrade Path”. Features • Composite Video and Serial Data over one fiber • 12-Bit Digital Transmission (Video) Optiva Upgrade Path • TDM - Single fiber, dual wavelength This system can be purchased without an optical port as an add-on to an existing Optiva® system daisy-chain. (See “Non-Optical Version” below). • Complies with SMPTE 259 for uncompressed SDI The Optiva bandwidth requirement of this system is 738 Mbps. • Stand alone or rack-mount ® ® • Compatible with MDM-7000 Series for WDM and CWDM multiplexing • No EMI or RFI and no ground loops • Ideal Professional AV applications Versions Available* Wavelength (nm) & Fiber Transmit/Receive** Receive/Transmit** 1310/1550 Multimode 1310/1550 Singlemode 1310/1550 SM (D) 1310/1550 SM (H) 1270-1610 SM (CWDM) OTS-2VT4DTR-A2/A3M-XX-IC OTS-2VT4DTR-A2/A3-XX-IC OTS-2VT4DTR-A2/A3D-XX-IC OTS-2VT4DTR-A2/A3H-XX-IC OTS-2VT4DTR-L4/L4-XX-IC OTS-2VR4DRT-A3M/A2-XX-IC OTS-2VR4DRT-A3/A2-XX-IC OTS-2VR4DRT-A3D/A2-XX-IC OTS-2VR4DRT-A3H/A2-XX-IC OTS-2VR4DRT-L4/L4-XX-IC Non-Optical Version OTS-2VT4DTR-NOC-IC OTS-2VR4DRT-NOC-IC Optical Connector Optical Budget (dB) Range*** (km) Form Factor ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC ST, FC, LC or SC 10 12 17 25 Varies 3 20 40 60 20-70 IC (1-slot) IC (1-slot) IC (1-slot) IC (1-slot) IC (1-slot) N/A N/A N/A IC (1-slot) Serial Data Codes - "D" indicates RS-232. For other Serial Data preferences, please use: "DJ" = RS-422; "DK" = RS-485 (2W); and "DW" = RS-485 (4W). * Contact Opticomm for other versions available. ** XX indicates the type of optical connector. Each of ST, FC, LC or SC are available. *** Chromatic dispersion and additional losses should be taken into account. 800-867-8426 • [email protected] • www.opticomm.com • Contact Opticomm for custom requirements. Opticomm reserves the right to change specifications without notice Composite Video, Audio & Data Video Standard Bit Resolution Level Bandwidth Differential Gain Differential Phase Passband Ripple Chroma/Luma Delay Compatibility Signal to Noise Ratio Connector Data RS-232, RS-422 RS-485 (2 Wire) RS-485 (4 Wire) Data Rate Connector Contact Closure Connector General Dimensions & Weight Storage temperature Humidity Operating voltage Consumption System Latency Local Monitoring Remote Monitoring Sample Configuration Optiva™™Configurable Multi-Signal Optiva Transmission Platform Communication Platform SMPTE 170M; RS-250C (Short Haul) 12-Bit Digital Transmission 1.0 Volt p-p 5.5 MHz < 2% < 0.7° < ±0.2 dB to 5.5 MHz <12ns NTSC, PAL, SECAM > 67 dB BNC (IEC 60169-8) Network Management Management Network SDI HD-SDI SDIand & HD-SDI Composite Video, Video, Composite Audio & & Data Data Audio Audio/FSK/Intercom RGB/VGA/DVI RGB/VGA/DVI Audio/FSK/Intercom Data (Ethernet/Serial/USB) (Ethernet/Serial/USB) Data CATV/RF & & L-Band L-Band CATV/RF Optical Switching, Switching, Routing Routing Optical & Redundancy & Redundancy Passive Multiplexing Multiplexing Passive Solutions Solutions DC to 1 Mbps Micro DB25 Enclosures, Racks Racks Enclosures, & Frames Frames & Micro DB25 Insert Card (IC): 6.3” L x 0.8” W x 4.0” H Operating temperature -20° C to +55° C -40° C to +85° C 0 to 95% non-condensing 9-12 VDC 11 oz Power Supplies Supplies Power and Accessories & Accessories < 7w per insert card Less than 1ms LED Status Indication Compatible with OptivaView™ SNMP Management Suite MADE IN THE USA