OPTICOMM OTS-8A

OTS-8A
Optiva Standard, 8 Analog Audio
™
Analog Audio Transmission
The OTS-8A provides for the transmission
of 8 Channels of Analog Audio.
ST, LC,
SC or FC
ST, LC,
SC or FC
Audio
In
Audio
Out
System Design
Video
Audio
Data
All units come in an insert card version.
The cards can be inserted into our 16-slot,
19” rack-mountable card cage (OT-CC-16-100)
or one of our smaller Optiva™ Desktop
Card Racks (OT-DTCR Series).
The Optiva™ Desktop Card Racks can handle
one, two or four insert cards, creating
compact, mountable, stand alone systems.
The use of separate OT-DTCR enclosures
allows for future flexibility and expansion as
all cards are hot-swappable and can be used
in any enclosure. Each one of our card
housing units operate with an appropriate
power supply. See “Accessories” for power
supply specifications.
Optiva™
A
L
E
R
T
S
T
A
T
U
S
A
L
E
R
T
S
T
A
T
U
S
A
L
E
R
T
S
T
A
T
U
S
Audio
In
A
L
E
R
T
S
T
A
T
U
S
Audio
Out
Optiv
a™
Optiv
a™
Optiv
a™
Optiv
a™
VAD Transmission
VAD Transmission
VAD Transmission
VAD Transmission
OTS-8AT
OTS-8AR
Features
• Analog Audio over one fiber
• TDM - Single Wavelength
Upgrade Path
This system can be purchased without
an optical port as an add-on to an existing
Optiva™ system daisy-chain.
(See “Non-Optical Version” below).
Optiva™
bandwidth requirement
The
of this system is 40 Mbps.
• Compatible with MDM-7000 Series for WDM and CWDM
multiplexing
• No EMI or RFI and no ground loops
• Stand alone or rack-mount
• Ideal for Professional AV applications
Versions Available*
Wavelength (nm)
& Fiber
Transmit**
Receive**
Optical
Connector
Optical Budget
(dB)
Range***
(km)
Form Factor
1310 Multimode
1310 Singlemode
1310 Singlemode (D)
1550 Singlemode
1550 Singlemode (D)
1270-1610 SM (CWDM)
OTS-8AT-A1-XX-IC
OTS-8AT-A2-XX-IC
OTS-8AT-A2D-XX-IC
OTS-8AT-A3-XX-IC
OTS-8AT-A3D-XX-IC
OTS-8AT-L4-XX-IC
OTS-8AR-A1-XX-IC
OTS-8AR-A2-XX-IC
OTS-8AR-A2D-XX-IC
OTS-8AR-A3-XX-IC
OTS-8AR-A3D-XX-IC
OTS-8AR-L4-XX-IC
ST, FC, LC or SC
ST, FC, LC or SC
ST, FC, LC or SC
ST, FC, LC or SC
ST, FC, LC or SC
ST, FC, LC or SC
10
7
12
17
25
Varies
3
10
20
40
60
20-70
IC (1-slot)
IC (1-slot)
IC (1-slot)
IC (1-slot)
IC (1-slot)
IC (1-slot)
Non-Optical Version
OTS-8AT-NOC-IC
OTS-8AR-NOC-IC
N/A
N/A
N/A
IC (1-slot)
Analog Audio Codes - To indicate your Analog Audio impedance preference, please use the following instead of "A" in the model number: "AB" = Input Balanced 600 Ohm, Output Balanced 600 Ohm;
"ABH" = Input Balanced Hi-Z, Output Balanced Low-Z; and "AUH" = Input Unbalanced Hi-Z, Output Unbalanced Low-Z.
* Contact Opticomm for other versions available.
** XX indicates the type of optical connector. Each of ST, FC, LC or SC are available.
*** Chromatic dispersion and additional losses should be taken into account.
800-867-8426 • [email protected] • www.opticomm.com • Contact Opticomm for custom requirements.
Opticomm reserves the right to change specifications without notice
Audio/FSK/Intercom
Analog Audio
Level
Bandwidth
Signal to Noise Ratio
Total Harmonic Distortion
Signal Coding
Connector
General
Dimensions & Weight
Operating temperature
Storage temperature
Humidity
Operating voltage
Consumption
System Latency
Local Monitoring
Remote Monitoring
6 dBm In/Out
20 Hz to 20 KHz
> 80 dB
< 0.1%
24-bit
Micro DB25
Impedance Options:
Input
Balanced 600 Ohm
Balanced Hi-Z
Unbalanced Hi-Z
Insert Card (IC): 6.3” L x 0.8” W x 4.0” H
-20° C to +55° C
-40° C to +85° C
0 to 95% non-condensing
9-12 VDC
1 Amp Max per Insert Card
Less than 10ms
LED Status Indication
Compatible with OptivaView™
SNMP Management Suite
Output
Balanced 600 Ohm
Balanced Low-Z
Unbalanced Low-Z
Optiva™ Configurable
Communication Platform
Network Management
SDI & HD-SDI
Composite Video,
Audio & Data
11 oz
RGB/VGA/DVI
Audio/FSK/Intercom
Data (Ethernet/Serial/USB)
CATV/RF & L-Band
Optical Switching, Routing
& Redundancy
Passive Multiplexing
Solutions
Enclosures, Racks
& Frames
Power Supplies
& Accessories
MADE IN THE USA
Sample Configuration