RGB-4006-A/B/C Single Fiber RGB/VGA, Stereo Audio Duplex Data & Keyboard/Mouse Digital VGA/RGB Video For Ultra-High Resolution Remote Display The RGB-4006 is a single-fiber, LED or Laser-based VGA-H/V RGB/Video with Keyboard & Mouse, stereo Audio and Data digitally transmitted over one fiber. It boosts performance with precise color management, reduced fiber handling and selfconfiguration. It is ideal for the extension of any high resolution Video signal such as a CAD/CAM graphics workstation, plasma display screens, LCD/DLP projectors, military C3 and C41 systems, theaters and stadiums. The RGB-4006 simplifies cabling infrastructures and has LEDs for Power, Optical link, Video activity, Signal error, System status, Monitor detection, Mouse detection, Keyboard detection & Optical signal present. RGB-4006 Options Features • Digital VGA/Video High resolution RGB/Video • Multimode or singlemode operation over single fiber, reducing fiber handling from 5-to-1 fiber • Distance of 1.0 km over multimode and 65 km over singlemode • RGB-4006A 1280 x 1024 x 75Hz 1.25Gb/s • RGB-4006B 1600 x 1200 x 75Hz 2.30Gb/s • Self-configuring, precision color transmission • RGB-4006C 1800 x 1440 x 75Hz 3.11Gb/s • True DC restoration with AGC System Design • Flat frequency response Sync on green, separate HS/VS, or composite. All units come as a Stand Alone version. Units can be rack-mountable with optionally provided brackets for a flat surface such as a desk top in a cabinet, or mounted in a 19” Rack Shelving. RGB-4004 unit comes with external 8-24 VDC power supply. • Complies with RS-170, RS-170A & RS-343 EIA standards 1310 • No EMI or RFI and no ground loops • Stand Alone or Mounting Brackets Receiver Sensitivity Optical Budget Loss Range* Conn Type Mode Laser MM L1 50 /125µ -8 dBm -22 dBm 14 dB 1 km ST Laser MM L1 62.5/125µ -8 dBm -24 dBm 16 dB 2 km ST Laser SM L2 09/125µ -4 dBm -22 dBm 18 dB 25 km FC Laser SM L4 09/125µ 0 dBm -20 dBm 20 dB 40-65 km FC 1550 1270-1610 Type Fiber Type Output Power Wavelength Suffix (CWDM) • • • • * Chromatic dispersion and additional losses should be taken into account. 800-867-8426 • [email protected] • www.opticomm.com • Contact Opticomm for custom requirements. RGB/VGA/DVI Hi-Res Video Transmission Video Video in/out impedance Video in/out level Video bandwidth Grayscale linearity distortion Pixel intensity distortion Linearity Tilt Maximum horizontal frequency Maximum refresh rate Signal to noise ratio Connector type Analog RGB Format 75 Ohm .7 volt peak to peak, 1 volt with sync 10 Hz to 300 MHz @ -3dB < 1.0 % typical < 2.0 % typical ± 1.1 % typical < 0.5 % typical 93.8 KHz 1280 x 1024 (option A), 1600 x 1200 (option B) 1800 x 1440 (option C) @ 75 Hz >52 dB using RS-250C standards @ 500 meters HD15 Pin female Audio Channels Audio in/out impedance Audio in/out level Frequency response Signal to noise ratio Total harmonic distortion Connector type 1 stereo @ 24 bits 600Ω or 47kΩ - balanced or unbalanced -6 to +6 dBm 10 Hz to 20 KHz @ -3dB > 90 dB @ 1 kHz (weighted) < 1.0 %, 1 KHz at maximum modulation Phone Jack Data RS-232 Keyboard/Mouse 19.2 Kb/s DB9 Pin Male Mini-DIN 6 pin General Dimensions Material Operating temperature Storage temperature Humidity Operating voltage 1RU Rack Mount: 19” L X 7.25” W X 1.75” H Aluminum casing -20° C to +70° C -30° C to +85° C 0 to 95% non-condensing 85-265 VAC50/60 Hz @ 100 mA Diagnostics Status monitoring LED indicators Emissions: FCC Part 15, ICES-003, AS/NZS, 3548, EN55022 Immunity: ENVS0204, EN61000-4-2,3,4,5,6,11 Safety: UL1950, CAN/CSA 22.2, NO.950-95 MADE IN THE USA Sample Configuration 1 Fiber RGB-4006/XMT RGB-4006/RCV