Oscilent Corporation | 774 Series Ceramic Filter Page 1 of 2 Filters Series Number Package Description Last Modified 774 Ceramic Series High Selectivity Type Jan. 01 2007 Filter FEATURES - High Selectrivity Ceramic Filter - for TV / VCR Stage - RoHS Compliant OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS / PART NUMBER GUIDE Nominal Frequency 3 dB Bandwidth 20 dB Bandwidth Insertion Loss Spurious Attenuation In/Output Impedance (fn)(MHz) (KHz) min. (KHz) max. 4.500 fn ±40 370 (dB) max. (dB) min. (Ohm) 10.0 40 (4.05+0.8/-1 MHz) LTT/A 4.724 fn ±40 1000 370 10.0 40 (4.72+0.8/-1 MHz) 774-5.5M LTT/A 5.500 1000 fn ±50 350 9.0 50 (5.50 ±1 MHz) 600 774-5.742M LTT/A 774-6.0M LTT/A 5.742 fn ±50 350 9.0 50 (5.74 ±1 MHz) 600 6.000 fn ±50 400 9.0 50 (6.00 ±1 MHz) 774-6.25M 470 LTT/A 6.250 fn ±50 400 9.0 50 (6.25 ±1 MHz) 470 774-6.5M LTT/A 6.500 fn ±50 400 9.0 50 (6.50 ±1 MHz) 470 774-6.742M LTT/A 6.742 fn ±50 400 9.0 50 (6.74 ±1 MHz) 470 PART NO. Type 774-4.5M LTT/A 774-4.724M NOTE: Deviations on all parameters available. Please consult Oscilent for details. DEFINITIONS: Click on the characteristic names above, for definitions of the particular characteristic. . Oscilent Corporation - CALL 949.252.0522 18195 East McDurmott Street . Building D . Irvine . CA 92614 . USA Fax: 949.252.0599 . E-Mail: [email protected] Series No.: 774 Oscilent Corporation | 774 Series Ceramic Filter Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map Page 2 of 2