Oscilent Corporation IF SAW Filter | 820-IF70.0M-HR Page 1 of 2 IF SAW Filter Part Number Package Application Last Modified 820-IF70.0M-HR 20.2 x 12.6 Thru Hole Base Station & Repeater May 30 2003 . TYPE : 70.0 MHz Bandpass Filter 19.5 MHz Bandwidth PART NUMBER : 820-IF70.0M-HR . Horizontal : 5.0 MHz/Div Veritical : 10 dB/Div Horizontal : 3.0 MHz/Div Veritical : 1 dB/Div Veritical : 100 ns/Div . OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Minimum Typical Maximum Units 69.94 70.00 70.06 MHz Insertion Loss - 24.0 26.0 dB 1dB Bandwidth 19.00 19.15 - MHz 3dB Bandwidth 19.50 19.60 - MHz 40dB Bandwidth - 21.45 21.70 MHz Passband Ripple - 0.8 1.0 dB Group Delay Variation - 30 80 nsec Center Frequency - 1.98 - µsec Ultimate Rejection 50 55 - dB Substrate Material - LN - - Ambient Temperature - 25 - °C Absolute Delay * Custom SAW IF Filters available. Contact Oscilent for assistance. . PACKAGE OUTLINE (mm) TEST FIXTURE http://www.oscilent.com/spec_pages/if_sawfilter/if_820_if70_0hr.htm 12/28/2005 Oscilent Corporation IF SAW Filter | 820-IF70.0M-HR Page 2 of 2 L1 = 150nH C1 = 0pF L2 = 220nH C2 = 43pF Source/Load Impedance = 50 ohms Part No.: 820-IF70.0M-HR Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map http://www.oscilent.com/spec_pages/if_sawfilter/if_820_if70_0hr.htm 12/28/2005