Oscilent Corporation IF SAW Filter | 835-IF120.0M-B Page 1 of 2 IF SAW Filter Part Number Package Application Last Modified 835-IF120.0M-B 35.0 x 12.0 Thru Hole Base Station & Repeater May 30 2003 . TYPE : 120.0 MHz Bandpass Filter 26.1 MHz Bandwidth PART NUMBER : 835-IF120.0M-B .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Minimum Typical Maximum Units 119.9 120.0 120.1 MHz Insertion Loss - 23.0 25.0 dB 1dB Bandwidth 25.5 25.65 - MHz 3dB Bandwidth 26.1 26.25 - MHz 40dB Bandwidth - 28.70 28.9 MHz Passband Ripple - 0.70 1.0 dB Group Delay Variation - 35 80 nsec Absolute Delay - 1.52 - µsec dB Center Frequency Ultimate Rejection 50 55 - Substrate Material - 128 Degree LN - - Ambient Temperature - 25 - °C * Custom SAW IF Filters available. Contact Oscilent for assistance. . PACKAGE OUTLINE TEST FIXTURE (mm) L1 = 39nH L2 = 27nH C2 = 15pF Source/Load Impedance = 50 ohms * PKG ground required for excellent spurious levels Part No.: http://www.oscilent.com/spec_pages/if_sawfilter/if_835_if120_0b.htm 835-IF120.0M-B 12/28/2005 Oscilent Corporation IF SAW Filter | 835-IF120.0M-B Page 2 of 2 Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map http://www.oscilent.com/spec_pages/if_sawfilter/if_835_if120_0b.htm 12/28/2005