IF SAW Filter Part Number Package Application Last Modified 835-IF160.0M-L 35 x 12.8mm Base Station & Repeater Apr 18, 2007 . TYPE : 140.0 MHz Bandpass Filter Through Hole Package PART NUMBER : 835-IF160.0M-L .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Minimum Typical Maximum Units 159.9 160.0 160.1 MHz - 30.4 31.5 dB Operating Temperature Range -30 - +70 °C Storage Temperature Range -40 - +85 °C Source Impedance (single ended)* - 50 - ohm Load Impedance (single ended)* - 50 - ohm Bandwidth at -1.5 dB 13.9 14.12 - MHz Bandwidth at -3.0 dB 14.1 14.29 - MHz MHz Center Frequency Insertion Loss at Fo - 15.38 15.6 50 55 - dB Amplitude Ripple (Fo +/-6.875MHz) - 0.65 1.0 dBp-p Group Delay Variation (Fo +/6.875MHz) - 50 100 nsec Absolute Delay at Fo - 3.52 - µsec Temperature Coefficient - -20 - ppm/°C Bandwidth at -40.0 dB Ultimate Rejection *With Matching Network (Reference Testing Environment Circuit as shown) Modifiy Impedance Values as necessary. . PACKAGE OUTLINE (mm) TEST FIXTURE FREQUENCY RESPONSE Part No.: Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map 835-IF160.0M-L