Oscilent Corporation IF SAW Filter | 835-IF80.0M-B Page 1 of 2 IF SAW Filter Part Number Package Application Last Modified 835-IF80.0M-B 35.0 x 12.8 Thru Hole Base Station & Repeater Jan. 01, 2007 TYPE : 80.0 MHz Bandpass Filter 25.0 MHz Bandwidth PART NUMBER : 835-IF80.0M-B FREQUENCY CHARACTERISTICS OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Minimum Typical Maximum Units MHz 79.90 80.0 80.10 Insertion Loss - 25.0 27.0 dB 1dB Bandwidth 25.0 25.1 - MHz 3dB Bandwidth 25.35 25.42 - MHz 50dB Bandwidth - 26.72 26.90 MHz Passband Ripple - 0.7 1.0 dB Group Delay Variation - 40 100 nsec Center Frequency Ultimate Rejection 50 55 - dB Substrate Material - LN - - Absolute Delay - 2.44 - usec Ambient Temperature - 25 - °C * Custom SAW IF Filters available. Contact Oscilent for assistance. PACKAGE OUTLINE TEST FIXTURE L1 = (120+27)nH C1 = 33pF Oscilent Corporation IF SAW Filter | 835-IF80.0M-B Page 2 of 2 L2 = 120nH C2 = 30pF Source/Load Impedance = 50 ohms Part No.: Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map 835-IF80.0M-B