FSM101 thru FSM107 SURFACE MOUNT FAST RECOVERY GLASS PASSIVATED RECTIFIERS DO-213AB / MELF SOLDERABLE ENDS CATHODE BAND D1= 0.105(2.67) 0.095(2.41) D2 0.022(0.559) 0.016(0.406) 0.205(5.20) 0.185(4.70) D2=D1 +0 -0.008(0.20) Dimension in inches (millimeters ) FEATURES MECHANICAL DATA Ldeal for surface mounted applications Easy pick and place Low leakage current Glass passivated chips Fast switching Metallurgically bonded construction High temperature soldering guaranteed 250oC/10 seconds/.375 , (9.5mm) lead lengths Case Molded plastic use UL94V-0 recoqnized flame retardant epoxy Terminals Plated terminals, solderable per MIL-STD-202, Method 208 Polarity Red Color band on body denotes cathode Mounting position Any Weight 0.12gram MAXIMUM RATIXGS AND ELECTRICAL CHARACTERISTICS Ratings at 25oC ambient temp. unless otherwise specified Single phase, half sine wave, 60Hz, resistive or inductive load For capacitive load, derate current by 20% SYMBOL FSM101 FSM102 FSM103 FSM104 FSM105 FSM106 FSM107 UNITS Maximum Current Peak Reverse Voltage VRRM Maximum RMS Voltage VRMS Maximum DC Blocking Voltage VDC Maximum Average Forward Rectified Current TT=600C I(AV) 1.0 Amps Peak Forward Surge Current Single Sine-Wave on Rated Load (JEDEC Method) IFSM 30 Amps Maximum Instantaneous Forward Voltage Drop at 1.0A DC VF 1.3 Volts Maximum DC Reverse Current TA=250C at Rated DC Blocking Voltage TA=1250C IR 5.0 100 A Maximum Reverse Recovery Time TRR Typical Junction Capacitance CJ 15 Operating Junction Temperature Range TJ -65 to +150 0 TSTG -65 to +150 0 Storage Temperature Range www.paceleader.tw 200 400 600 800 35 70 140 280 420 560 700 Volts 50 100 200 400 600 800 1000 Volts 150 NOTES 1. Reverse Recovery Test Conditions IF=0.5A, I R=1.0A, I RR=0.25A 2. Measured at 1 MHz and Applied Reverse Voltage of 4.0 Volts D.C 1 1000 100 50 250 500 Volts nS pF C C FSM101 thru FSM107 SURFACE MOUNT FAST RECOVERY GLASS PASSIVATED RECTIFIERS RATING AND CHARACTERISTICS CURVES FSM101 THRU FSM107 www.paceleader.tw 2