S2A thru S2M SURFACE MOUNT STANDARD RECOVERY RECTIFIER VOLTAGE - 50 TO 1000 VOLTS CURRENT - 2.0 AMPERES SMA/DO-214AC .055(1.40) .062(1.60) .098(2.50) .114(2.90) .157(4.00) .181(4.60) .006(.152) .012(.305) .078(2.00) .096(2.44) .030(0.76) .060(1.52) .004(.102) .008(.203) .188(4.80) .208(5.28) Dimensions in inches and (millimeters) FEATURES MECHANICAL DATA For surface mount applications Glass passivated junction Low profile package Built-in strain relief Easy pick and place Low forward voltage drop Plastic package has Underwriters Laboratory Flammability Classification 94V-0 High temperature soldering 250oC/10 seconds at terminsls Case JEDEC DO-214AC molded plastic Terminals Solder plated, solderable per MIL-STD-202, Method 208 Polarity Color band denotes cathode end Standard Package 12mm tape (EIA STD EIA-481) Weight 0.002 ounce, 0.064gram MAXIMUM RATIXGS AND ELECTRICAL CHARACTERISTICS Ratings at 25oC ambient temperature unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load For capacitive load, derate current by 20% UNITS SYMBOL S2A S2B S2D S2G S2J S2K S2M Maximum Repetitive Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 0 Volts Maximum Average Forward Rectified Current at TL =100 C I(AV) 2.0 Amps Peak Forward Surge Current 8.3mm Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) IFSM 50 Amps Maximum Instantaneous Forward Voltage at 2.0A VF 1.1 Volts Maximum DC Reverse Current TA=25 C at Rated DC Blocking Voltage TA=1250C IR 5 125 A Typical Junction Capacitance (NOTE 1) CJ 30 0 Maximum Thermal Resistance (NOTE 2) R R Operating and Storage Temperature Range TJ TSTG 53 16 JA JL -55 to +150 pF 0 C/W 0 NOTES 1. Measured at 1.0 MHz and applied reverse voltage of 4.0 volts 2. The thermal resistance from junction to ambient and junction to lead P.C.B. mounted on 0.27x0.27 (7.0x7.0mm) copper pad areas www.paceleader.tw 1 C S2A thru S2M SURFACE MOUNT STANDARD RECOVERY RECTIFIER RATINGS AND CHARACTERISTIC CURVES S2A THRU S2M Fig. 2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT, (A) AVERAGE FORWARD RECTIFIED CURRENT AMPERES Fig. 1 - FORWARD CURRENT DERATING CURVE 2.4 2.0 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INOUCTIVE LOAD P.C.B MOUNTED ON 0.3x0.3"(8.0x8.0mm) COPPER PAD AREAS 1.6 1.2 0.8 0.4 0 20 0 40 60 80 100 120 140 160 LEAD TEMPERATURE, 0C 60 50 40 30 20 o 10 TA = 55 C Single Sine-Wave JEDEC Method 5 1.0 2.0 INSTANTANEOUS REVERSE CURRENT MICROAMPERES 0 TJ=125C 1 0 TJ=75C 0 TJ=25C 0.001 20 40 60 80 20 40 60 100 100 120 140 PERCENT OF PEAK REVERSE VOLTAGE, % 100 50 20 10 5 2 1 0.5 0.2 0.1 0.05 0.02 0.01 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 2 INSTANTANEOUS FORWARD VOLTAGE, (V) Fig. 5 - TRANSIENT THERMAL IMPEDANCE Fig. 6 - TYPICAL JUNCTION CAPACITANCE THERMAL IMPEDANCE ( 0C/W ) INSTANTANEOUS REVERSE CURRENT, (mA) 10 0 10 Fig. 4 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 100 0.01 4.0 6.0 NUMBER OF CYCLES AT 60 Hz Fig. 3 - TYPICAL REVERSE CHARACTERISTICS 0.1 10 CYCLE 100 1,000 200 100 Units Mounted on 2 20in2(5.4mm)+0.5m il inches (0.013mm) Thick Copper Land Areas 50 CAPACITANCE, pF 500 50 20 10 5 2 1 0.01 0.1 1 10 10 5 2 0.1 1 10 REVERSE VOLTAGE, (V) HEATING TIME (SEC) www.paceleader.tw 20 1 0.01 100 0 TJ=25C f=1.0MHz Vsig=50m Vp-p 2 100