SM4001 thru SM4007 SURFACE MOUNT GLASS PASSIVATED SILICON RECTIFIERS DO-213AB / MELF SOLDERABLE ENDS D1= 0.105(2.67) CATHODE BAND 0.095(2.41) D2 0.022(0.559) 0.016(0.406) 0.205(5.20) 0.185(4.70) D2=D1 +0 -0.008(0.20) Dimension in inches (millimeters ) FEATURES MECHANICAL DATA Ldeal for surface mounted applications Easy pick and place Low leakage current Glass passivated chips Metallurgically bonded construction High temperature soldering guaranteed 250oC/10 seconds/.375 , (9.5mm) lead lengths Case Molded plastic use UL94V-0 recoqnized flame retardant epoxy Terminals Plated terminals, solderable per MIL-STD-202, Method208 Polarity Red Color band on body denotes cathode Mounting position Any Weight 0.12gram MAXIMUM RATIXGS AND ELECTRICAL CHARACTERISTICS Ratings at 25oC ambient temperature unless otherwise specified Single phase, half sine wave, 60Hz, resistive or inductive load For capacitive load, derate current by 20% SYMBOL SM4001 SM4002 SM4003 SM4004 SM4005 SM4006 SM4007 UNITS Maximum Current Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 Maximum Average Forward Rectified Current@TT=750C I(AV) 1.0 Amps Peak Forward Surge Current, 8.3ms Single Half Sine-Wave Superimposed on Rated Load (JEDEC Method) IFSM 30 Amps Maximum Instantaneous Forward Voltage at 1.0A VF 1.1 Volts Maximum DC Reverse Current @TA=25 C at Rated DC Blocking Voltage @TA=1250C IR 5.0 100 A Typical Junction Capacitance (Note 1) CJ 9 0 Typical Thermal Rseistance (Note 2) R Operating and Storage Temperature Range TJ, TSTG TSTG www.paceleader.com.tw 50 JC -65 to +150 1 Volts pF 0 C/W 0 C SM4001 thru SM4007 SURFACE MOUNT GLASS PASSIVATED SILICON RECTIFIERS RATINGS AND CHARACTERISTIC CURVES SM4001 THRU SM4007 www.paceleader.com.tw 2