PJSLC054, 054C SERIES LOW CAPACITANCE SINGLE TVS 350W FOR HIGH SPEED DATA LINES PRELIMINARY This Transient Voltage Suppressor is intended to Protect Sensitive Equipment against Electrostatic Discharge and Transient Events as well to offer a Miminum insertion loss in high speed data communication transmission line ports used in Portable Consumer, Computing and Networking Applications. SOT143 SPECIFICATION FEATURES 3 Working Peak Reverse Voltage Range 5, 12, 15 and 24V Max Power Dissipation of 350W, 8/20µs Maximum Leakage Current of 2µA IEC61000-4-2 Compliance 15kV Air, 8kV Contact Discharge Typical capacitance of 7pF (Unidirectional), 5pF (Bi-directional) at 0Vdc Unidirectional and Bi-directional versions available 100% Tin Matte lead finish (RoHS Compliant) 4 2 1 Unidirectional APPLICATIONS Mobile Phones and accessories Universal Serial Bus (USB1.1 and 2.0) Applications Portable Consumer Electronics Instrumentation Equipment Video I/O Ports Bi-directional MAXIMUM RATINGS Symbol Value Units Ppp 350 W V ESD >25 kV Operating Temperature Range TJ -55 to +150 °C Storage Temperature Range Tstg -55 to +150 °C Lead Soldering Temperature (max 10 s) TL 260 °C Rating Peak Pulse Power 8/20µs Waveform ESD Voltage (HBM) ELECTRICAL CHARACTERISTICS Tj = 25°C PJSLC054, PJSLC054C Parameter Reverse Stand-Off Voltage Conditions Symbol Min Typical VWRM Max Units 5 V 6 V Reverse Breakdown Voltage VBR I BR = 1mA Reverse Leakage Current IR VR = 5V 2 µA Clamping Voltage (8/20µs) Vc I pp = 5A 10 V Clamping Voltage (8/20µs) Vc I pp = 17A 18.3 V Maximum Peak Pulse Current I pp 24 A Off State Junction Capacitance Cj 8/20 µs Waveform 0 Vdc Bias f = 1MHz Between pins 1,4 and 2,3 7 (5)* pF * Note: Cj values - Unidirectional (Bi-directional) 7/26/2006 Page 1 www.panjit.com PJSLC054, 054C SERIES ELECTRICAL CHARACTERISTICS Tj = 25°C PJSLC124, PJSLC124C PRELIMINARY Parameter Reverse Stand-Off Voltage Symbol Conditions Min Typical VWRM Reverse Breakdown Voltage VBR I BR = 1mA Reverse Leakage Current IR VR = 12V Clamping Voltage (8/20µs) Vc Clamping Voltage (8/20µs) Max Units 12 V 13.3 V 2 µA I pp = 5A 18 V Vc I pp = 15A 22 V Maximum Peak Pulse Current I pp 8/20 µs Waveform 17 A Off State Junction Capacitance Cj 0 Vdc Bias f = 1MHz Between pins 1,4 and 2,3 Symbol Conditions pF 7 (5)* PJSLC154, PJSLC154C Parameter Reverse Stand-Off Voltage Min Typical VWRM Reverse Breakdown Voltage VBR I BR = 1mA Reverse Leakage Current IR VR = 15V Clamping Voltage (8/20µs) Vc Clamping Voltage (8/20µs) Max Units 15 V 16.7 V 2 µA I pp = 5A 24 V Vc I pp = 12A 28 V Maximum Peak Pulse Current I pp 8/20 µs Waveform 15 A Off State Junction Capacitance Cj 0 Vdc Bias f = 1MHz Between pins 1,4 and 2,3 pF 7 (5)* PJSLC244, PJSLC244C Parameter Reverse Stand-Off Voltage Symbol Conditions Min Typical VWRM Reverse Breakdown Voltage VBR I BR = 1mA Reverse Leakage Current IR VR = 24V Clamping Voltage (8/20µs) Vc Clamping Voltage (8/20µs) Max Units 24 V 26.7 V 2 µA I pp = 5A 36 V Vc I pp = 8A 43 V Maximum Peak Pulse Current I pp 8/20 µs Waveform 10 A Off State Junction Capacitance Cj 0 Vdc Bias f = 1MHz Between pins 1,4 and 2,3 7 (5)* pF * Note: Cj values - Unidirectional (Bi-directional) 7/26/2006 Page 2 www.panjit.com PJSLC054, 054C SERIES TYPICAL CHARACTERISTIC CURVES 110 16 100 90 14 80 Percent of Ipp Ipp, Amps 18 12 10 Pending 8 6 4 50% of Ipp @ 20µs 70 60 50 40 30 Rise time 10-90% - 8µs 20 10 2 0 0 6 8 10 12 14 16 18 20 22 24 0 5 10 Clamping Voltage, V 15 time, µsec 20 25 30 125 150 Pow er Derating Curve Non-Re petitive Pe a k Pulse Pow e r vs Pulse Time 110 10 % of Rated Power or Ipp 100 Peak Pulse Power - Ppp (kW) PRELIMINARY Pulse Waveform Clamping Voltage vs Ipp 8x20µsec 1 Pending 0.1 90 80 70 60 Pending 50 40 30 20 10 0 0.01 0.1 1 10 100 1000 7/26/2006 0 25 50 75 100 Ambient Temperature - TA, °C Pulse Dura tion, µse c Page 3 www.panjit.com PJSLC054, 054C SERIES PACKAGE AND SUGGESTED PAD LAYOUT DIMENSIONS PRELIMINARY © Copyright PanJit International, Inc 2006 The information presented in this document is believed to be accurate and reliable. The specifications and information herein are subject to change without notice. Pan Jit makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose. Pan Jit products are not authorized for use in life support devices or systems. Pan Jit does not convey any license under its patent rights or rights of others. 7/26/2006 Page 4 www.panjit.com