Bandpass Filter ELECTRONICS INC. EPB5162G & EPB5162G-RC • Trans-Am Downstream Bandpass Filter • Robust construction allows for IR/VP processes • Add “-RC” after part number for RoHS Coompliant • Operating Temperature : 0°C to 70°C Electrical Parameters @ 25° C Cut-Off Frequency (MHz) Insertion Loss (dB Max.) Return Loss (dB Min.) Attenuation (dB Min.) Group Delay (nS Max.) Lower Band Upper Band 30-50 MHz 30-50 MHz DC to 5 MHz @ 10 MHz @ 80 MHz 125-500 MHz 30-50 MHz 20 60 -1 -15 -25 -15 -35 -40 8 • Filter Characteristic Impedance : 75 Ω • Maximum Amplitude Variation : ± 0.25 dB @ 30-50 MHz • Package Schematic .750 (19.05) .085 (2.16) .100 (2.54) .075 (1.91) PCA EPB5162G(-RC) Date Code Pin 1 I.D. .450 (11.43) .270 (6.86) Pad Layout .600 (15.24) 7 BPF 2, 3, 4, 5, 6, 8, 9, 10, 11, 12, 13, 14 .030 (.762) .010/.020 (.254/.508) .100 (2.54) .008/.012 (.203/.305) 0°-8° .200 (5.08) .016/.020 (.406/.508) 1 0.004 (.100) Coplanarity .040 (1.02) .400 (10.16) Notes : 1. Lead Finish EPB5162G EPB5162G-RC SnPb Hot Dipped Sn 2. Peak Temperature Rating 225°C 3. Moisture Sensitive Levels MSL = 3 (168 Hours, ≤30°C/60%RH) 4. Weight 5. Packaging Information (Tube) (Tape & Reel) 245°C MSL = 4 (72 Hours, ≤30°C/60%RH) 1.4 grams 1.4 grams 27 pieces/tube 27 pieces/tube 700 pieces/13” reel 700 pieces/13” reel Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25 PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 Product performance is limited to specified parameters. Data is subject to change without prior notice. CSB5162G & -RC Rev. 5 9/2/08 JDG TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com