Low Pass Filter for Cable Modem Applications ELECTRONICS INC. EPB5203G & EPB5203G-RC • Integrated LPF designed to work with Texas Instruments 4522 • Robust construction allows for IR/VP processes • Add “-RC” after part number for RoHS Compliant Electrical Parameters @ 25°C Cut-Off Frequency (MHz Typ.) Insertion Loss (dB Max.) Return Loss (dB Min.) Attenuation (dB Min.) Group Delay (nS Max.) 5-60 MHz 5 -60 MHz 65 MHz 75 MHz 100 MHz 150-500 MHz 1-65 MHz -1.5 -15 -13 -7 -25 -35 35 68 • Characteristics Filter Impedance : 75 Ω/75 Ω • Channel-Channel Crosstalk : -60 dB Typ. (5-65 MHz) • Package Schematic .490 (12.44) .085 (2.16) .100 (2.54) .085 (2.16) PCA EPB5203G(-RC) Date Code .270 (6.86) .450 (11.43) 4 1 LPF & Isolation Xfmr 5 Pad Layout Pin 1 I.D. 2, 3, 6, 7, & 8 .030 (.762) .300 (7.62) .010/.020 (.254/.508) .250 (6.35) .040 (1.02) .016/.020 (.406/.508) .100 (2.54) .008/.012 (.203/.304) 0°-8° .400 (10.20) Notes : 1. Lead Finish EPB5203G EPB5203G-RC SnPb Hot Tin Dip (Sn) † 2. Peak Temperature Rating 225°C 3. Moisture Sensitive Levels MSL = 3 4. Weight (Tube) 5. Packaging Information (*Add “TR” to end of part number, but (Tape & Reel) in front of “-RC”when placing order) 245°C MSL = 4 (168 Hours, ≤30°C/60%RH) (72 Hours, ≤30°C/60%RH) TBD grams TBD grams TBD pieces/tube TBD pieces/13” reel TBD pieces/tube TBD pieces/13” reel (*EPB5203GTR) (*EPB5203GTR-RC) † Hot tin dipped over Matte Tin with Ni Barrier Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25 PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 Product performance is limited to specified parameters. Data is subject to change without prior notice. CSB5203G Rev. 8 9/13/06 JDG TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com