10Base-T Interface Module with Enhanced Common Mode Attenuation ELECTRONICS INC. EPE6030G • Optimizied for AMD/PHY Controllers • Robust construction allows for toughest reflow processing • Complies with or exceeds IEEE 802.3, 10Base-T Standards Electrical Parameters @ 25° C Cut-Off Frequency (MHz) Insertion Loss (dB Max.) Return Loss (dB Min.) ± 1.0 MHz Xmit/Rcv 1-10 MHz 5-10 MHz @ 20 MHz 50-70 MHz @ 50 MHz @ 100 MHz @ 200 MHz 1-10 MHz Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv 17/17 -1/-1 -18/-18 -7/-5 -18/-11 -30/-16 -33/-26 -30/-30 -30/-30 -25/-25 -35/-35 • Attenuation (dB Min.) Common Mode Rejection (dB Min.) @ 25 MHz @ 30 MHz Crosstalk (dB Min.) Isolation : Meets or exceeds 802.3 IEEE Requirements • Characteristic Filter Impedance : 100 Ω • • *Referenced to the filter output @ 5 MHz for filter only, excluding resistor network • Schematic 1 2 Transmit Channel 61.9Ω Receive Channel 14 422Ω 49.9Ω 8 1.2KΩ LPF 5 3 LPF 15 6 1:1 61.9Ω 11 4 12 49.9Ω 7 1:1 10 16 422Ω 9 Package .900 (22.86) Pin 1 I.D. .055 (1.40) .100 (2.54) .085 (2.16) PCA EPE6030G Date Code .385 (9.78) .540 (13.72) .700 (17.78) .265 (6.73) Pad Layout .030 (.762) .010/.015 (.254/.381) .008/.012 (.203/.305) 0°-8° .035 (.889) .018/.022 (.457/.559) .500 (12.70) .100 (2.54) Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25 PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 Product performance is limited to specified parameters. Data is subject to change without prior notice. CSE6030G Rev. Orig. 8/6/02 TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com