10Base-T Interface Module ELECTRONICS INC. EPE6334G • General purpose 10Base-T Filter Module • Robust construction allows for toughest reflow processing • Complies with or exceeds IEEE 802.3, 10Base-T Standards Electrical Parameters @ 25° C Cut-Off Frequency (MHz) Insertion Loss (dB Max.) Return Loss (dB Min.) ± 1.0 MHz Xmit/Rcv 1-10 MHz 5-10 MHz @ 20 MHz @ 25 MHz @ 30 MHz @ 40 MHz @ 50 MHz @ 100 MHz @ 200 MHz 1-10 MHz Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv 17/17 -1/-1 -15/-15 -7/-5 -18/-11 -30/-18 -35/-26 -45/-40 -50/-50 -40/-40 -35/-35 • Attenuation (dB Min.) Common Mode Rejection (dB Min.) Isolation : meets or exceeds 802.3 IEEE Requirements • Crosstalk (dB Min.) Characteristic Filter Impedance : 100 Ω • Schematic Transmit Channel Receive Channel 8 1 Chip Side LPF UTP Side LPF Chip Side 6 3 9 16 UTP Side 11 14 1:1 1:1 5 12 Package .920 (23.36) Pin 1 I.D. .090 (2.29) .100 (2.54) .110 (2.79) PCA EPE6334G Date Code .380 (9.65) .540 (13.72) .700 (17.78) .225 (5.71) Pad Layout .040 (1.02) .010/.015 (.254/.381) .008/.012 (.203/.305) 0°-8° .035 (.889) .016/.022 (.406/.559) .500 (12.70) .100 (2.54) Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25 PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 Product performance is limited to specified parameters. Data is subject to change without prior notice. CSE6334G Rev. 1 7/14/03 TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com