10/100 LAN Interface Module for NIC/HUB Applications ELECTRONICS INC. EPF8051G & EPF8051G-RC • Ideal for QSI6611/12 in applications requiring higher bandwidth • Guaranteed to operate with 8 mA DC bias at 70°C on Cable Side • Complies with or exceeds IEEE 802.3, 10/100Base-TX Standards • Add “-RC” after part number for RoHS Compliant • Storage Temperature : -40°C to +125°C • Operating Temperature : 0°C to +70°C Electrical Parameters @ 25° C OCL @ 70°C Insertion Loss (dB Max.) 100 KHz, 0.1 Vrms 8 mA DC Bias Cable Side 1-80 MHz 80-100 MHz Return Loss (dB Min.) 100-150 MHz 1-30 MHz 30-60 MHz Common Mode Rejection (dB Min.) 60-100 MHz 1-30 MHz 30-100 MHz 100-500 MHz 5-10 MHz 10-100 MHz -35 -35 Xmit Rcv Xmit Rcv Xmit Rcv Xmit Rcv Xmit Rcv Xmit Rcv Xmit Rcv Xmit Rcv Xmit Rcv 350µH -1 -1 -2 -2 -3.5 -3 -18 -18 -12 -12 -10 -10 -40 -40 -30 -30 Package -10 Schematic Transmit Channel .980 (24.89) .092 (2.344) .100 (2.54) .090 (2.29) PCA EPF8051G(-RC) Date Code .390 (9.91) TD+ 1 16 TX+ CT 2 Pad Layout .560 (14.22) TD- 3 14 TX1.25:1 15 CT .700 (17.78) .233 (5.92) -10 Isolation : 1500 Vrms • Cable Impedance : 100 Ω • Rise Time : 3.0 nS Max. • • Pin 1 I.D. Crosstalk (dB Min.) [Between Channels] .030 (.762) .003/.020 (.076/.508) Receive Channel .008/.012 (.203/.305) 0°-8° RD+ 6 11 RX+ CT 7 .035 (.889) .016/.022 (.406/.559) RD- 8 .510 (12.95) .100 (2.54) Notes : 1. Lead Finish 9 RX1:1 EPF8051G EPF8051G-RC SnPb Hot Tin Dip (Sn) † 2. Peak Temperature Rating 225°C 245°C 3. Moisture Sensitive Levels MSL = 3 MSL = 4 (168 Hours, ≤30°C/60%RH) (72 Hours, ≤30°C/60%RH) 3.172 grams 3.172 grams 4. Weight 5. Packaging Information (Tube) (Tape & Reel) TBD pieces/tube TBD pieces/tube 300 pieces/13” reel 300 pieces/13” reel 10 CT † Lead Material : Ni Barrier over Cu Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25 PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 Product performance is limited to specified parameters. Data is subject to change without prior notice. CSF8051G & -RC Rev. A 7/18/07 JDG TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com