W005G thru W10G Vishay Semiconductors formerly General Semiconductor Glass Passivated Single-Phase Bridge Rectifier Reverse Voltage 50 and 1000V Forward Current 1.5A Case Style WOG Features 0.388 (9.86) 0.348 (8.84) • Plastic package has Underwriters Laboratory Flammability Classification 94V-0 • This series is UL listed under the Recognized Component Index, file number E54214 • Glass passivated chip junction • High case dielectric strength • Typical IR less than 0.1µA • High overload surge current • Ideal for printed circuit boards • High temperature soldering guaranteed: 260°C/10 seconds, 0.375 (9.5mm) lead length, 5lbs. (2.3kg) tension 0.220 (5.6) 0.160 (4.1) 1.0 (25.4) MIN. Dimensions in inches and (millimeters) 0.032 (0.81) 0.060 (1.52) 0.028 (0.71) 0.020 (0.51) Mechanical Data Case: Molded plastic body over passivated junctions Terminals: Plated leads solderable per MIL-STD-750, Method 2026 Mounting Position: Any Weight: 0.04 oz., 1.1 g Packaging codes/options: 1/100 EA. per Bulk Bag 0.220 (5.6) 0.348 (8.84) 0.180 (4.6) 0.308 (7.82) 0.220 (5.6) 0.180 (4.6) Maximum Ratings & Thermal Characteristics Parameter Ratings at 25°C ambient temperature unless otherwise specified. Symbols W005G W01G W02G W04G W06G W08G W10G Units Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V Maximum average forward rectified current at 0.375" (9.5mm) lead length at TA=25°C IF(AV) 1.5 A Peak forward surge current single sine-wave superimposed on rated load (JEDEC Method) IFSM 50 A I2t 10 A2sec RΘJA RΘJL 36 11 °C/W TJ -55 to +150 °C TSTG -55 to +150 °C Rating for fusing (t<8.3ms) Typical thermal resistance per leg (1) Operating junction temperature range Storage temperature range Electrical Characteristics Ratings at 25°C ambient temperature unless otherwise specified. Parameter Symbols W005G W01G W02G W04G W06G W08G W10G Units Maximum instantaneous forward voltage drop per leg at 1.0A VF 1.0 V Maximum DC reverse current at rated TA=25°C DC blocking voltage per leg TA=125°C IR 5.0 500 µA Typical junction capacitance per leg at 4.0V, 1MHz CJ 14 pF Notes: (1) Thermal resistance from junction to ambient and from junction to lead at 0.375" (9.5mm) lead length P.C.B. mounting Document Number 88769 19-Feb-02 www.vishay.com 1 W005G thru W10G Vishay Semiconductors formerly General Semiconductor Ratings and Characteristic Curves (TA = 25°C unless otherwise noted) Fig. 1 — Derating Curve Output Rectified Current 60 1.4 1.2 0.375" (9.5mm) P.C.B. 1.0 Copper Pads 0.22 x 0.22" (5.5 x 5.5mm) 0.8 0.6 0.4 0.2 0 20 Capacitive Load I(pk) 5.0 = 10 I(AV) 20 Peak Forward Surge Current (A) Average Forward Output Current (A) 1.6 60 HZ Resistive or Inductive Load Fig. 2 — Maximum Non-Repetitive Peak Forward Surge Current Per Leg TA = 25°C Single Sine-Wave (JEDEC Method) 50 40 30 20 10 1.0 Cycle 0 60 40 10 1 140 150 120 100 80 Ambient Temperature (°C) Number of Cycles at 60 HZ Fig. 3 — Typical Forward Characteristics Per Leg Fig. 4 — Typical Reverse Leakage Characteristics Per Leg 50 Instantaneous Reverse Current (µA) Instantaneous Forward Current (A) 20 10 TJ = 25°C Pulse Width = 300µs 1% Duty Cycle 1 0.1 0.01 0.4 0.6 0.8 1.0 1.2 TJ = 100°C 1 0.1 TJ = 25°C 0.01 1.6 1.4 10 0 Instantaneous Forward Voltage (V) 60 80 100 100 TJ = 25°C f = 1.0MHZ Vsig = 50mVp-p 10 1 10 Reverse Voltage (V) 100 Transient Thermal Impedance (°C/W) Junction Capacitance (pF) 40 Fig. 6 — Typical Transient Thermal Impedance 100 www.vishay.com 2 20 Percent of Rated Peak Reverse Voltage (%) Fig. 5 — Typical Junction Capacitance Per Leg 1 0.1 100 10 1 0.1 0.01 0.1 1 10 100 t, Heating Time (sec.) Document Number 88769 19-Feb-02