WWW.PHIHONG.COM 30 Watt Universal 2-Wire Input Medical Adapter PSAM30R Series Adapter Meets CEC and EISA Requirements V071146 Features • • • Double Insulated < 100uA Leakage Current Class B EMI • • • No Load Power Draw < 0.5W at 115VAC No Load Power Draw < 0.75W at 230VAC EISA Energy Efficient Compliance • Patient Hoists • AS/NZS 3260 & 4417 Applications • • Dental Curing Devices Portable Dental Equipment Safety Approvals • • cUL/UL60601-1 CE Mechanical Characteristics • • • • Length: 100mm (3.94in) Width: 63mm (2.48in) Height: 35.7mm (1.41in) Weight: 200g (7.05oz.) Output Specifications Model DC Output Voltage PSAM30R-120 +12V PSAM30R-240 +24V Load Min. Max. 0A 2.5A 0A 1.25A Ripple (1) P-P (max.) 120mV Regulation Line Load ±5% 240mV ±5% Efficiency Level (1) Measured with using 12-inch twisted pair terminated with a 10uF capacitor and 0.1uF ceramic in parallel. Interchangeable clips sold separately. Phihong reserves the right to make changes without further notice. Please consult Phihong USA and visit www.phihong.com for the most up-to-date specifications. PSAM30R Series Characteristics WWW.PHIHONG.COM INPUT: AC Input Voltage Rating Short-Circuit Protection 100 to 240VAC Output can be shorted without damage AC Input Voltage Range 90 to 264VAC ENVIRONMENTAL Temperature AC Input Frequency Operation Non-operation 0 to +40°C -25 to +85°C 47 to 63Hz Relative Humidity Input Current 1.0A (rms) max. @ 115VAC, 60Hz 0.5A (rms) max. @ 230VAC, 50Hz Operation Non-operation 10 to 90% Non-Condensing 10 to 95% Non-Condensing Emissions Leakage Current 100uA max. @ 264VAC, 50hz. FCC Class B EN55022 Class B / CISPR22 Class B Inrush Current (cold start @ ambient 25°C) Immunity 30A for 115VAC at max. load 60A for 230VAC at max. load > 80.6% average efficiency (Level IV) EN 50082-1: (EN55024) EN 61000-4-2, Level 3 EN 61000-4-3, Level 2 EN 61000-4-4, Level 2 EN 61000-4-5, Level 3 EN 61000-4-6, Level 2 EN 61000-4-8 EN 61000-4-11 EN 61000-3-2: Harmonics EN 61000-3-3: Flicker Input Power Saving 0.50W max. for 115VAC, 60Hz at no load (Level IV) 0.75W max. for 230VAC, 50Hz at no load (Level III) OUTPUT: Efficiency Hold-up Time Dielectric Withstand (Hi-pot) Test 10mS Min. @ 115VAC, 60Hz Primary to Secondary: 4000VAC for 1 minute, 10mA Over-Voltage Protection DC Output Connector Included, all models 2.1mm x 5.5mm center positive standard Over-Current Protection AC Input Clips (sold separately) Output equipped with short circuit protection – auto restart US: RPA Europe: RPE UK: RPK Australia: RPS Dimension Diagram Unit: mm