PHIHONG PSC12R-120

WWW.PHIHONG.COM
10W to 12W Interchangeable Plug Series
PSC12R Adapter Series Meets EISA and Energy Star Requirements
Features
• Double Insulated
• Field Changeable AC Plugs
• Efficiency Level V Compliance
Applications
• Wireless Communications
• Networking
Safety Approvals
• cUL/UL
• SAA
Mechanical Characteristics
• Length: 71.7mm (2.82in)
• Width: 45mm (1.77in)
Output Specifications
Model
DC Output
Voltage
Load
Min.
PSC12R-050
PSC12R-090
PSC12R-120
5V
9V
12V
0A
0A
0A
•
•
•
Class B EMI
Less Than 0.3W No-Load Current
Over-Voltage Protection
•
•
Portable Equipment
Peripherals
•
•
CE
C-Tick
•
•
Height: 30.5mm (1.20in)
Weight: 75g (2.65oz)
Max.
Ripple (1)
P-P (max)
Regulation
Line Load
2.0A
1.11A
1.0A
200mV
180mV
240mV
±5%
±5%
±5%
Efficiency
Level
Note: (1) Measured with by-pass capacitors 0.1uf/10uf at output connector terminal and oscilloscope set at 20 mHz. (Tested
by oscilloscope after waiting 1 minute)
Interchangeable clips sold separately.
Phihong is not responsible for any error and change. Content is subject to change without notice. Please consult the
factory and visit www.phihong.com for the most up-to-date specifications.
PSC12R Characteristics
INPUT:
WWW.PHIHONG.COM
ENVIRONMENTAL:
AC Input Voltage Rating
Temperature
100 to 240VAC
Operation
Non-operation
0 to +40°C
-40 to +85°C
AC Input Voltage Range
90 to 264VAC
Humidity (Relative Humidity)
AC Input Frequency
Operation
Non-operation
10% to 90% non-condensing
5% to 95%, non-condensing
47 to 63 Hz
Emissions
AC Input Current
0.5A (RMS) max. @ 120VAC
0.25A (RMS) max. @ 240VAC
FCC Class B
EN55022 Class B
Dielectric Withstand (Hi-pot) Test
Leakage Current
Primary to Secondary: 3000VAC for 1 minute, 10mA
0.25A max. @ 264VAC
DC Output Connector
Inrush Current (Cold Start @ ambient 25°C)
2.1x5.5mm Center Positive Standard
30A for 120VAC at max. load
60A for 240VAC at max. load
Mating Connector
Kycon KLD-0202-A or equivalent
Input Power Saving
0.3W maximum at no load
AC Input Clips (sold separately)
OUTPUT:
US: RPA
Europe: RPE
UK: RPK
Australia: RPS
Efficiency
73.4% minimum average efficiency for 5V model
76.6% minimum average efficiency for 9V model
77.8% minimum average efficiency for 12V model
Hold-up Time
10mS min. @ 120VAC and max. load
Short Circuit Protection
Auto restart
Dimension Diagram Unit: mm