PHIHONG PSC30U-120

WWW.PHIHONG.COM
20-30 Watt Universal 3-Wire Input Adapter
PSC30U Adapter Series Meets CEC and EISA Requirements
Features
• Low Cost
• EISA Energy Efficient Compliance
• Class B EMI
Applications
• Portable Equipment
• Peripherals
Safety Approvals
•
•
Non-vented/Spill-proof Case
Low Profile Design
•
•
Networking
Gaming Machines
• cUL/UL 60950-1
• CE
• C-Tick
Mechanical Characteristics
• Length: 98.5mm (3.88in)
• Width: 55mm (2.17in)
Output Specifications
•
•
•
TUV EN60950-1
SAA
Meeting Cal. Prop. 65
Model
PSC30U-050
PSC30U-120
PSC30U-240
PSC30U-480
DC Output
Voltage
+5V
+12V
+24V
+48V
•
•
Load
Min.
Max.
0A
4.0A
0A
2.5A
0A
1.25A
0A
0.625A
Height: 31.4mm (1.24in)
Weight: 250g (8.82oz.)
Ripple (1)
P-P (max.)
50mV
120mV
240mV
240mV
Regulation
Line
Load
±5%
±5%
±5%
±5%
Efficiency
Level
(1) Measured with using 12-inch twisted pair terminated with a 10uF capacitor and 0.1uF ceramic in parallel.
Phihong reserves the right to make changes without further notice. Please consult Phihong USA and visit
www.phihong.com for the most up-to-date specifications.
PSC30U Characteristics
INPUT:
WWW.PHIHONG.COM
AC Input Voltage Rating
Over-current Protection
100 to 240VAC
Output equipped with short circuit protection – auto
restart
AC Input Voltage Range
90 to 264VAC
Short Circuit Protection
Output can be shorted without damage
AC Input Frequency
47 to 63Hz
ENVIRONMENTAL:
Temperature
Input Current
0.8A (rms) max. @ 115VAC
0.4A (rms) max. @ 230VAC
Operation
Non-operation
0 to +40°C
-30 to +85°C
Humidity
Leakage Current
Operation
5 to 90%
3.5mA Max.
Emissions
Inrush Current (cold)
30A for 115VAC at max. load
60A for 230VAC at max. load
(Cold start @ ambient 25°C)
Input Power Saving
0.5W maximum at no load
OUTPUT:
Efficiency
> 80.6% average efficiency
Hold-up Time
10mS Min. @ 120VAC and Max. load
Over-voltage Protection
Output shuts down and recovers after reset AC power
Dimension Diagram Unit: mm
FCC Class B
EN55022 Class B
Dielectric Withstand (Hi-pot) Test
Primary to Secondary: 1500VAC for 1 minute, 10mA
DC Output Connector
2.1x5.5mm Center Positive Standard