PTRH 30 AMP Power PCB Relay FEATURES Most popular power PCB relay Up to 30 amp switching capacity Up to 2 horsepower rating Gold flashed contacts available UL Class B insulation standard UL Class F insulation available Available with UL 873 spacing Epoxy sealed, immersion cleanable Now available Lead Free & RoHS Compliant File # E93379 UL/CSA RATINGS Load Type Voltage 1 Form C (SPDT) 1 Form A (SPST-NO) 1 Form B (SPST-NC) NO NC General Purpose 120 VAC 250 VAC 30 VDC 30 A 30 A 30 A 20 A 20 A 20 A 30 A 30 A 30 A 20 A 20 A 20 A Resistive ( 100,000 cycles) 120 VAC 250 VAC 30 A 30 A 20 A 20 A 30 A 30 A 20 A 20 A Motor ( 30,000 cycles ) 250 VAC 120 VAC 2 HP 1 HP 2 HP 1 HP 250 VAC 120 VAC 80 A/30 A 96 A/30 A 80 A/30 A 96 A/30 A LRA/FLA (locked rotor amps/full load amps) CONTACT DATA AgCdO (Silver Cadmium Oxide), AgSnOInO (Silver Tin Oxide Indium Oxide) Material Initial Contact Resistance Service Life 50 milliohms max @ 0.1A, 6VDC Mechanical 1 X 10 7 Operations Electrical 1 X 10 5 Operations CHARACTERISTICS Operate Time Less than 15 ms. Release Time Les than 10 ms. Insulation Resistance Dielectric Strength 1,000 megohms min, at 500VDC, 50%RH 1500 Vrms, 1 min. between open contacts 1500 Vrms, 1 min. between coil and contacts (2500 Vrms for -1) Shock Resistance 10 g, 11ms, functional; 100 g, destructive Vibration Resistance DA 1.5mm, 10-55 Hz Power Consumption 0.9W, approx. Ambient Temperature Range -55 degrees C to 85 degrees C operating for class B, -40 to 130 degrees C storage Weight 30 grams approx. PTRH Rev D 3-25-04 3220 Commander Drive, Suite 102, Carrollton, Texas 75006 Sales: Call Toll Free (888)997-3933 Fax (818) 342-5296 email: [email protected] URL: pickercomponents.com PAGE 1 PTRH PTRH ORDERING INFORMATION Example: PTRH -1C -12 S T F -X -1 Model Contact Form 1A, 1B, or 1C Coil Voltage Configuration Nil: Open Frame; S: Sealed plastic case; C: Dust Cover Insulation Material Nil: UL Class B; F: UL Class F Contact Material G: AgCdO+Au T: AgSnOInO; Nil: AgCdO; Spacing -1: UL 873 (Pin # 6 omitted) Nil: UL 508; Nil: Standard; -X ROHS Compliant COIL DATA Coil Voltage Resistance _ 10% ohms + 5 Must Operate Voltage Max. Must Release Voltage Min. Continuous Voltage Max. (VDC) (VDC) (VDC) 3.75 0.5 5.5 27 6 40 4.50 0.6 6.6 9 97 6.75 0.9 9.9 12 155 9.00 1.2 13.2 24 660 18.00 2.4 26.4 48 2560 36.00 4.8 52.8 11.0 121.0 110 10330 82.50 Note: Custom coil voltages within the ranges shown are available on special order. Overall Dimensions Inches (millimeters) 1.05 (26.7) max Note 2. Pin Layout Schematic Bottom View .770 (19.6) max .210 Ref. (5.3) .400 (10.2) .300 (7.62) 5 4 .700 (17.8) .600 (15.2).500 (12.7) 1 1.25 (31.8) max 3 Note 1. 2 6 Notes: 1. This pin omitted for UL 873 version. 2. Breakable nib may be removed after flux removal. .150 (3.8) Note 1. .350 (8.9) .550 (14) .700 (17.8) Tolerances + .010 unless otherwise noted Holes for load term. .081 + .005 Dia. (2.06 + .13) Holes for Coil term. .043 + .003 Dia. (1.09 + .08) 3220 Commander Drive, Suite 102, Carrollton, Texas 75006 Sales: Call Toll Free (888) 997-3933 Fax (818) 342-5296 email: [email protected] URL: pickercomponents.com PAGE 2