PLETRONICS TCF4029031D

TCF4 Series
TCVCXO Oscillator
January 2009
• Pletronics’ TCF4 Series is a temperature
compensated voltage controlled crystal
oscillator with a clipped sinewave output.
• The package is designed for high density
surface mount designs.
• Tape and Reel packaging is available.
• 10 to 40 MHZ
• 2.0 x 2.5 mm LCC Ceramic Package
• Optional Voltage Control Function
Pletronics Inc. certifies this device is in accordance with the
RoHS 6/6 (2002/95/EC) and WEEE (2002/96/EC) directives.
Pletronics Inc. guarantees the device does not contain the following:
Cadmium, Hexavalent Chromium, Lead, Mercury, PBB’s, PBDE’s
Weight of the Device: 0.13 grams
Moisture Sensitivity Level: 1 As defined in J-STD-020C
Second Level Interconnect code: e4
Absolute Maximum Ratings:
Parameter
Unit
VCC Supply Voltage
-0.5V to +6.5V
Vi
Input Voltage
-0.5V to VCC + 0.5V
Vo
Output Voltage
-0.5V to VCC + 0.5V
Thermal Characteristics
The maximum die or junction temperature is 155oC
The thermal resistance junction to board is 30 to 50oC/Watt depending on the solder pads, ground plane
and construction of the PCB.
ESD Rating
Model
Minimum Voltage
Conditions
Human Body Model
1500
MIL-STD-883 Method 3115
Charged Device Model
1000
JESD 22-C101
Product information is current as of publication date. The product conforms
to specifications per the terms of the Pletronics standard warranty. Production
processsing does not necessarily include testing of all parameters.
Copyright © 2009, Pletronics Inc.
TCF4 Series
TCVCXO Oscillator
January 2009
Part Number:
TCF4
031
035
G
H
015
008
-12.75M
-XX
Internal code or blank
Nominal Frequency in MHZ
Pullability in ppm (Vcontrol)
000 = TCXO only
008 = +
_ 8 ppm minimum
015 = +
_ 15 ppm minimum
Stability in ppm
010 = +
_ 1 ppm
015 = +
_ 1.5 ppm
025 = +
_ 2.5 ppm
Highest Specified Operating Temperature
A = +40oC E = +60oC J = +80oC
B = +45oC F = +65oC K = +85oC
C = +50oC G = +70oC
D = +55oC H = +75oC
Lowest Specified Operating Temperature
J = -30oC
A = +10oC E = -10oC
o
o
F = -15 C
K = -35oC
B = +5 C
o
o
G = -20 C
L = -40oC
C = +0 C
H = -25oC
M = -45oC
D = -5oC
Highest Supply Voltage *
035 = 3.5 volts for 3.3 volts nominal
031 = 3.1 volts for 3.0 volts nominal
026 = 2.6 volts for 2.5 volts nominal
Lowest Supply Voltage *
031 = 3.1 volts for 3.3 volts nominal
029 = 2.9 volts for 3.0 volts nominal
024 = 2.4 volts for 2.5 volts nominal
Series (Part Type, Logic & Package)
* Supply Voltage: Select range between 2.7V and 5.0V with Highest / Lowest < 1.10
For Example: the part number for 3.3V nominal would be TCE4032034.........
Part Marking:
XXXXXX
Pwwyzz
www.pletronics.com
Where:
425-776-1880
XXXXX = process code for crystal
wwyzz = Date code
2
TCF4 Series
TCVCXO Oscillator
January 2009
Electrical Specification for specified Vcc range of 2.3V through 3.7V with a
variation of ±5% over the specified temperature range
Item
Min
Typ
Max
Unit
10
-
40
MHZ
-2.5
-0.5
-
+2.5
+0.5
ppm
Vcontrol 1.50 volts if used 2
-2
0
+2
ppm
Vcontrol 1.50 volts at 25oC
Frequency Stability vs. Supply
-0.2
0
+0.2
ppm
Load: 10K ohm // 10 pF & Vcc +
_ 5%
Frequency Stability vs. Load
-0.2
0
+0.2
ppm
Load: 10K ohm // 10 pF +
_ 5%
Load: 10K ohm +
_ 10% // 10 pF +
_ 10%
Frequency Range
Frequency Accuracy Range 1
Frequency setting
Output Waveform
Condition
Clipped Sinewave
Output Level
0.8
-
1.1
V p-p
-
-110
-130
-145
-145
-
dBc/Hz
2.3
-
3.7
Volts
-
-
2.0
mA
Aging
-1.0
-
+1.0
ppm
Per year at 25oC
Vcontrol Range
0.5
-
2.50
Volts
1.50 volts nominal
-5
±3
+5
ppm
Phase Noise
100 Hz
1 KHz
10 KHz
100 KHz
V Supply Range 1
VCC
Supply Current
ICC
Frequency Pullability 1
Operating Temperature Range
Storage Temperature Range
1
2
1
-30
+85
o
-55
+95
o
C
C
Specified by part number
For all supply voltages, load changes, aging for 1 year, shock, vibration and temperatures
Reliability: Environmental Compliance
Parameter
Condition
Mechanical Shock
MIL-STD-883 Method 2002, Condition B
Vibration
MIL-STD-883 Method 2007, Condition A
Solderability
MIL-STD-883 Method 2003
Thermal Shock
MIL-STD-883 Method 1011, Condition A
www.pletronics.com
425-776-1880
3
TCF4 Series
TCVCXO Oscillator
January 2009
Package Labeling
Label is 1" x 2.6" (25.4mm x 66.7mm)
Font is Courier New
Bar code is 39-Full ASCII
(the label will show the TCF4 actual part number)
Label is 1" x 2.6" (25.4mm x 66.7mm)
Font is Arial
Mechanical:
Inches
6
1
5
2
4
1
Not to Scale
Contacts: Gold 11.8 µinches 0.3 µm minimum
over Nickel 50 to 350 µinches 1.27 to 8.89 µm
Pad
3
Typical dimensions
mm
A
0.098 +
_0.008
2.50 +
_0.20
B
0.079 +
_0.008
2.00 +
_0.20
C
0.040 max
1.0 max
D1
0.072
1.84
E1
0.047
1.20
F1
0.030
0.75
G1
0.091
2.30
H1
0.061
1.55
J1
0.028
0.70
Function
Note
1
Vcontrol Input
If this function is not specified, recommend connecting this pad to ground.
2
none
No connection or Ground. Ground is recommended)
3
Ground (GND)
4
Output
5
none
No connection or Ground. Ground is recommended)
6
Supply Voltage (VCC)
Recommend connecting appropriate power supply bypass capacitors as close
as possible.
www.pletronics.com
425-776-1880
4
TCF4 Series
TCVCXO Oscillator
January 2009
Reflow Cycle (typical for lead free processing)
260°C Maximum
10 Seconds Maximum
Temperature (°C)
250
215°C±10°C
200
175°C±10°C
150
100
Approximately 50 Seconds
120 to 160 Seconds
Allowed rate of temperature change
Maximum 4°C per second
The part may be reflowed 2 times without degradation.
Tape and Reel: available for quantities of 250 to 1000 per reel, cut tape for < 250
Constant Dimensions Table 1
Tape
Size
D0
8mm
D1
Min
E1
P0
1.0
12mm
1.5
16mm
+0.1
-0.0
24mm
P2
S1
Min
T
Max
0.6
0.6
T1
Max
2.0
+0.05
_
1.5
1.75
4.0
1.5
_
+0.1
_0.1
+
0.1
2.0
_
+0.1
1.5
Variable Dimensions Table 2
Tape
Size
B1
Max
E2 Min
F
P1
T2
Max
W
Max
Ao, Bo &
Ko
16 mm
12.1
14.25
7.5 _
+0.1
8.0 +
_0.1
8.0
16.3
Note 1
Note 1: Embossed cavity to conform to EIA-481-B
Dimensions in mm
Not to scale
REEL DIMENSIONS
A
B
inches
7.0
10.0
13.0
mm
177.8
254.0
330.2
inches
2.50
4.00
3.75
mm
63.5
101.6
95.3
Tape
Width
16.4
+2.0
-0.0
16.0
C
mm
D
mm
13.0 +0.5 / -0.2
16.4
+2.0
-0.0
16.4
+2.0
-0.0
Reel dimensions may vary from the above
www.pletronics.com
425-776-1880
5
TCF4 Series
TCVCXO Oscillator
January 2009
IMPORTANT NOTICE
Pletronics Incorporated (PLE) reserves the right to make corrections, improvements, modifications and
other changes to this product at anytime. PLE reserves the right to discontinue any product or service
without notice. Customers are responsible for obtaining the latest relevant information before placing
orders and should verify that such information is current and complete. All products are sold subject to
PLE’s terms and conditions of sale supplied at the time of order acknowledgment.
PLE warrants performance of this product to the specifications applicable at the time of sale in accordance
with PLE’s limited warranty. Testing and other quality control techniques are used to the extent PLE
deems necessary to support this warranty. Except where mandated by specific contractual documents,
testing of all parameters of each product is not necessarily performed.
PLE assumes no liability for application assistance or customer product design. Customers are
responsible for their products and applications using PLE components. To minimize the risks associated
with the customer products and applications, customers should provide adequate design and operating
safeguards.
PLE products are not designed, intended, authorized or warranted to be suitable for use in life support
applications, devices or systems or other critical applications that may involve potential risks of death,
personal injury or severe property or environmental damage. Inclusion of PLE products in such
applications is understood to be fully at the risk of the customer. Use of PLE products in such applications
requires the written approval of an appropriate PLE officer. Questions concerning potential risk
applications should be directed to PLE.
PLE does not warrant or represent that any license, either express or implied, is granted under any PLE
patent right, copyright, artwork or other intellectual property right relating to any combination, machine or
process which PLE product or services are used. Information published by PLE regarding third-party
products or services does not constitute a license from PLE to use such products or services or a warranty
or endorsement thereof. Use of such information may require a license from a third party under the
patents or other intellectual property of the third party, or a license from PLE under the patents or other
intellectual property of PLE.
Reproduction of information in PLE data sheets or web site is permissible only if the reproduction is
without alteration and is accompanied by associated warranties, conditions, limitations and notices.
Reproduction of this information with alteration is an unfair and deceptive business practice. PLE is not
responsible or liable for such altered documents.
Resale of PLE products or services with statements different from or beyond the parameters stated by
PLE for that product or service voids all express and implied warranties for the associated PLE product or
service and is an unfair or deceptive business practice. PLE is not responsible for any such statements.
Contacting Pletronics Inc.
Pletronics Inc.
19013 36th Ave. West
Lynnwood, WA 98036-5761 USA
Tel: 425-776-1880
Fax: 425-776-2760
E-mail: [email protected]
URL: www.pletronics.com
Copyright © 2009, Pletronics Inc.
www.pletronics.com
425-776-1880
6