PLX OXUPCI952

PLX Technology Acquired Oxford
Semiconductor in January 2009
This document is not yet formatted to PLX style
For more information, please visit our Website
Website:
Sales:
Technical Support:
www.plxtech.com
www.plxtech.com/sales
www.plxtech.com/support
© 2009 PLX Technology, Inc. All rights reserved.
OXuPCI952
Universal PCI bridge to dual serial and parallel port
Description
Features
Part of Oxford Semiconductor’s family of high
o
3.3V or 5V operation
o
2 high performance UARTs with peak
performance serial connectivity solutions, the
OXuPCI952 is a single chip, dual serial and
parallel port solution for universal PCI based
asynchronous data rates up to 15Mbps
o
RS232/422/485 full and half duplex interfaces
o
Deep 128-Byte receive/transmit FIFOs
Incorporating Oxford Semiconductor’s ultra high
o
Full modem interface with hardware out of
outstanding system performance with unrivalled
o
Programmable RS485 turnaround delay
o
Automated Xon/Xoff in-band flow control
o
Flexible clock prescalar allows for a wide range
connectivity.
band flow control
performance 950 UART technology, it combines
flexibility for even the most demanding of serial
applications.
of baud rates
Complete with development tools and certified
device drivers, effectively reducing design cycles
and accelerating time to market, the OXuPCI952 is
o
Infra-red (IrDA) receive and transmit operation
o
IEEE 1284 Compliant SPP, EPP and ECP Parallel
the ideal connectivity solution for a diverse range
of
products
including:
PC
Add-on
Cards,
Industrial PC, Point of Sale Terminals, Industrial
Control,
Building
Automation
and
Management.
Network
Port
o
8 bit pass-through local bus for port expansion
o
11 GPIOs
o
PCI 3.0 and Power Management 1.1 compliant
o
Software compatible with industry standard
16C550 type devices
o
176 LQFP package
o
Industrial temperature range (-40 to +85°C)
o
Certified device drivers for a wide range of
operating systems including Windows Vista/XP
and Linux
Copyright 2007, Oxford Semiconductor, Inc.
October 2007, REV. 1.0
Outstanding Performance
The
OXuPCI952
integrates
two
ultra
high
performance Oxford 950 UARTs that combine
class leading 15Mbps asynchronous data rates
and the industry’s deepest FIFOs, for maximum
throughput, minimum CPU overhead and optimal
system performance. Advanced features of the
device, such as automated in-band flow control,
readable FIFO levels and RS485 turnaround delay,
provide further scope to fine tune performance,
while the flexible clock pre-scaler provides a wide
range of baud rates.
To
support
these
advanced
features
the
OXuPCI952 is backed by a dedicated Oxford
device driver that is quality assured, exhaustively
tested and WHQL approved; saving development
time and providing peace of mind.
Development environment
The OXuPCI952 evaluation kit supports rapid
evaluation and design for accelerated time to
market.
Central to this is the short form PCI evaluation
board; plugged into any PCI card slot it provides
access to all aspects of the device. But, it doesn’t
stop there; the kit has everything needed for PC
installation
and
evaluation
including
cables,
expansion brackets and Oxford’s device drivers.
The
inclusion
compatible
of
OXide,
development
Oxford’s
tool,
Windows
makes
device
configuration and management fast and easy.
Evaluation kit contents
• OXuPCI952 evaluation board
• OXuPCI952 chip samples x 2
• 4-way serial breakout cable
• Parallel port expansion bracket
• Evaluation CD including:
–
OXide
–
Device Drivers
–
Documentation
Contact details
Sales email: [email protected]
Web: www.oxsemi.com
Copyright 2007, Oxford Semiconductor, Inc.
October 2007, REV. 1.0