SHROUDED SPLIT BOBBIN HIGH ISOLATION POWER TRANSFORMERS Parts are UL & CSA Recognized Under UL File E244637 Ê 115/230V, 50/60Hz Dual Primaries Ë Low Capacitive Coupling Minimizes Line Noise Ì Dual Secondaries May Be Series -OR- Parallel Connected Í PVD-SERIES 6-SIZES: 2.5 TO 56VA Î 4000Vrms Isolation (Hi-Pot) Ï Shrouded Split Bobbin Construction ELECTRICAL SPECIFICATIONS AT 25OC - OPERATING TEMPERATURE RANGE -25OC TO +80OC P/N SIZE DUAL (VA) 115/230V PVD-102 2.5 PVD-105 5 PVD-1010 10 PVD-1020 20 PVD-1030 30 PVD-1056 56 SECONDARY RMS RATINGS 10V C.T. @ .25A 10V C.T. @ .50A 10V C.T. @ 1.00A 10V C.T. @ 2.00A 10V C.T. @ 3.00A 10V C.T. @ 5.60A 5V @ .50A 5V @ 1.00A 5V @ 2.00A 5V @ 4.00A 5V @ 6.00A 5V @ 11.20A PVD-122 PVD-125 PVD-1210 PVD-1220 PVD-1230 PVD-1256 2.5 5 10 20 30 56 12.6V C.T. @ .20A 12.6V C.T. @ .40A 12.6V C.T. @ .80A 12.6V C.T. @ 1.60A 12.6V C.T. @ 2.40A 12.6V C.T. @ 4.40A 6.3V @ .40A 6.3V @ .80A 6.3V @ 1.60A 6.3V @ 3.20A 6.3V @ 4.80A 6.3V @ 8.80A PVD-162 PVD-165 PVD-1610 PVD-1620 PVD-1630 PVD-1656 2.5 5 10 20 30 56 16V C.T. @ .15A 16V C.T. @ .31A 16V C.T. @ .62A 16V C.T. @ 1.25A 16V C.T. @ 1.90A 16V C.T. @ 3.50A 8V @ .30A 8V @ .62A 8V @ 1.25A 8V @ 2.50A 8V @ 3.80A 8V @ 7.00A PVD-202 PVD-205 PVD-2010 PVD-2020 PVD-2030 PVD-2056 2.5 5 10 20 30 56 20V C.T. @ .12A 20V C.T. @ .25A 20V C.T. @ .50A 20V C.T. @ 1.00A 20V C.T. @ 1.50A 20V C.T. @ 2.80A 10V @ .24A 10V @ .50A 10V @ 1.00A 10V @ 2.00A 10V @ 3.00A 10V @ 5.60A SERIES PARALLEL SCHEMATIC PVD-242 PVD-245 PVD-2410 PVD-2420 PVD-2430 PVD-2456 2.5 5 10 20 30 56 24V C.T. @ .10A 24V C.T. @ .21A 24V C.T. @ .42A 24V C.T. @ .83A 24V C.T. @ 1.25A 24V C.T. @ 2.33A 12V @ .20A 12V @ .42A 12V @ .84A 12V @ 1.66A 12V @ 2.50A 12V @ 4.66A PVD-282 PVD-285 PVD-2810 PVD-2820 PVD-2830 PVD-2856 2.5 5 10 20 30 56 28V C.T. @ .09A 28V C.T. @ .18A 28V C.T. @ .36A 28V C.T. @ .72A 28V C.T. @ 1.06A 28V C.T. @ 2.00A 14V @ .18A 14V @ .36A 14V @ .72A 14V @ 1.44A 14V @ 2.12A 14V @ 4.00A PVD-362 PVD-365 PVD-3610 PVD-3620 PVD-3630 PVD-3656 2.5 5 10 20 30 56 36V C.T. @ .07A 36V C.T. @ .14A 36V C.T. @ .28A 36V C.T. @ .56A 36V C.T. @ .82A 36V C.T. @ 1.56A 18V @ .14A 18V @ .28A 18V @ .56A 18V @ 1.12A 18V @ 1.64A 18V @ 3.12A SECONDARY RMS RATINGS SERIES PARALLEL DUAL PRIMARIES: Series for 230V - 50/60Hz Parallel for 115V - 50/60Hz HI-POT: 4000Vac Primary To Secondary 4000Vac Windings to Core 130OC Insulation System SEC #1A 3 9 4 10 PRI #2 115V 50/60Hz SIZE (VA) APPLICATION WHITE DOT ON BOBBIN DENOTES PIN#1 7 1 PRI #1 115V 50/60Hz P/N DUAL 115/230V Note: Primary and Secondary windings are designed to be used as one primary & one secondary winding. That is, they must each be used simultaneously either parallel or series connected. SEC #1B 6 12 INDICATES POLARITY Specifications subject to change without notice. pvd 4/97 20381 BARENTS SEA CIRCLE, LAKE FOREST, CA 92630 • TEL: (949) 452-0511 • FAX: (949) 452-0512 • http://www.premiermag.com 1 SHROUDED SPLIT BOBBIN HIGH ISOLATION POWER TRANSFORMERS PVD-XXX MECHANICAL L WHITE DOT PIN#1 I.D. W P PVD-XXXX M YYWW F (SQ.) 1 A 3 B 4 H .187 6 12 (4.75) C MIN DxE = 4 EA THROUGH HOLES FOR OPTIONAL (#6) MOUNTING SCREW 30 & 56 VA SIZES ONLY 6 A E 1 3 4 6 ML -OR- D 7 9 10 ML = 2EA THROUGH HOLE FOR OPTIONAL (#4) MOUNTING SCREW 2.5, 5, 10, 20 VA SIZES ONLY 12 NOMINAL DIMENSIONS IN INCHES SIZE (VA) L W 2.5 5 10 20 30 56 1-5/8 1-5/8 1-7/8 2-1/4 2-5/8 3.000 1-5/16 1-5/16 1-9/16 1-7/8 2-3/16 2.500 H A B 1.125 1.375 1.375 1.625 1.575 1.820 .200 .200 .200 .400 .550 .600 .250 .400 .400 .400 .275 .300 C ML D1 E1 F 1.000 1.000 1.128 1.436 1.680 1.866 1-1/16 1-1/16 1-1/4 1-1/2 ----------- --------------------1-3/4 2.000 --------------------2-3/16 2-1/2 .025 .025 .036 .036 .045 .045 NOTES: 1) 4-HOLE CORNER PATTERN APPLIES TO 30 & 56VA SIZES ONLY 2) WHITE DOT ON TOP OF PART DENOTES PIN#1 VARIATIONS AVAILABLE. FOR INTERMEDIATE VALUES AND/ OR CUSTOM DESIGNS PLEASE CONSULT THE FACTORY. Specifications subject to change without notice. pvd 4/97 20381 BARENTS SEA CIRCLE, LAKE FOREST, CA 92630 • TEL: (949) 452-0511 • FAX: (949) 452-0512 • http://www.premiermag.com 2