Model 2944 Miniature Solderless Stackup Banana Plug FEATURES: Wire firmly held in place with internal set screw. MATERIALS: Miniature Banana Jack: Material: Brass per QQ-B-626, Alloy 360, ½ Hard. Finish: Gold plate per MIL-G-45204, Type II, Class 00 over electroless nickel per MIL-C-26074 Class 1, (.0002/.0003). Miniature Banana Plug Material: Plug Body, Brass per QQ-B-626, Alloy 360, ½ Hard. Spring: Beryllium Copper per QQ-C-533, Alloy 172, Cond. H.T. Finish: Gold plate per MIL-G-45204, Type II, Class 00 over electroless nickel per MIL-C-26074 Cross Hole: .082” (2.09mm) diameter with #3-56 slotted set screw to secure lead wires. Insulation: ABS molded to Banana Jack and Banana Plug Body. RATINGS: Operating Voltage: Hands free usage in controlled voltage environments: 2500 Vrms maximum. For CE compliance: not intended for hand-held use at voltages above 33 Vrms/70 Vdc. Current: 5 Amperes Operating Temperature: +122 F (+50 C) Max. ORDERING INFORMATION: Model: 2944-0 (Black) Model: 2944-2 (Red) All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Sales: 800-490-2361 Fax: 888-403-3360 Technical Support: 800-241-2060 ([email protected]) For “Where to Buy” information, visit the Pomona web site at www.pomonaelectronics.com Rev: 100 D1094060 Page 1 of 1