Model 3788 BNC Female to Minigrabber Test Clip Breakout FEATURES: • Minigrabber® test clip hooks attach to terminal sizes up to .060” diameter • Converts BNC (Male) cables to Minigrabber test clips for test versatility • BNC connector and Minigrabber test clip caps are molded directly onto the wire for pull strength durability and dust and moisture resistance • Minigrabber test clip hooks and BNC center contact are Beryllium Copper for superior strength. • Gold plating of Minigrabber hooks and BNC center contact offers optimum corrosion resistance and low contact resistance to ensure test signal integrity. • Black Minigrabber test clip to BNC shell, red Minigrabber test clip to BNC center contact. MATERIALS: BNC: Nickel plated brass Center Contact: Gold plated Beryllium Copper Wire: 20 AWG, PVC Marking: Model 3788 Minigrabber test clips: Contact: Gold plated Beryllium Copper, Spring: Stainless steel Insulation: Nylon, color: red and black RATINGS: Voltage: Hand-held testing: 30VAC/60VDC Max. Hands free testing in controlled voltage environments: 300VRMS Max. Operating Temperature: +55°C (+131°F) Max. ORDERING INFORMATION: Model 3788 *Custom lengths are available, contact Pomona Technical support: 800-241-2060 ([email protected]) All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Sales: 800-490-2361 Fax: 888-403-3360 Technical Assistance: 800-241-2060 For “Where to Buy” information, visit the Pomona web site at www.pomonaelectronics.com Rev: 101 D1094106 Page 1 of 1