Model 4274 Multi-Stacking Banana Plug Patch Cord with In-Line Fuse Holder Materials Connector: Stacking Banana Plug: Material: Brass body, Beryllium Copper spring, nickel plated. Insulation: Polypropylene. Wire: 18 AWG, 65 x 36 t.c., PVC insulated, 3.7 (.144) O.D. Fuse holder, brass, tin plated. Insulation: PVC. Accepts 6.4 (.25) dia. SFE and AGC fuses (not included). Specifications Model 4274 Multi-Stacking Banana Plug Patch Cord with In-Line Fuse Holder Features • • • • USA: Provides protection from over current. Accepts standard .25 inch (6.4mm) diameter SFE and AGC fuses (fuse not included). Mates to Model #1581, 2854 or any standard banana jack. Vertical and cross stackable. Sales: 800-490-2361 Technical Support: [email protected] Fax: 425-446-5844 Europe: 31-(0) 40 2675 150 International: 425-446-5500 Where to Buy: www.pomonaelectronics.com Operating Temperature: +55ºC (+131ºF) Max. Voltage: For CE Compliance and for personal safety, do not hold in hand when voltages exceed 33Vrms/70Vdc. Maximum voltage for hands free use in a controlled voltage environment: 5000 WVDC Max. Current: 15 Amperes Ordering Information Model: 4274-XX-* XX = Cable Lengths, Standard Lengths: 36” (914) Additional lengths may be quoted upon request. * = Color, -0 Black, -2 Red Ordering Example: 4274-36-2 Indicates 36” in length, color is Red. All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Copyright © 2009 D1094098 Rev. 100 Page 1 of 1