Model 5019 & 5019N Cable Assembly - Minigrabber® Test Clips To Bantam Plug FEATURES: • Shielded cable to reduce noise • Provides quick access from Bantam Jack to terminals • Bantam Plug is molded to the cable to provide optimum durability MATERIALS: Conn.: 1st End - Minigrabber® Contact – Beryllium Copper Spring – Stainless Steel Finish: Contact – Gold Plated Insulation: Handle – Glass filled nylon. Color matches wire. Barrel – Glass filled nylon. Color matches wire. Marking: “Pomona Electronics” “Minigrabber” Breakout Leads: 20 AWG, 41 x 36 T.C., PVC insulated, 2.21 (.087) O.D. Color: Red and Black, Red lead connected to tip, Black lead connected to ring. Molded Breakout: PVC, Color – Gray Cable: 2 conductor shielded stranded copper, 7 x 30, PVC insulated, 4,57 (.180) O.D. Color – Gray Conn.: 2nd End – Bantam Plug (Miniature Phone Plug) Finish: 5019 brass, 5019N nickel plated . Insulation: PVC. Color - Black RATINGS: Operating Temperature: +50°C (+122°F) Max. Operating Voltage: 300 VRMS/DC ORDERING INFORMATION: Model 5019-60 and 5019N-60 Standard Length – 60” (1520mm) Ordering Example: 5019N-60, cable is 60” long with brass nickel plated Bantam connector. All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Made in USA 7/1/02 SY/EH/LS Last saved by Laura Goldberg Sales: 800-490-2361 Fax: 888-403-3360 Technical Assistance: 800-241-2060 C:\Laura Goldberg\FlukeDataSheet \d5019_19N_1_02.doc PomonaACCESS 90295 (800) 444-6785 or (425) 446-6010 More drawings available at www.pomonaelectronics.com Page 1 of 1